HAMPTON BAY L-FT521PST-3A User manual

Assembly Instructions
Item# L-FT521PST-3A
Parts List:
Tools Required for Assembly:
Wrench (include) and Philips Screwdriver (Not included)
Assembly instructions:
No.
Description
Qty
A
Fire screen
1
B
Cooking grate
1
C
Grate
1
D
Fire bowl
1
E
Ash catcher
1
F
Slate top
1
G
Leg
4
H
Leg connector
4
I
Middle connect piece
1
J
Poker
1
K
PVC cover
1
AA
M6x15 bolt
12
BB
M5x10 bolt
3
CC
M6 flanged nut
12
DD
M5 flanged nut
3
EE
M6 flat washer
8
FF
M6/M5 wrench
1
AA BB CC EE
DD FF
A
B
C
D
E
F
G
H
I
J
H
Step 1: Put Slate top (F) upside down on a soft,
non-abrasive surface, connect Leg (G) to Slate top (F)
with flanged nut CC). Please do not tighten the bolt
here!
Step 2: Connect Leg connector (H) and Middle
connect piece (I) with bolt (AA) and nut (CC). Please
do not tighten the bolt here!
K

Warnings and cautions:
This fire bowl is intended for outdoor use only. Do not use on wooden decks.
This fire bowl is intended to burn wood logs only. Do not burn leaves, or other combustible materials in the fire
bowl.
NEVER LEAVE FIRE UNATTENDED!
The fire bowl is HOT! DO NOT TOUCH or allow children to play near the fire bowl when it is in use. Hot embers
can fly out of the basin in breezy conditions. A fire extinguisher should be readily available.
When the fire bowl is in use, the handle on the mesh screen can reach extreme temperatures that can cause
serious injury to an unprotected hand. Use a poker or an appropriate heat resistant glove or pad when handling.
To avoid destroying the finish, please handle the surface by using a soft cloth instead of your bare hands.
DO NOT TOUCH the surface of the fire bowl when in use, as burns may result.
CARBON MONOXIDE HAZARD!
DO NOT use in the vicinity of flammable objects.
Check local fire regulations and municipal by-laws for safe use.
Step 3: Connect assembled Leg connector (H) and
Leg (G) with bolt (AA) and washer (EE). Tighen all
bols here.
Step 4: Connect ash catcher (E) and fire bowl (D),
tighten with bolt (BB) and flanged nut (DD).
Step 5: Turn over the whole assembled piece. Place Fire
bowl (D), Grate (C), Cooking grate (B) and Fire screen
(A) in order. Use Poker (J) and PVC cover (K) as
necessary.
Now, your firepit is perfect ready for use.

Care & Maintenance:
1. Before using, clean the product completely with a soft dry towel.
2. To extend the life of your fire pit, clean the bowl after each use and cover the unit to protect it from the
elements, cover is not included. Due to natural properties of steel material, if rust develops, please clean rust area
by sanding slightly, then wipe thoroughly and apply touch-up paint if possible.
Limited Warranty:
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of
your item provided the item is maintained with care and used only for personal, residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of 6 months. If any defect is
found, please call our customer service department at 1-866-578-6569 for help. The manufacturer will not cover
transportation or delivery costs, or compensate the individual or any outside party for assembling or
disassembling the product. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Service:
For technical assistance on assembly or replacement parts call Sunjoy Industries at 1(866) 578-6569 from 8:30
AM to 5:30 PM EST or Email [e-mail] or visit www.sunjoydirect.com to place your order
or fax your parts replacement order form together with your purchase receipt to 1 [phone] for assistance.
Made in China