HAMPTON BAY 0000 000 000 User manual

THANK YOU
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
BAYMONT ALUM. SLING CHAISE LOUNGE
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 0000 000 000
Model # 207-317-CL-V2
to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 7.00 p.m. EST, Monday - Friday,
9.00 a.m. - 6.00 p.m. EST, Saturday

2
Table of Contents
Warranty
Pre-Assembly ............................................................3
Planning Assembly... ................................................................3
Hardware Included.................................................................. 3
Package Contents ....................................................................4
Assembly ....................................................................5
Operation ....................................................................7
THREE YEAR FRAME AND TWO YEAR SLING LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
You may contact our customer service department with any questions by phone at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Care & Cleaning
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat the frame with one-step liquid wax for maximum protection
against UV light and salty, damp air. When not in use, store furniture in a cool, dry place.
Important Safety Instructions
IMPORTANT: Please check the tightness of the bolts
periodically.
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
When using a furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this furnishing.
To reduce the risk of injury to persons:
a) Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
b) Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
.deipuccositielihwesiahcehtevomtonoD)c Failure to obey this caution could result in injury.
WARNING:
positions of the chaise lounge back.
Please keep your fingers clear while switching
3 Year Frame 2 and 2 Year Sling Limited Warranty........................
Table of Contents .......................................................2
Important Safety Instructions ............................................2
Warranty .................................................................... 2
..................................................................2
What Is Covered
What Is Not Covered ..................................................................2..
.... ..
..................................................................2
Care & Cleaning ..
.....
....
..
....
three years and sling fabric for two years.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
It will take two people about 20 minutes to complete the assembly process.
AA BB CC DD
EE
Part Description Quantity
AA Bolt (M6x25) 12
BB Bolt (M6x30, 6.2x10x11) 6
CC 4
DD 1
Bolt (M6x50, 6.2x10x33)
Hex wrench (4x98)
Hex wrench (5x58)
EE 1

4
Pre-Assembly(continued)
PACKAGE CONTENTS
Part Description Quantity
A
Back panel
1
B
Left armrest
1
C
2
D
Cross bar
E
1
F
Seat panel
1Right armrest
Cross bar
1
A B
C D
EF

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1 Attaching cross bars and the back panel to armrests
□
Attach one cross bar (E) to the front leg of armrest (B) with bolts (BB).
BB
BB
BB
BB
CC
CC
□
Attach the other cross bar (E) to the rear leg of armrest (B) with bolts (CC).
□
Insert the right side peg of the back panel (C) into the armrest (B).
Follow the above procedure to attach the left side armrest (A).
Fig. 1
□
Attach the cross bar (F) to the side tube of armrest (B) with bolt (BB).□
E
EF
A
C
B
IMPORTANT:
Do not fully tighten bolts (BB) or (CC) until the end of step 2.