HAMPTON BAY ASHBURY GC-41084-SST User manual

THANK YOU
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
HAMPTONBAY.COM
chair
Item #
Item #
Model # GC-41084-SST
ASHBURY DINING SET- SWIVEL CHAIR
10 0 7 9 6 8 6 8 7
10 0 7 8 43 2 9 7
10 0 7 8 43 42 8
10 0 7 8 43 2 9 0
10 0 7 8 43 2 34
1-855-HD-HAMPTON

2
Table of Contents
Table of Contents .................................. . 2
Safety Information . 2
Warranty ......................................... . 2
What is covered .................................. . 2
What is not covered ............................... . 2
Safety Information
2.
Warranty
SAVE THESE INSTRUCTIONS
Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
THIS IS A RESIDENTIAL WARRANTY ONLY AND THIS WARRANTY DOES NOT APPLY TO COMMERCIAL
USE
YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
For a copy of our full limited warranty, please contact our customer service team below.
Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1.
Pre-Assembly. .................................. ..3
Planning Assembly
............................. ..3
Hardware Included ................................3
Package Contents .................................3
Assembly ...................................... ..4
Care and Clea.ning ..................................5
We warrant the frame to be free of manufacturing defects to the original purchaser for three years.
3
.................................
Contact the Customer Service Team at 1-855-HD-HAMPTON visit www.hamptonbay.com.

HAMPTONBAY.COM
Pre-Assembly
3
_
NOTE: More than one person may be required to
complete the assembly of this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA 4
BB 2
CC 4
DD 4
12
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface to
avoid scratching.
PACKAGE CONTENTS
ABCD
AA _ _ _
BB CC EE
_
EE
DD
Part Description Quantity
E Back support bar
1
B Arm support bar 1
A S eat panel
1
CLeft arm
1
D Right arm
1
FS eat support bar 1
G1
I
G
EFH
HChair base 1
4
I
_FF _HH
_II
_
G G
HH
4
II
1
2
G G
FF
M6 x 40 mm combination bolt
M6 x 20 mm combination bolt
M8 washer
M8 x 35 mm bolt
M8 x 2 5 mm bolt
M8 spring washer
8
M8 nut
M6 Allen wrench
M8 Hex wrench
Please contact 1-855-HD-HAMPTON for further assistance.
S teel plate
T-rock

4
Assembly
□
□
NOTE: Please ensure all the bolts are aligned and
assembled correctly. Fully tighten the bolts.
12
3
Attach the lef t arm (C) to the seat panel (A) with M6 x 40 mm
C
B
4
A
D
AA
E
DD
EE
I
G G
FF
EE
G
combination bolts (AA).
hole of arm support bar (B) with M6 x 40 mm combination bolts
NOTE:
K indly note the round hole is f urther away f rom the
correctly. Do not f ully tighten bolts until S tep 3 .
Attaching the arms to the arm support
bar and attaching the seat support bar
(B) with M6 x 20 mm combination bolts (BB).
□Attach the seat support bar (F) to the seat panel (A) with M8
x 25 mm bolts (CC), M8 spring washers (FF) and M8 washers
Attaching the T-rock
□
Attach the T-rock (G) to the seat support bar (F) with four M 8 x 3 5
mm hex bolts (DD) in the order of bolts (DD), M 8 washers (EE),
rectangular steel plates ( ), M 8 washers (EE), M 8 spring washers
(FF) and M 8 nuts (GG).
Tighten all the M 8 x 3 5 mm bolts (DD) using the M 8 hex wrench (II).
□
Ｉ
AA
Attaching the lef t arm to the seat panel
and arm support bar
Attaching the right arm to the seat panel
and back support bar
□
□
Attach the right arm (D) to the seat panel (A) with M6 x 40 mm
combination bolts (AA).
□I nsert the back support bar (E) into the lef t and right arms (C and D)
according the diagram.
Attach the lef t arm (C) to the seat panel (A) through the round
□R otate the arm support bar (B) f orward until the oval holes on
it are aligned with the hole on the bottom of the armrest.
(AA).
hole of arm support bar (B) with M6 x 40 mm combination bolts
Attach the right arm (D) to the seat panel (A) through the round
(AA).
Please ensure all bolts are aligned and assembled
support bar.
Attach the lef t and right arms (C and D) to the arm support bar
□
(EE).
CC
FF
EE
D
B
C
A
F
BB

HAMPTONBAY.COM
5
Care and Cleaning
Do notallow water to buildupinthe frames.Thiswillcausecorrosionandpossible freezingdamageincoldclimates.
Use a mildsoapand waterfornormalcleaning. Do notusejanitorial or alcoholbasedcleaners.Somecleaners may be marked as
natural,butsomeingredients may causediscoloration or have an adverse reaction to yourfinish.
Rinse with cleanwateranddry with a soft,absorbent clothtowel.
Treatthe frames with a liquid wax for maximumprotectionagainst UV raysand/orsalty,dampair.
□
□
□
□
Assembly (continued)
□
Connecting the chair base to the chair
bucket
5
Turn the chair right side up. Insert the chair bucket into the chair base (H).
The chair now is ready for use.
H
□
Please contact 1-855-HD-HAMPTON for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
HAMPTONBAY.COM
Retain this manual for future use.
1-855-HD-HAMPTON