HAMPTON BAY HARBOR GFS01250A User manual

Model # GFS01250A
USE AND CARE GUIDE
HARBOR GAZEBO
1-855-HD-HAMPTON
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
Item # 1000 131 505
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

Table of Contents
Warranty
Table of Contents ..................................................2
Warranty ................................................................2
What is Covered ..............................................................2
What is Not Covered .......................................................2
Pre-Assembly ............................................................3
Planning Assembly ..............................................................3
Hardware Included ...............................................................3
Package Contents ................................................................4
Assembly ..................................................................5
Care and Cleaning ..................................................13
2 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and package charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make the substitutions with similar merchandise, if the model in question is no longer in production.
2
Warrant
y
Safety Information .................................................2
Safety Information
CAUTION: Children under the age of 10 who are near
the gazebo should be supervised by a competent
adult at all times.
CAUTION: This gazebo is made for the explicit purpose of
providing limited outdoor sunshade and is not to be used
as a toy, shelter, or tent.
CAUTION: Do not locate the gazebo near any open
CAUTION: Do not use the gazebo as a support.
CAUTION: Do not shake, lean, or climb on the gazebo.
!
WARNING:
gazebo fabric.
!
WARNING: This application of any foreign substance to the
ineffective.
!
WARNING: This gazebo is made with fabric that meets
proof. The fabric will burn if left continuous contact with any

Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
Part Description Quantity
3
NOTE: Hardware not shown to actual size.
AA BB CC FF
AA
BB
CC
DD
EE
FF
32+1
40+1
4+1
8+1
2
1
DD EE
M6x25 combination bolt
M6x15 combination bolt
M6x28 combination bolt,nut and cap
Wrench
Ground spike
Hex wrench
GG Corkscrew ground spike 8+1
GG

Pre-Assembly (continued)
PACKAGE CONTENTS
4
Part Description Quantity
A
B
C
D
Pillar A
Pillar B
Pillar C
Panel
4
4
4
8
E
F
G
H
Beam E
Top tube F
Top tube G
Short canopy spoke
4
4
4
4
I
J
K
L
Upper canopy spoke
Upper canopy hub J
Lower canopy hub K
Foot edge
4
1
1
4
M
N
O
P
Beam M
Small fabric cover
Large fabric cover
Side wall
4
1
1
2
Q
R
Netting
Plastic ring
4
40
SDecorative ball 8
Part Description Quantity
J
I
I
I
G
FHHG
F
H
K
H
GG
FF
M
E
M
EE
M
E
M
AA
A
A
D
D
D
D
D
D
D
L
L
L
L
B
C
CB
B
C
C
DB
S
S
S
S
S
S
S
S
R
O
N
P
Q

Assembly
5
Assembling the corner pillars
Screw the decorative balls (S) onto the top of the pillars (B and C).
Line up the bolt holes on the pillar (A, B, and C) with corresponding bolt holes on the panels (D).
Attach the panels (D) to the pillars (A, B, and C) using M6x25 combination bolts (AA).
Attach the foot edge (L) to pillars (A, B, and C) using M6x15 combination bolts (BB).
Repeat step 1 for the remaining sets of pillars (A, B, and C), panels (D), and foot edges (L).
1
NOTE: Loosely tighten all bolts using the Hex wrench (EE).
D
AA S
A
D
S
B
C
L
BB

Assembly (continued)
6
Attaching the beams
Insert beam (E) into beam (M) and line up the bolt holes.
Secure beam (E) to beam (M) using M6x15 combination bolts (BB).
Repeat step 2 for the remaining sets of beams (E and M).
2
NOTE: Loosely tighten all bolts using the Hex wrench (EE).

Assembly (continued)
7
Attaching the beams to the pillars
Line up the bolt holes on the ends of the connected beams (E and M) with the corresponding bolt holes on the pillars (A).
Attach the connected beams (E and M) using M6x15 combination bolts (BB).
3
NOTE: Make sure that the round tubes on the beams
are facing inward.
NOTE: Loosely tighten all bolts using the
Hex wrench (EE).
E
M
EME
M
E
M
BB BB
BB
BB

Assembly (continued)
8
Assembling the upper canopy frame
Insert the top tubes (F) into the top tubes (G) making four long canopy spokes.
Insert the four top tubes (G), of the long canopy spokes, into the four long tubes of the canopy hub (K).
Insert the short canopy spokes (H) into the four short tubes of the lower canopy hub (K).
Attach the four top tubes (F), of the long canopy spokes, to the pillars (A) using M6x28 combination bolts,nuts and caps(CC)
the bolt should be inserted from the right side to the left side of the tube (F).
Attach the four short canopy spokes (H) to beams (E and M) using M6x15 combination bolts (BB).
4
F
F
H
F
H
H
F
H
CC
BB
H
H
H
H
G
G
G
G
K
GG
G
G
NOTE: Tighten all bolts using the Hex wrench (EE) and
Wrench (FF)

Assembly (continued)
9
Placing the large fabric cover
5
Place the large fabric cover (O) on top of the assembled frame.
Fully extend the large fabric cover (O) to the end of the spokes.

Assembly (continued)
10
Assembling the upper canopy frame
Insert the upper canopy spokes (I) into the upper canopy hub (J).
Then insert the upper canopy spokes (I) into each of thetop tubes (G).
6
I
JI
I
I
I
I
I
I
J

Assembly (continued)
11
Securing the canopy top and attaching the side walls
Put up the two side walls (P) on the beams (E and M)
7
NOTE: The harbor gazebo package includes two privacy side
walls designed to cover two corners of the gazebo.
Place the small fabric cover (N) on the upper canopy spokes (I) and fully extend the small fabric cover to the ends of the uppercanopy
spokes (I).

Assembly (continued)
12
Hanging the netting
8
Put up the netting (Q) onto the beams (E and M) with the plastic rings (R).
R
E&M
R
Q
Q
Q
Q
Q

Assembly (continued)
13
Stabilizing the gazebo
9
Care and Cleaning
For the best results, clean the frame with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles
that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the gazebo in a dry, sheltered place when not in use.
Insert the corkscrew ground spikes (GG) through the hole on the foot edge (L) of the connected pillars (A, B, and C).
Twist the corkscrew ground spikes down into the ground until the foot edge (L) is secure.
Pound the ground spikes (DD) through the other hole of foot edge (L) of the connected pillars (A, B, and C) until the ground spik
e
s (DD)
secures the foot edge (L) to the ground.
Repeat this step for the other three pillars (A, B, and C).
NOTE: You may opt to insert a ground spike (DD) through the
loop in the corkscrew ground spike (GG) to assist in twisting
the corkscrew ground spike (GG) into the ground.
DD
GG
GG
GG
DD
GG DD
DD

Retain this manual for future use.
1-855-HD-HAMPTON
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday