HAMPTON BAY GCS00225B User manual

Item # 1001 868 875
Model # GCS00225B
USE AND CARE GUIDE
PLAISTOW 3 PERSON WICKER SWING WITH CANOPY
THANK YOU
y through the purchase of this swing. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m.,EST, Monday - Friday, 9 a.m. - 6p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Care and Cleaning.......................................................11
Assembly ........................................................................5
Package Contents .................................................................... 4
2
Table of Contents
Warranty ........................................................................2
What is Covered ...................................................................... 2
What is Not Covered ................................................................ 2
Warranty
1 YEAR FRAME AND 1 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
Contact the Customer Service Tea
Safety Information
PRODUCT CAUTION
SAFETY WARNINGS
Safety Information .......................................................2
Product Caution .................................................................... 2
Safety Warnings ..................................................................... 2
Table of Contents ........................................................2
This swing was made for the explicitpurpose of providing outdoor functions and is not to be used as a toy. Thisproduct is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this swing when any formidable / severe weather is
approaching. Do not locate the product near open flame. Do not use the product as a support. Do not shake, lean, or climb on the product.
Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
m at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
WARNING: Weight limit for the swing chair is 250 lbs
(113.39 kg) for each seat.
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: Do not locate the product near any
heat source.
!
WARNING: Thisswing unit isheavy, and mayrequire
two adults for safe assembly.
WARNING: Do not shake from side to side when using
the product.
CAUTION: Never use this product as a support. Do not
!
shake, lean or climb on the swing at any time.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasivesurface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA
BB
M8x100 combination bolt, washer and nut
Description
Quantity Part
M8x50 combination bolt, washer and nut
CC M8x45 combination bolt, washer and nut
4+1
2+1
4+1
4+1
4+1
DD M6x20 combination bolt
EE
FF
M6x45 combination bolt
M6x40 combination bolt
GG M6x30 bolt
12+1
6+1
HH M6x20 combination bolt 2+1
2
2
2
1
1
II
JJ
Hook
Knob
KK Supportbar
LL Hex wrench
MM Wrench
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
BB DD EE
GG HH II JJ
KK LL MM
AA CC
FF

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A
B
Top bar
Description QuantityPart
Leg
C Side bar
1
4
2
1
1
D Seat
E
F
Back
Left arm
G Rightarm
1
1
1
H Curved bar
2
3
3
2
I
J
Support bar
Short swing pipe
K Long swing pipe
2
L
M
Canopy
Seat cushion
M
L
K
J
I
H
G
F
E
DC
B
A

1
l
5
Assembly
Attach two sets of the legs (B) to the top bar (A) using M8x100 combination bolts, washers and nuts (AA).
Attach the support bars (KK) to the legs (B) and the top bar (A) using M8x45 combination bolts, washers and nuts (CC) and
M8x50 combination bolts, washers and nuts (BB).
ASSEMBLING THE SWING FRAME
Attach the two side bars (C) to the legs (B) using M6x40 combination bolts (FF).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Once all of the bolts are in place, fully tighten the bolts.
KK
CC
A
AA
BB
B
FF
C
AA
KK
BB
B
B
CC
CC
CC
FF
FF
A
C

2
l
6
Assembly (continued)
Attach the left and the right arm (F&G) to the back (E) using M6x40 combination bolts (FF).
Attach the seat (D) to the arms (F&G) using M6x20 combination bolts (HH).
ATTACHING THE ARMS ANDTHE SEAT TO THE BACK
Connect the seat (D) to the back (E) using M6x45 combination bolts (EE).
Once all of the bolts are in place, fully tighten all of the bolts.
D
EE
HH
G
F
THE BACK
E
EE
E
E
E
G
F
F
F
D
D

3
7
Assembly (continued)
Attach the short and the long swing pipes (J&K) to the left and the right arms (F&G) using M8x20 combination bolts (DD).
ATTACHING THE SWING PIPES TO THE ARMS
Connect the top of the two swing pipes (J&K) together using the hooks (II).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Once all of the bolts are in place, fully tighten the bolts.
II
DD
J
K
F
G
K
J

4
8
Assembly (continued)
Attach the assembled seat to the swing frame using the hooks (II).
ATTACHING THE SEAT TO THE SWING FRAME
II

5
9
Assembly(continued)
Attach the two curved bars (H) to the support bars (I) using M6x30 bolts (GG).
Fully tighten all of the bolts on the top frame using the hex wrench (LL) before placing the canopy (L).
ASSEMBLING THE TOP FRAME
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Place the canopy (L) on the assembled top frame and tie the canopy (L) to the curved bars (H) by affixing the Velcro.
NOTE: Pay attention on the direction of the curved bars (H).
L
I
H
GG
GG
L
Velcro
H

6
10
Assembly (continued)
Attach the assembled top frame to the top bar (A) using the knobs (JJ) on both sides.
ATTACHING THE TOP FRAME TO THE TOP BAR
Place the seat cushions (M) on the seat (D).
Adjust the angle of the top frame and fully tighten the knobs (JJ) in the clockwise direction.
M
JJ
D