Hanna Instruments HI96000 Series User manual

HI96000 Series
Portable
Photometers
• CAL Check
·Allows for performance verification
and calibration of the meter using NIST
traceable standards.
• GLP
·Review of the last calibration date.
• Auto-shut off
·Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents wastage
of batteries in the event the meter is
accidentally left on.
• Battery status indicator
·Indicates the amount of battery
life left.
• Built-in timer
·Display of time remaining before a
measurement is taken. Ensures that
all readings are taken at the appropriate
reaction intervals for the test being
performed.
• Error messages
·Messages on display alerting to
problems including no cap, high zero,
and standard too low.
• Cooling lamp indicator
·To maintain the desirable wavelength
to be used for absorbance, it is necessary
to ensure components are not overheated
from the heat generated by the tungsten
lamp. Each photometer is designed to
allow a minimal amount of time for
components to cool. The cooling lamp
indicator is displayed prior to a reading
being taken.
• Units of measure
·Appropriate unit of measure is
displayed along with reading.
Hanna's portable photometers feature an
advanced optical system; the combination
of a special tungsten lamp, a narrow band
interference lter, and silicon photodetector
ensure accurate photometric readings
every time. The Hanna exclusive CAL
Check™ feature utilizes ready-made, NIST
traceable standards to verify both meter
validation and calibration. The exclusive
cuvette locking system ensures that the
cuvette is inserted into the measurement
cell in the same position every time to
maintain a consistent path length.
CAL Check™ Validation*
Two-step validation procedure for proper calibration.
Zero the meter prior to validation...
Place the CAL Check™ Standard A into the cuvette holder and press ZERO/CFM button.
The lamp, cuvette and detector icons will appear on the display followed by “-0.0-”.
The meter is now zeroed and ready for validation.
... and compare accuracy against a known standard.
Place the CAL Check™ standard B into the cuvette holder and press CAL Check™. The
lamp, cuvette and detector icons together with “CAL Check” will appear on the display.
At the end of the measurement the display will show the validation standard value.
CAL Check™ Calibration*
Calibrate your instrument quickly and easily.
Zero the meter prior to calibration...
Press and hold CAL Check™ for three seconds to enter calibration mode. Place the
CAL Check™ Standard A into the cuvette holder and press ZERO/CFM. The lamp, cuvette
and detector icons will appear on the display followed by “-0.0-”. The meter is now zeroed
and ready for calibration.
... and calibrate to a known standard.
Place the CAL Check™ Standard B into the cuvette holder. Press READ/TIMER and
the lamp, cuvette and detector icons will appear on the display. After measurement
the instrument will show the CAL Check™ Standard value.
*Each CAL Check™ cuvette is clearly labeled with its respective measurement. Please read the full instruction manual before validation/calibration.
Solutions and Accessories
HI93703-50 Cuvette cleaning solution, 230 mL HI731335 Cuvette caps (4)
HI731318 Cuvette cleaning cloth (4) HI740318 Carrying case for HI96 series
HI731331 Measuring cuvettes (4)
"C" versions include
CAL Check™ standards and
a rigid carrying case
|www.hannainst.com

CAL Check™ Standard Reagents
Instrument
CAL Check™
Standards Set Parameter
HI96700 HI96700-11 Ammonia
HI96701 HI96701-11 Free Chlorine
HI96702 HI96702-11 Copper
HI96704 HI96704-11 Hydrazine
HI96705 HI96705-11 Silica
HI96706 HI96706-11 Phosphorus
HI96707 HI96707-11 Nitrite
HI96708 HI96708-11 Nitrite
HI96709 HI96709-11 Manganese
HI96712 HI96712-11 Aluminum
HI96713 HI96713-11 Phosphate
HI96714 HI96714-11 Cyanide
HI96715 HI96715-11 Ammonia
HI96716 HI96716-11 Bromine
HI96717 HI96717-11 Phosphate
HI96718 HI96718-11 Iodine
HI96719 HI96719-11 Hardness, Magnesium
HI96720 HI96720-11 Hardness, Calcium
HI96721 HI96721-11 Iron
HI96722 HI96722-11 Cyanuric Acid
HI96723 HI96723-11 Chromium VI
HI96724 HI96724-11 Free/Total Chlorine
HI96726 HI96726-11 Nickel
HI96727 HI96727-11 Color of Water
HI96728 HI96728-11 Nitrate
HI96729 HI96729-11 Fluoride
HI96730 HI96730-11 Molybdenum
HI96731 HI96731-11 Zinc
HI96732 HI96732-11 Dissolved Oxygen
HI96733 HI96733-11 Ammonia
HI96737 HI96737-11 Silver
HI96738 HI96738-11 Chlorine Dioxide
HI96739 HI96739-11 Fluoride
HI96740 HI96740-11 Nickel
HI96746 HI96746-11 Iron
HI96747 HI96747-11 Copper
HI98748 HI96748-11 Manganese
HI96749 HI96749-11 Chromium VI
HI96750 HI96750-11 Potassium
HI96751 HI96751-11 Sulfate
HI96753 HI96753-11 Chloride
HI96761 HI96761-11 Total Chlorine
HI96762 HI96762-11 Trace Free Chlorine
HI 96769 HI96769-11 Anionic Detergents
HI96770 HI96770-11 Silica
HI96771 HI96771-11 Ultra High Range
Free Chlorine
HI96786 HI96786-11 Nitrate
Instrument
CAL Check™
Standards Set Parameter
HI96101
HI96716-11
HI96701-11
HI96711-11
HI96722-11
HI96718-11
HI96746-11
HI96710-11
Bromine
Free Chlorine
Total Chlorine
Cyanuric Acid
Iodine
Iron
pH
HI96104
HI96710-11
HI96701-11
HI96711-11
HI96722-11
pH
Free Chlorine
Total Chlorine
Cyanuric Acid
HI96710
HI96701-11
HI96711-11
HI96710-11
Free Chlorine
Total Chlorine
pH
HI96711 HI96701-11
HI96711-11
Free Chlorine
Total Chlorine
HI96725
HI96701-11
HI96711-11
HI96722-11
HI96710-11
Free Chlorine
Total Chlorine
Cyanuric Acid
pH
HI96734 HI96734-11 Free Chlorine
Total Chlorine
HI96735 HI96735-11 Hardness
HI96736 HI96719-11
HI96710-11
Total Hardness
pH
HI96741 HI96719-11
HI96746-11
Total Hardness
Iron
HI96742 HI96746-11
HI96748-11
Iron
Manganese
HI96743 HI96746-11
HI96710-11
Iron
pH
HI96744
HI96710-11
HI96719-11
HI96746-11
pH
Hardness, calcium
Hardness, Magnesium
Iron
HI96745
HI96701-11
HI96711-11
HI96719-11
HI96746-11
HI96710-11
Free Chlorine
Total Chlorine
Hardness, Magnesium
Iron
pH
HI96752 HI96752-11
HI96754-11
Calcium
Magnesium
Single Parameter Multiparameter
www.hannainst.com |