HAMPTON BAY STATESVILLE FCS70357CS-ST User manual

THANK YOU
y through the purchase of this dining set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item # 1001 186 713
Model # FCS70357CS-ST
USE AND CARE GUIDE
STATESVILLE 5-PIECE DINING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HOMEDEPOT.CA

2
Table of Contents
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Care and Cleaning...................................................... 41.
Important Safety Instructions
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Chair Assembly .............................................................6
Chair Package Contents .......................................................... 4
Important Safety Instructions ................................... 2
Save These Instructions ........................................................2
WARNING: Weight limit for the chairs is 250 lbs
(113.39 kg) for each seat.
WARNING: This dining set is heavy, and may require
two adults for safe assembly.
Read All Instructions Before Use .............................................. 2
WARNING: Do not place more than 125 lbs of objects
on the table top.
Table Package Contents ..........................................................5
WARNING: Do not place heavy objects on the chair.
Table Assembly .......................................................... 21.
Table of Contents ........................................................2
WARNING: This dining set was made for the explicit purpose of providing outdoor functions and is not to be used as a toy.
This product is intended for normal outdoor use; however, the manufacturer recommends storing and / or covering this set
when any formidable / severe weather is approaching.
W
product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is
NOT intended for commercial use and will void the warranty.
To reduce the risk of injury to persons:
1. Close supervision is necessary when this product is used by or
near children, or disabled persons, if applicable.
2. Use this product only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
3. Do not move the chairs while the chairs are occupied. Failure
to obey this caution could result in injury.
CAUTION: When not in use, secure the product in a
cool and covered location.
!
4. This table is not intended to support an umbrella. Umbrella
must have a suitable base or stand.
Warranty .........................................................................3
What is Covered .......................................................................3
What is Not Covered .................................................................3

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
Quantity
AA M6x30 combination bolt 16+1
BB M6x20 combination bolt 16+1
CC M6x15 combination bolt 32+1
FF
EE
DD
CC
BB
AA
DD
EE
FF
M8x20 combination bolt
16+1
Wrench
Hex wrench 2
1
Warranty
2 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty. We
reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.homedepot.ca.
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.

4
Pre-Assembly (continued)
CHAIR PACKAGE CONTENTS
Part
Description
Quantity
A Chair bucket 4
B Left arm 4
C Right arm 4
D
Support bar 4
E Connection bar 8
F
4
Swivel base
F
C
B
D
E
A

Pre-Assembly (continued)
TABLE PACKAGE CONTENTS
Part
Description
Quantity
G Table top 1
H
Table leg 4
I Leg connector 1
5
I
H
G
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.

1
l
6
Chair Assembly
Place the chair bucket (A) upside down on a soft surface.
Attach the support bar (D) to the bottom of the chair bucket (A) using M8x20 combination bolts (DD).
Connecting the support bar to the chair bucket
NOTE: Loosely tighten all the bolts using the wrench (FF).
A
D
DD DD

2
l
7
Chair Assembly (continued)
Connecting the left arm to the chair bucket
Attach the left arm (B) to the chair bucket (A) using M6x30 combination bolts (AA).
NOTE: Loosely tighten all the bolts using the hex wrench (EE).
AA
A
B
AA
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.

3
l
8
Chair Assembly (continued)
Connecting the right arm to the chair bucket
Repeat step 2 to attach the right arm (C) to the chair bucket (A).
A
C
AA AA
NOTE: Loosely tighten all the bolts using the hex wrench (EE).

4
l
9
Chair Assembly (continued)
Connecting the connection bars to the arms
Attach the connection bars (E) to the left and right arms (B & C) using M6x15 combination bolt (CC).
E
C
B
CC
C
B
E
CC
CC
CC
NOTE: Loosely tighten all the bolts using the hex wrench (EE).
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.

5
l
10
Chair Assembly (continued)
Tightening all bolts and connecting the support bar to the swivel base
Turn the chair right side up.
Fully tighten all bolts.
Insert the support bar (D) into the swivel base (F).
D
F