Hanna Instruments Foodcare HI 93501 User manual

HI93501, HI935001,
HI935004, HI935007,
HI935008, HI9350011,
HI9350041
Portable Thermometers
INSTRUCTION MANUAL

Thank you for choosing a Hanna Instruments product.
Please read this instruction manual carefully before
using this meter.
This manual will provide you with the necessary
information for correct use of this meter, as well as
a precise idea of its versatility.
If you need additional technical information, do not
hesitate to e‑mail us at [email protected] or view
our worldwide contact list at www.hannainst.com.
Dear
Customer,
All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner, Hanna
Instruments Inc., Woonsocket, Rhode Island, 02895, USA.

3
Table of Contents........................................................
Preliminary Examination .............................................
Intended Use .............................................................
General Description.....................................................
HI93501 Specifications ..............................................
HI935001 Specifications.............................................
HI935004 Specifications.............................................
HI935007 Specifications.............................................
HI935008 Specifications.............................................
HI9350011 Specifications...........................................
HI9350041 Specifications........................................
Operational Guide ......................................................
Meter Setup...............................................................
Battery Replacement...................................................
Temperature Probes ....................................................
Accessories.................................................................
Certification................................................................
TABLE OF CONTENTS
4
4
6
10
14
5
8
16
12
18
20
23
24
3
25
25
26

4
Remove the meter from the packing material and exam‑
ine it to make sure that no damage has occurred during
shipping. If there is any damage, contact your local Hanna
Instruments Office.
Each meter is supplied complete with:
• Temperature probe
• Alkaline batteries: 1.5V AAA (3 pcs.)
• Quick reference guide
• Instruction manual
Note: Save all packing material until you are sure that
the meter functions correctly. All defective items must
be returned in the original packing with the supplied
accessories.
PRELIMINARY EXAMINATION
The thermometers are waterproof and are rated
IP65. The meters are specifically designed for
measuring the temperature in all areas of the
food sector.
Both air temperature and product internal temperature can be
measured with these thermometers.
The probe shaft is designed for continuous contact with foodstuffs
in accordance with Regulation (EC) 1935/2004.
Refer to the probe section of this manual for more information
on the available probes.
INTENDED USE

5
The process variable temperature plays a central
function in food commerce. Many aspects of safe food handling
require the accurate measurement of temperature. Food
service, food preparation, packaging, storage and transport of food
require temperature to be monitored or controlled. Spot checking
temperatures with Hanna food thermometers ensures daily work
routines are carried out at the correct temperature.
Hanna Instruments manufactures food thermometer
models to meet the tough environment encountered in
the food sector. Standard features of all models include a
ruggedized professionally designed waterproof case and
stainless steel probe for measurements in semi solid foods,
liquids, pastes or air. They provide good accuracy and
include features such as CAL Check, low battery detection, auto‑off
capability, and long battery life.
The model HI93501 is a thermistor style thermometer. It
measures temperatures from ‑50.0 to 150.0 °C (‑58.0 to
302.0 °F). It comes with a stainless steel replaceable style
penetration probe (FC762PW).
The models HI935001 and HI935007 thermometers utilize a
K‑type thermocouple style probe and provide the large range
of temperature measurement; from ‑50.0 to 300 °C (‑58.0 to
572 °F). The model HI935001 uses a replaceable style probe
(FC766PW) and the model HI935007 has a fixed thermocouple
probe and is not replaceable.
The models HI935004 and HI935008 thermometers utilize a
T‑type thermocouple style probe and provide the large range
of temperature measurement; from ‑50.0 to 300 °C (‑58.0 to
572 °F). The model HI935004 uses a replaceable style probe
(FC767PW) and the model HI935008 has a fixed thermocouple
probe and is not replaceable.
Models HI93501,HI935004 and HI935008 are compliant to
standard EN 13485.
The model HI9350011 thermometer utilize a K‑type thermo‑
couple style probe and provide the large range of temperature
measurement; from ‑50.0 to 300 °C (‑58.0 to 572 °F).
HI9350011 uses a replaceable style probe (FC766C1).
The model HI9350041 thermometer utilize a T‑type
thermocouple style probe and provide the large range of
temperature measurement; from ‑50.0 to 300 °C (‑58.0
to 572 °F). The model HI9350041 uses a replaceable style
probe (FC767C1).
GENERAL DESCRIPTION

6
HI93501 SPECIFICATIONS
Main features:
• EN 13485 compliant
• FC762PW thermistor probe
• Calibration Check feature
• Remaining battery life indication/low battery detection
• Auto‑off capability
• Waterproof casing IP65
Interchangeable FC762 series
Thermistor probes
HI93501

7
Range* ‑50.0 to 150.0 °C
‑58.0 to 302.0 °F
Resolution 0.1 °C
0.1 °F
Meter Accuracy
@ 23.0 °C ±5 °C
±0.1 °C (‑50.0 to 150.0 °C)
±0.2 °F (‑58.0 to 302.0 °F)
Probe Accuracy
FC762PW
±0.3 °C (‑10.0 to 80.0 °C)
±0.5 °F (14 to 176 °F)
±0.7 °C / ±1.3 °F remaining range
Response time for
90% of final value 10 seconds
Battery type / life 1.5V AAA (3 pcs.)
approx. 4500 hours of continuous use
Auto‑Off user selectable: after 8 min, 60 min
or disabled
Environment
For air measurement: Type E
For product internal measurement:
Rated operating condition:
‑20 to 50 °C (‑4 to 122 °F)
Limiting condition:
‑30 to 50 °C (‑22 to 122 °F)
Storage and transportation condition:
‑40 to 70 °C (‑40 to 158 °F)
Relative Humidity 100 %
Storage/transport
temperature ‑40 to 70 °C (‑40 to 158 °F)
Dimensions 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)
Mass 175 g (6.17 oz.)
Certification
EN 13485:2001
Suitability: Storage and transport;
Climatic Environment: E;
Accuracy Class: 1;
HI93501 SPECIFICATIONS
*The measurement range may be limited by probe type, and
applies to the probe shaft.

8
HI935001 SPECIFICATIONS
Main features:
• FC766PW K‑type thermocouple probe
• Calibration Check feature
• Remaining battery life indication/low battery detection
• Auto‑off capability
• Waterproof casing IP65
Interchangeable
K‑type Thermocouple FC766
series probes
HI935001

9
Range* ‑50.0 to 199.9 °C ; 200 to 300 °C
‑58.0 to 399.9 °F ; 400 to 572 °F
Resolution
0.1 °C (‑50.0 to 199.9 °C)
1 °C (200 to 300 °C)
0.1 °F (‑58.0 to 399.9 °F)
1 °F (400 to 572 °F)
Meter Accuracy
@ 23.0 °C ±5 °C
±0.4 °C (‑50.0 to 300 °C)
±0.7 °F (‑58.0 to 572 °F)
Probe Accuracy
FC766PW
±1.6 °C (‑50.0 to 300 °C)
±2.9 °F (‑58.0 to 572 °F)
Response time for
90% of final value 20 seconds
Battery type/life 1.5V AAA (3 pcs.)
approx. 3500 hours of continuous use
Auto‑Off user selectable: 8 min, 60 min or
disabled
Environment
Rated operating condition:
‑20 to 50 °C (‑4 to 122 °F)
Limiting condition:
‑30 to 50 °C (‑22 to 122 °F)
Storage and transportation condition:
‑40 to 70 °C (‑40 to 158 °F)
Relative Humidity 100 %
Storage/transport
temperature ‑40 to 70 °C (‑40 to 158 °F)
Dimensions 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)
Mass 178 g (6.27 oz.)
HI935001 SPECIFICATIONS
*The measurement range may be limited by probe type, and
applies to the probe shaft.

10
HI935004 SPECIFICATIONS
Main features:
• EN 13485 compliant
• FC767PW T‑type thermocouple probe
• Calibration Check feature
• Remaining battery life indication/low battery detection
• Auto‑off capability
• Waterproof casing IP65
Interchangeable
T‑type Thermocouple
FC767 series probes
HI935004

11
Range* ‑50.0 to 199.9 °C ; 200 to 300 °C
‑58.0 to 399.9 °F ; 400 to 572 °F
Resolution
0.1 °C (‑50.0 to 199.9 °C)
1 °C (200 to 300 °C)
0.1 °F (‑58.0 to 399.9 °F)
1 °F (400 to 572 °F)
Meter Accuracy
@ 23.0 °C ±5 °C
±0.4 °C (‑50.0 to 300 °C)
±0.7 °F (‑58.0 to 572 °F)
Probe Accuracy
FC767PW
±0.6 °C (‑50 to 100.0 °C)
±1.6 °C (100.0 to 300 °C)
±1.1 °F (‑58 to 212 °F)
±2.9 °F (212 to 572 °F)
Response time for
90% of final value 20 seconds
Battery type/life 1.5V AAA (3 pcs.)
approx. 3500 hours of continuous use
Auto‑Off user selectable: 8 min, 60 min or
disabled
Environment
For air measurement: Type E
For product internal measurement:
Rated operating condition:
‑20 to 50 °C (‑4 to 122 °F)
Limiting condition:
‑30 to 50 °C (‑22 to 122 °F)
Storage and transportation condition:
‑40 to 70 °C (‑40 to 158 °F)
Relative Humidity 100 %
Storage/transport
temperature ‑40 to 70 °C (‑40 to 158 °F)
Dimensions 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)
Mass 178 g (6.27 oz.)
Certification
EN 13485:2001
Suitability: Storage and transport;
Climatic Environment: E;
Accuracy Class: 1;
HI935004 SPECIFICATIONS
*The measurement range may be limited by probe type, and
applies to the probe shaft.

12
HI935007 SPECIFICATIONS
Main features:
• Fixed K‑type thermocouple probe
• Calibration Check feature
• Remaining battery life indication/low battery detection
• Auto‑off capability
• Waterproof casing IP65
Fixed
K‑type Thermocouple probe
HI935007

13
Range* ‑50.0 to 199.9 °C ; 200 to 300 °C
‑58.0 to 399.9 °F ; 400 to 572 °F
Resolution
0.1 °C (‑50.0 to 199.9 °C)
1 °C (200 to 300 °C)
0.1 °F (‑58.0 to 399.9 °F)
1 °F (400 to 572 °F)
System Accuracy
(Meter @ 23.0 °C ±5 °C)
±1 °C (‑50.0 to 100.0 °C)
±2 °C (100.0 to 300 °C)
±1.8 °F (‑58.0 to 212°F)
±3.6 °F (212 to 572 °F)
Response time for
90% of final value 20 seconds
Battery type/life 1.5V AAA (3 pcs.)
approx. 3500 hours of continuous use
Auto‑Off user selectable: 8 min, 60 min or
disabled
Environment
Rated operating condition:
‑20 to 50 °C (‑4 to 122 °F
Limiting condition:
‑30 to 50 °C (‑22 to 122 °F)
Storage and transportation condition:
‑40 to 70 °C (‑40 to 158 °F)
Relative Humidity 100 %
Storage/transport
temperature ‑40 to 70 °C (‑40 to 158 °F)
Dimensions (meter) 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)
Mass (meter) 178 g (6.27 oz.)
HI935007 SPECIFICATIONS
*The measurement range applies to the probe shaft.

14
HI935008 SPECIFICATIONS
Main features:
• EN 13485 compliant
• Fixed T‑type thermocouple probe
• Calibration Check feature
• Remaining battery life indication/low battery detection
• Auto‑off capability
• Waterproof casing IP65
Fixed
T‑type Thermocouple probe
HI935008

15
Range* ‑50.0 to 199.9 °C ; 200 to 300 °C
‑58.0 to 399.9 °F ; 400 to 572 °F
Resolution
0.1 °C (‑50.0 to 199.9 °C)
1 °C (200 to 300 °C)
0.1 °F (‑58.0 to 399.9 °F)
1 °F (400 to 572 °F)
System Accuracy
(Meter @ 23.0 °C ±5 °C)
±0.5 °C (‑50.0 to 100.0 °C)
±1 °C (100.0 to 300 °C)
±0.9 °F (‑58.0 to 212 °F)
±1.8 °F (212 to 572 °F)
Response time for
90% of final value 20 seconds
Battery type/life 1.5V AAA (3 pcs.)
approx. 3500 hours of continuous use
Auto‑Off user selectable: 8 min, 60 min or
disabled
Environment
For air measurement: Type E
For product internal measurement:
Rated operating condition:
‑20 to 50 °C (‑4 to 122 °F)
Limiting condition:
‑30 to 50 °C (‑22 to 122 °F)
Storage and transportation
condition:
‑40 to 70 °C (‑40 to 158 °F)
Relative Humidity 100 %
Storage/transport
temperature ‑40 to 70 °C (‑40 to 158 °F)
Dimensions (meter) 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)
Mass (meter) 178 g (6.27 oz.)
Certification
EN 13485:2001
Suitability: Storage and transport;
Climatic Environment: E;
Accuracy Class: 0.5;
HI935008 SPECIFICATIONS
*The measurement range applies to the probe shaft.

16
HI9350011 SPECIFICATIONS
Main features:
• FC766C1 K‑type thermocouple probe
• Calibration Check feature
• Remaining battery life indication/low battery detection
• Auto‑off capability
• Waterproof casing IP65
HI9350011
Interchangeable
K‑type Thermocouple FC766C1
series probes

17
HI9350011 SPECIFICATIONS
Range* ‑50.0 to 199.9 °C ; 200 to 300 °C
‑58.0 to 399.9 °F ; 400 to 572 °F
Resolution
0.1 °C (‑50.0 to 199.9 °C)
1 °C (200 to 300 °C)
0.1 °F (‑58.0 to 399.9 °F)
1 °F (400 to 572 °F)
Meter Accuracy
@ 23.0 °C ±5 °C
±0.4 °C (‑50.0 to 300 °C)
±0.7 °F (‑58.0 to 572 °F)
Probe Accuracy
FC766C1
±1.6 °C (‑50.0 to 300 °C)
±2.9 °F (‑58.0 to 572 °F)
Response time
for 90% of final value 4 seconds
Battery type/life
1.5V AAA (3 pcs.)
approx. 3500 hours of continuous
use
Auto‑Off user selectable: 8 min, 60 min or
disabled
Environment
Rated operating condition:
‑20 to 50 °C (‑4 to 122 °F)
Limiting condition:
‑30 to 50 °C (‑22 to 122 °F)
Storage and transportation
condition:
‑40 to 70 °C (‑40 to 158 °F)
Relative Humidity 100 %
Storage/transport
temperature ‑40 to 70 °C (‑40 to 158 °F)
Dimensions 140 x 57 x 28 mm (5.5 x 2.2 x
1.1”)
Mass 178 g (6.27 oz.)
*The measurement range may be limited by probe type, and
applies to the probe shaft.

18
HI9350041 SPECIFICATIONS
Main features:
• FC767C1 T‑type thermocouple probe
• Calibration Check feature
• Remaining battery life indication/low battery detection
• Auto‑off capability
• Waterproof casing IP65
HI9350041
Interchangeable
T‑type Thermocouple
FC767C1 series probes

19
HI9350041 SPECIFICATIONS
Range* ‑50.0 to 199.9 °C ; 200 to 300 °C
‑58.0 to 399.9 °F ; 400 to 572 °F
Resolution
0.1 °C (‑50.0 to 199.9 °C)
1 °C (200 to 300 °C)
0.1 °F (‑58.0 to 399.9 °F)
1 °F (400 to 572 °F)
Meter Accuracy
@ 23.0 °C ±5 °C
±0.4 °C (‑50.0 to 300 °C)
±0.7 °F (‑58.0 to 572 °F)
Probe Accuracy
FC767C1
±0.6 °C (‑50 to 100.0 °C)
±1.6 °C (100.0 to 300 °C)
±1.1 °F (‑58 to 212 °F)
±2.9 °F (212 to 572 °F)
Response time for
90% of final value 4 seconds
Battery type/life 1.5V AAA (3 pcs.)
approx. 3500 hours of continuous use
Auto‑Off user selectable: 8 min, 60 min or
disabled
Environment
For air measurement: Type E
For product internal measurement:
Rated operating condition:
‑20 to 50 °C (‑4 to 122 °F)
Limiting condition:
‑30 to 50 °C (‑22 to 122 °F)
Storage and transportation
condition:
‑40 to 70 °C (‑40 to 158 °F)
Relative Humidity 100 %
Storage/transport
temperature ‑40 to 70 °C (‑40 to 158 °F)
Dimensions 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)
Mass 178 g (6.27 oz.)
*The measurement range may be limited by probe type, and
applies to the probe shaft.

20
Each meter is supplied with batteries. Remove the battery
cover, unwrap the supplied batteries and install them while
paying attention to their polarity (see the “Battery replacement”
section for more details).
TAKING MEASUREMENTS
Connect a suitable temperature probe to the meter (see page
25 for a complete list of Hanna Instruments probes).
Note: HI935007 and HI935008 have a fixed probe.
To switch the meter ON, press the ON/OFF button on the front
of the meter. If it does not turn on, make sure that the batteries
are properly installed in their place.
At start‑up the thermometer displays all LCD segments for a few
seconds, followed by the percentage indication of the remaining
battery life. It then enters CAL Check mode followed by measurement
mode.
HI93501
HI935001 and HI935007
HI935004 and HI935008
OPERATIONAL GUIDE
HI9350011
HI9350041