HAMPTON BAY BARNSLEY FSS61119R-2PK User manual

THANK YOU
ally create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item #584-446
Model #FSS61119R-2PK
USE AND CARE GUIDE
BARNSLEY 2 PACK DINING CHAIRS
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM

2
Table of Contents
Table of Contents..........................................................2
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2
Pre-Assembly................................................................ 2
Planning Assembly ..................................................................2
Hardware Included...................................................................2
Assembly ....................................................................... 4
Care and Cleaning ........................................................ 8
Warranty
1 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise if the model in question is no longer in production.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft,
non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
complete the assembly of this product.
HARWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA M8x37 Hex bolt
BB
CC
AA BB CC DD
8
8
M8x28 Hex bolt
M6x18 Bolt 16
DD Metal sheet 4
Part Description Quantity
GG M8 Spring washer
HH
II
8
24
M8 Nut
M8 Plastic washer 8
Wrench 2
JJ
EE M6 Washer 16 KK Hex wrench 1
FF M8 Washer 24
EE
FF
GG
HH
II
JJ
KK
Chair Package Contents ............................................. 3

Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A
Right arm 2
BLeft arm 2
CChair back 2
DSupport tube 2
EBack bar 2
FLeg connector 2
HAMPTONBAY.COM3
Please contact 1-877-527-0313 for further assistance.
D
E
F
AB
C
G
H
GBack cushion
Seat cushion
2
H2

Assembly
1
Connecting the chair back to the support tube
Align two metal sheets (DD) to the support tube (D) over the four holes in the bottom of the chair back (C).
Attach the bottom of the chair back (C) to the support tube (D) with four M8x37 hex bolts (AA), M8 washers (FF),
and M8 plastic washers (II) through the metal sheets (DD), the chair back (C), and the support tube (D).
Secure by attaching M8 washers (FF), M8 spring washers (GG), and M8 nuts (HH) to the ends of the M8x37 hex bolts (AA).
AA
DD
FF
GG
HH
D
C
II
FF
4
NOTE: Loosely tighten the bolts using the wrench (JJ).

Assembly (continued)
2
Connecting the support tube and back bar to the right arms
Place the right arm (A) on a soft surface.
Attach one end of the support tube (D) to the right arm (A) using M8x28 hex bolts (BB), four M8 spring washers (GG), and M8 washers (FF).
Align the holes of the back bar (E) with the holes in the rear portion of the right arm (A).
Secure the back bar (E) to the right arm (A) with M6x18 bolts (CC) and M6 washers (EE).
NOTE: Loosely tighten the bolts using the wrench (JJ)
and the hex wrench (KK).
CC
EE
E
A
BB
GG
FF
GG
HAMPTONBAY.COM5
Please contact 1-877-527-0313 for further assistance.