HAMPTON BAY GFS00679B User manual

Item #000 000
Model #GFS00679B
USE AND CARE GUIDE
10x10x10 SOLAR LED LIGHTED GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

Table of Contents
Warranty
Table of Contents ..................................................2
Warranty ................................................................2
What is Covered ..............................................................2
What is Not Covered .......................................................2
Pre-Assembly ........................................................3
Hardware Included ..............................................................3
Package Contents ................................................................4
Assembly ..................................................................5
Care and Cleaning ..................................................18
1 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and package charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make the substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
2
Warrant
y
Safety Information .................................................2
Safety Information
WARNING: Keep all ame and heat sources away
from this gazebo fabric.
WARNING: The application of any foreign substance to
the gazebo fabric may render the ame-resistant
properties ineffective.
WARNING: This gazebo is made with fabric that meets
CPAI - 84 specications for ame resistance. It is not
re proof. The fabic will burn if left in continuous
contact with any ame source.
CAUTION: Children under the age of 10 who are near
the gazebo should be supervised by a competent
adult at all times.
CAUTION: This gazebo is made for the explicit purpose of
providing limited outdoor sunshade and is not to be used
as a toy, shelter, or tent.
C
AUTI
O
N:
T
h
i
s gazebo
i
s made
f
or the expl
i
c
i
t purpose o
f
prov
i
d
i
ng l
i
m
i
ted outdoor sunshade and
i
s not to be used
as a toy, s
h
e
l
ter, or tent
.
CAUTION: Do not locate the gazebo near any open
ame.
CAUTION: Do not use the gazebo as a support.
CAUTION: Do not shake, lean, or climb on the gazebo.
!
!
Planning Assembly ..............................................................3

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC
Part Description Quantity
AA
BB
CC
Screw
Ground spike
Screw driver
1 + 1
12 + 1
1

Pre-Assembly (continued)
PACKAGE CONTENTS
4
Part Description Quantity
A
B
C
D
Pillar
Beam
Top tube
Top tube with wire
6
6
4
1
E
F
G
H
Top tube with switch
Slip fabric tube
Top tube hub
Solar energy receiver
1
6
1
1
I
J
K
Corner connector
Connecting wire
Pillar base plate
6
8
6
L
M
N
O
Knob
Center hook
Large fabric cover
Small fabric cover
12
1
1
1
PSide wall fabric 6
Part Description Quantity
D
A
K
E
G
C
I
L
H
M
J
O
N
P
F
B

Assembly
5
Attaching the corner connectors and the pillar base plates to the pillars
Lay the pillars (A) down on a soft surface.
Attach the corner connector (I) to the pillar (A) as shown below.
Attach the pillar base plate (K) the pillar (A) as shown below.
Repeat this step for the remaining pillars (A).
1
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
K
I
I
A
A
A
K

Assembly (continued)
6
Connecting the beams to the pillars
Attach the beam (B) in between two of the pillars (A) by inserting the knobs (L) and rotating clockwise as shown below.
Repeat this step for the remaining pillars (A).
2
B
B
NOTE: More than one person is required to
assemble this step.
A
A
AA
B
LL

Assembly (continued)
7
Attaching the assembled pillars
Attach the beam (B) in between the assembled pillars (A) by inserting the knobs (L) and rotating clockwise as shown below.
Repeat this step for the remaining beams (B).
3
NOTE: More than one person is required to
assemble this step.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
B
A
L
A
B
B
L
A
A
A
A
B
B
B
L
L
A
A
A
B
B
B
L
L

Assembly (continued)
8
Attaching the center hook to the top tube hub
4
Attach the center hook (M) to the top tube hub (G) using the screw (AA).
Fully tighten the screw using the screw driver (CC).
G
M
AA

Assembly (continued)
9
Attaching the top tube with wire and the top tube with switch to the top tube hub
Connect the adapters in the top tube with wire (D) and the top tube with switch (E) to the adapters in the top tube hub (G).
Attach the top tube with wire (D) and the top tube with switch (E) to the top tube hub (G).
5
D
G
G
E
G
E
E
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.

Assembly (continued)
10
Attaching the top tube with wire and the top tube with switch to the corner connectors
Attach the top tube with wire (D) and the top tube with switch (E) to the corner connectors (I) as shown below.
6
NOTE: More than one person is required to
assemble this step and suggest using a stepladder.
I
I
I
D&E
E
D

Assembly (continued)
11
Attaching the top tubes to the top tube hub and the corner connectors
Attach one end of the top tubes (C) to the top tube hub (G) as shown below.
Attach the other end of the top tubes (C) to the corner connectors (I) as shown below.
7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
I
G
C
G
D
NOTE: More than one person is required to assemble
this step and suggest using a stepladder.
C
C

Assembly (continued)
12
Attaching the large fabric cover
Place the large fabric cover (N) onto the assembled frame.
8
N

Assembly (continued)
13
Attaching the solar energy receiver and the small fabric cover
Make sure the solar energy receiver (H) goes through the small fabric cover (O).
Connect the adapter on the solar energy receiver (H) to the adapter on the top tube hub (G).
Attach the solar energy receiver (H) to the top tube hub (G) by turning clockwise.
Attach each corner of the small fabric cover (O) by fully extending the fabric to the assembled top tubes (C), (D), and (E).
9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
O
H
O
C&D&E
O
H
G
O

Assembly (continued)
14
Attaching the large fabric cover
Attach the connecting wires (J) to the plugs on the beams (B) as shown below.
Attach the connecting wires (J) to the adapters on the top tube with wire (D) and to the top tube with switch (E) as shown below.
10
B
D&E
B
B
J
C
B
J

Assembly (continued)
15
Tying the large fabric cover to the beams
Tie the large fabric cover (N) to the beams (B).
11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
B
N
NOTE: Do not fully extend the large fabric cover (N)
over the beams (B).
N

Assembly (continued)
16
Attaching the slip fabric tube to the corner connector
Attach the slip fabric tubes (F) to the corner connectors (I) as shown below.
Repeat this step for the other slip fabric tubes (F).
12
F
B
B
A
IF
N

Assembly (continued)
17
Tying the side wall fabric to the slip fabric tube
Tie the side wall fabric (P) to the slip fabric tubes (F).
Fully extend the large fabric cover (N) over the beams (B).
13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
P
P
F
N

Assembly (continued)
18
Securing the pillar base plates to the ground
14
Secure the pillar base plates (K) to the ground by using the ground spikes (BB).
Make sure the pillar base plates (K) are totally grounded.
Care and Cleaning
For the best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing
dirt particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Keep the gazebo away from re, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Store the gazebo in a dry, sheltered place when not in use.
K
BB
A

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 6 p.m., EST Monday - Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.