HAMPTON BAY L-GZ767PST-A User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Hampton Bay!
Item #0000 000 000
Model #L-GZ767PST-A
USE AND CARE GUIDE
BAY WINDOWS PC HARDTOP GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
WWW.HOMEDEPOT.CA

2
Table of Contents
Table of Contents ..........................................................2
Safety Information
.........................................................2
Warranty
....................................................................2
What is Covered
.........................................................2
What is Not Covered ..................................................2
Pre-Assembly.............................................................3-4
Planning Assembly .................................................... 3
Hardware Included................................................... 3
Package Contents................................................... 4-6
Assembly ................................................................. 7-12
Care and Cleaning ...................................................... 13
Safety Information
1. More than six people are required for this assembly
2. Some parts may contain sharp edges. Wear
protective gloves.
3. When assembling and using this product, basic
safety precautions should always be followed to
reduce the risk of personal injury and damage to
equipment. Please read all instructions before
assembly and usage.
DANGER: This unit is heavy! Do not assemble this
item alone.
WARNING: Do not leave the gazebo where there is
a risk of high wind, as possible damage will occur to
the structure.
CAUTION: Do not climb on top of the gazebo.
Falling off the gazebo can result in serious injury,
possibly even death.
NOTICE: For outdoor use only.
Warranty
2 YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your
item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to
be free from defects in material or workmanship for a period of 2 years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling
or disassembling the product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.ca.

3 WWW.HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC W
DD EE FF
Part Description Quantity
AA M6X25 Bolt 16
BB M6 Flat washer 120
CC M6 X15 Bolt 36
DD M6X20 Bolt 52
EE M6X15 Screw 16
FF Dia. 6 X 180 Stake 12
W Wrench 1

4
Pre-Assembly (continued)
PACKAGE CONTENTS
A
B1
B2
C1
C2
C3
D1
D2
E1
E2
O
P1
P2
Q2
Q1
R
S1
S2
T1
T2
T3
F1
F2
F3
G
H
T4
U1

5 WWW.HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
Pre-Assembly (continued)
I
J
K
L1
L2
M1
M2
N1
N2
U2
U3
U4
V1
V2
W
X1
X2

6
Pre-Assembly (continued)
Part Description Quantity
A Screen 4
B1 Long screen 2
B2 Short screen 2
C1 Connector 4
C2 Lower connector 1 4
C3 Lower connector 2 4
D1 Short netting tube 2
D2 Long netting tube 4
E1 Short beam 2
E2 Long beam 2
F1 Slide beam 1 4
F2 Slide beam 2 4
F3 Middle beam 4
G Small beam 4
H Connecting pad 1
I Hook 1
J Small top cover 1
K Decorating Part 1
L1 Long “F” shape 2
L2 Short “F” shape 2
M1 Long left slot 2
M2 Long right slot 2
N1 Short left slot 2
N2 Short right slot 2
Part Description Quantity
O Slide beam slot 4
P1 Long left “F” part 2
P2 Long right “F” part 2
Q1 Short left “F” part 2
Q2 Short right “F” part 2
R Slide beam “F” part 4
S1 Slide lower blocker 12
S2 Middle lower blocker 4
T1 Long PC 1 2
T2 Long PC 2 2
T3 Long PC 3 2
T4 Long PC 4 2
U1 Short PC 1 2
U2 Short PC 2 2
U3 Short PC 3 2
U4 Short PC 4 2
V1 PC 1 4
V2 PC 2 4
W Mosquito netting 1
X1 Small PC 1 2
X2 Small PC 2 2

7 WWW.HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
Assembly
1Unfolding the screen 2Attaching the screens
ƑUnfold the screen (A).
NOTE: To avoid destroying the finish, please handle
it with care.
ƶUse bolts (AA) and flat washers (BB) to assemble the long
screens (B1) to the screens (A). Repeat this step to attach
the short screen (B2).

3Connecting the long screens
and short screens 4Attaching the lower connectors
ƶUse bolts (CC) and flat washers (BB) to attach the
connectors (C1) to the long screens (B1) and short screens
(B2).
NOTE: To avoid destroying the finish, please handle
it with care.
ƑUse bolts (CC) and flat washers (BB) to attach the lower
connectors (C2) and lower connectors (C3) to the
screens (A).

8
Assembly (continued)
5Attaching the long netting
tubes 6Attaching the short netting tubes
ƶUse bolts (CC) and flat washers (BB) to attach the long
netting tubes (D2) to the screens (A) and long screens (B1).
ƶUse bolts (CC) and flat washers (BB) to attach the short
netting tubes (D1) to the screens (A).
7Attaching the beams 8Attaching the slide beams
ƑInsert the long beams (E2) into the short beams (E1)
and secure them by using screws (CC) and flat washers
(BB).
NOTE: To avoid destroying the finish, please handle
it with care.
ƶ Use screws (DD) and flat washers (BB) to attach the slide
beams (F1) and slide beams (F2) to the short beams (E1).

9 WWW.HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
9Connect the slide beams to the
lower connectors 10 Attaching the middle beams
ƶ Use screws (DD) and flat washers (BB) to attach the slide
beams (F1) and slide beams (F2) to the lower connectors
(C2 and C3).
ƶ Use screws (DD) and flat washers (BB) to attach the middle
beams (F3) to the long beams (E2).
1
1
Attaching the middle beams to
the connectors 12 Attaching the small beams to the short beams
ƑUse screws (DD) and flat washers (BB) to attach the
middle beams (F3) to the connectors (C1).
NOTE: To avoid destroying the finish, please handle
it with care.
ƑUse the screws (DD) and flat washers (BB) to attach the
small beams (G) to the short beams (E1).

10
Assembly (continued)
13 Attaching the small beams to
the connecting pads 14 Attaching the small PCs
ƑUse screws (DD) and flat washers (BB) to attach the
small beams (G) to the connecting pad (H).
NOTE: To avoid destroying the finish, please handle
it with care.
ƑInsert the small PC 2s (X2) and small PC 1s (X1) into
the slots of the small beams (G).


15 Attaching the “F” shapes 16 Attaching the decorating part
ƶInsert the long “F” shapes (L1) and short “F” shapes (L2)
into the small PCs (X1 & X2) and small beams (G). Then
use screws (EE) and flat washers (BB) to secure the slide
lower blocker (S1) to the small beam.
NOTE: To avoid destroying the finish, please handle it
with care.
ƑAttach the small top cover (J) to the small top and
assemble the decorating part (I).

11 WWW.HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
17 Attaching the long PCs 1
8Assembling the long “F” part
ƶInsert the long PC 1s (T1) into the slots of slide beam 2s
(F2) and middle beams (F3). Insert the long left slot into the
slide beam (F2) and middle beam (F3). Insert the long PC
3s (T3) into slide beam 2s (F2) and middle beams (F3).


ƶ Insert the long left “F” parts (P1) and slide beam “F” parts
(R) into the PCs and slide beams (F2), and secure the
slide lower blockers (S1) to the slide beams by using
screws (EE) and flat washers (BB).

19 Attaching the middle lower
blockers 20 Attaching the mosquito netting
ƶ Insert the long left “F” parts (P1) and long right “F” parts (P2)
into the PC and middle beams (F3), and secure middle lower
blockers (S2) to the slide beams by using screws (EE) and
flat washers (BB).
NOTE: To avoid destroying the finish, please handle
it with care.
ƶUse the rings (FF) to attach the mosquito netting to the netting
tubes (D1 & D2).

12
Assembly (continued)
21 Securing the gazebo to the
ground
ƑUse the stakes (GG) to secure the gazebo to the
ground.


13 WWW.HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
Care and Cleaning
ƑBefore using, clean the gazebo completely with a soft dry towel.
ƑDo not put your gazebo in wet conditions where there is a risk of rust developing.
ƑWhen not in use, store in a cool, dry area.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
WWW.HOMEDEPOT.CA
Retain this manual for future use.

MERCI
Nous apprécions la confiance que vous accordez à Hampton Bay avec l'achat de ce kiosque. Nous nous efforçons de créer
continuellement des produits de qualité conçus pour améliorer votre maison. Nous vous invitons à nous visiter en ligne pour voir
notre gamme complète de produits disponibles pour vos projets d'amélioration résidentielle. Nous vous remercions d'avoir choisi
Hampton Bay!
Nº d’article#1000 812 318
Nº de modèle#L-GZ767PST-A
MANUEL D'UTILISATION ET D'ENTRETIEN
KIOSQUE PC À TOIT RIGIDE AVEC BAIE VITRÉE
Questions, problèmes, pièces manquantes? Avant de rendre au magasin,
appelez le Service au Client de Hampton Bay
de 8h à 18h, de l’est, Lundi au Vendredi
1-877-527-0313
WWW.HOMEDEPOT.CA

2
Table des matières
Table des matières........................................................2
Consignes de sécurité..................................................2
Garantie.....................................................................2
Ce qui est couvert ......................................................2
Ce qui n'est pas couvert.............................................2
Pré-assemblage ......................................................... 3-4
Planification d'assemblageng Assembly.................... 3
Matériel inclus .......................................................... 3
Contenu de l'emballage .......................................... 4-6
Assemblage............................................................. 7-12
Entretien et nettoyage ................................................ 13
Consignes de sécurité
1. Plus de six personnes sont nécessaires pour cette
assemblée
2. Certaines pièces peuvent comporter des bords
tranchants. Porter des gants de protection.
3. Lors de l'assemblage et l'utilisation de ce produit, les
précautions de sécurité de base doivent toujours
être respectées pour réduire le risque de blessures
et de dommages matériels. Veuillez lire toutes les
instructions avant l'assemblage et l'utilisation.
DANGER : Cette unité est lourde ! Ne pas
assembler ce produit seul.
AVERTISSEMENT : Ne pas laisser le kiosque où il
existe un risque de vent fort, car la structure pourrait
être endommagée
ATTENTION : Ne pas monter sur le toit du kiosque.
Tomber du kiosque peut entraîner des blessures
graves, voire la mort.
AVIS: Pour usage extérieur seulement.
Garantie
GARANTIE DE 2 ANS
CE QUI EST COUVERT
Cette garantie limitée est offerte à l'acheteur original et couvre les défauts de matériaux et de fabrication de votre article à
condition que l'article est entretenu et utilisé uniquement à des fins résidentielles et personnelles. Cet article est garanti
exempt de défauts de matériaux ou de fabrication pendant une période de 2 ans.
CE QUI N'EST PAS COUVERT
Nous ne remboursons pas les frais de transport ou de livraison, ni récompensons l'individu ou tout tiers pour l'assemblage
ou le désassemblage du produit.
Nous vous invitons à contacter l'équipe du service à la clientèle au 1-877-527-0313 ou à visiter www. www.homedepot.ca.

3 WWW.HOMEDEPOT.CA
Veuillez contacter le 1-877-527-0313 pour de l’aide additionnelle.
Pré-assemblage
PLANIFICATION D'ASSEMBLAGE
Avant de commencer l'assemblage de ce produit, s'assurer que toutes les pièces sont présentes. Comparer les pièces
avec le matériel inclus et les listes du contenu de l'emballage. Si une pièce est manquante ou endommagée, ne pas
tenter d'assembler le produit. Nous vous invitons à contacter le service à la clientèle pour les pièces de rechange.
MATÉRIEL INCLUS
REMARQUE : Le matériel illustré n'est pas à
l'échelle réelle
AA BB CC W
DD EE FF
Partie Description Quantité
AA M6X25 Boulon 16
BB M6 Rondelle plate 120
CC M6 X15 Boulon 36
DD M6X20 Boulon 52
EE M6X15 Vis 16
FF Dia. 6 X 180 Ridelle 12
WClé 1

4
Pré-assemblage (suite)
CONTENU DE L'EMBALLAGE
A
B1
B2
C1
C2
C3
D1
D2
E1
E2
O
P1
P2
Q2
Q1
R
S1
S2
T1
T2
T3
F1
F2
F3
G
H
T4
U1

5 WWW.HOMEDEPOT.CA
Veuillez contacter le 1-877-527-0313 pour de l’aide additionnelle.
Pré-assemblage (suite)
I
J
K
L1
L2
M1
M2
N1
N2
U2
U3
U4
V1
V2
W
X1
X2

6
Pré-assemblage (suite)
Partie Description Quantité
A Écran 4
B1 Écran long 2
B2 Écran court 2
C1 Connecteur 4
C2 Connecteur inférieur
1
4
C3 Connecteur inférieur
2
4
D1 Tube à filet court 2
D2 Tube à filet long 4
E1 Poutre courte 2
E2 Poutre longue 2
F1 Poutre coulissante 1 4
F2 Poutre coulissante 2 4
F3 Poutre intermédiaire 4
G Petite poutre 4
H Plot de connexion 1
I Crochet 1
JPetite couverture
éi
1
K Partie décorative 1
L1 Forme longue de « F 2
L2 Forme courte de « F 2
M1 Fente longue gauche 2
M2 Fente longue droite 2
N1 Fente courte gauche 2
N2 Fente courte droit 2
Partie Description Quantité
O Fente de la poutre 4
P1 Partie longue gauche F 2
P2 Partie longue droite F 2
Q1 Partie courte gauche F 2
Q2 Partie courte droite F 2
RPoutre coulissante partie
F
4
S1 Bloqueur inférieur
coulissant
12
S2 Bloqueur inférieur
coulissant
4
T1 PCE longue 1 2
T2 PCE longue 2 2
T3 PCE longue 3 2
T4 PCE longue 4 2
U1 PCE courte 1 2
U2 PCE courte 2 2
U3 PCE courte 3 2
U4 PCE courte 4 2
V1 PCE 1 4
V2 PCE 2 4
W Toile moustiquaire 1
X1 Petite PCE 1 2
X2 Petite PCE 2 2