HAMPTON BAY WEST PARK LOVESEAT 501.0602.000 User manual

USE AND CARE GUIDE
WEST PARK LOVESEAT
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday,
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 1003 533 463
1003 459 866
Model # 501.0602.000
THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
lly create

Table of Contents
Table of Contents ...................................2
Important Safety Instructions .........................2
Warranty ..........................................2
What is covered ...................................2
What is not covered ................................2
Pre-Assembly ......................................3
Planning Assembly.................................3
Hardware Included.................................3
Chair Package Contents.............................4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning ..................................6
2
Warranty
2 YEAR WARRANTY
WHAT IS COVERED
We warrant the product to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, freezing, or abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Important Safety Instructions
CAUTION: Read all of the instructions in this manual
before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.

3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface
to avoid scratching.
NOTE: More than one person may be required to assemble
this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA M6x25 Bolt
M6x40 Bolt
2
BB 6
CC
DD
Washer
8
8
Bolt cap
EE 1
Hex Wrench
DDCCBB EE
AA

4
Pre-Assembly
LOVESEAT PACKAGE CONTENTS
IMPORTANT: Do not fully tighten bolts/screws until all pieces are loosely assembled.
Part Description Quantity
A Right arm 1
B Left arm 1
C Seat 1
D Backrest 1
E Seat cushion 1
F Back cushion 2
B
C
D
A
E
F
F

5
Assembly
3
□
4
□
C
C
A
A
E
D
D
CC
BB
DD
CC
BB
DD
CC
AA
DD
F
F
CC
BB
DD
CC
AA DD
1 Attaching the loveseat seat to the right
arm
Attach the loveseat seat (C) to the right arm (A) using M6 bolts
(BB) and washers (CC).
2
(AA and BB) and washers (CC).
Attaching the loveseat back to the right arm
Attach the loveseat back (D) to the right arm (A) using M6 bolts
Attaching the left arm to the loveseat
seat and back
Attach the left arm (B) to the seat (C) using M6 bolts (BB) and
washers (CC), to the loveseat back (D) using M6 bolts
(AA) and washers (CC).
Adding the cushions
Add the seat cushion (E) and back cushion (F) on the chair.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
.
is
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
.
is