Happy Beds Croxley 5 Drawer Chest User manual

Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.
Croxley 5 Drawer Chest

@
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause damage to the
joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please contact our
customer services (details at the back of these instructions)
(Not metal)
These tools are not
necessary, but may help
to assemble the product.
Do NOT use any power
tools as this may
damage the frame.

Page 3of 

** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
** Note : To secure the item to the wall.
Page 4of 9

Step 1: Assemble hardware(CR),(CL) ON middle devider by hardware G.
Step 2:Assemble hardware(CL) on left side panel by hardware G;Assemble hardware(CR) on right side panel by
hardware G;Then,attach the hardware A on both side panels(3),(4).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 5of 
8
8
A
A

Step 3: Assemble the middle devider(8) and connect panel by hardware C,J;
Assemble the connect panel with 2 side panels(3),(4) by hardware B,C.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach hardware A on top panel(2);
Then assemble the top(2) with the chest frame by hardware B,C.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 6of 
3
4
7

Step 5: Attach the back panel(1) before assemble the bottom panel;Assemble the bottom panel(5) by hardware J;
Then,attach the leg sheet(H) by hardware F.
Step 6: Attach the legs(6),and then attach the pad(I) ；
Attach the hardware O on the back of the item.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 7of 9
3
3
1
O
O
O
O
O
O

Step 7: Assemble the drawer side panels(19),(15) back panel(16) and support bar(18) by hardware D,C;
Attach the bottom panel(17) before assembly the drawer front panel;
Attach the drawer front panel(20) by hardware A,B,C,K;and then,assemble the handle(E);
Attach the hardware(DL),(DR) by hardware G.
Step 8:Assemble the drawer side panels(9),(10)DQG back panel(11) by hardware D;
Attach the bottom panel(12) before assembly the drawer front panel;
Attach the drawer front panel(13),(14)by hardware A,B,K;and then,assemble the handle(E);
Attach the hardware(DL),(DR) by hardware G.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page of 
K
K
K
K
2

Additional Information:
·For complete product information, images and dimension diagrams please visit the website
www.birlea.com
·If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
·Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
PLEASE NOTE that wall fixings are not supplied as different wall materials require different fixing
devices. You must use fixings devices suitable for the type of wall you intend to mount product to.
Ensure the head of any screw used has a diameter greater than the mounting hole and the fixing
is safe and secure before use.
Birlea Furniture advise you use the wall straps provided to further enhance the safety of this
product.
Step 7: Secrue the safty strap(N) by hardware F,M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page of 
F

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
¤ƲȯǛȉƫǛƤƇdzdzɬ٪ƤǕƲƤǯ٪Ƈdzdz٪ȷƤȯƲɦ٪ۂ٪˚ɫǛǾǍȷ٪Ʌȉ٪ƲǾȷɍȯƲ٪ɅǕƲɬ٪ƇȯƲ٪ȷƲƤɍȯƲؘ
ÝǕƲǾ٪ǼȉɥǛǾǍ٪ɬȉɍȯ٪ȬȯȉƫɍƤɅؙ٪ƤƇȯƲnjɍdzdzɬ٪dzǛnjɅ٪ǛǾɅȉ٪ȬdzƇƤƲؘ٪vƲɥƲȯ٪ƫȯƇǍ٪ȉȯ٪ȬɍȷǕ٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪ƇƤȯȉȷȷ٪ɅǕƲ٪˛ȉȉȯ٪Ƈȷ٪
ɅǕǛȷ٪ɦǛdzdz٪ƤƇɍȷƲ٪ƫƇǼƇǍƲ٪Ʌȉ٪ɅǕƲ٪ǬȉǛǾɅȷؘ٪Unj٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪Ǜȷ٪ɍȷƲƫ٪ȉǾ٪ǕƇȯƫ٪˛ȉȉȯǛǾǍؙ٪ȷɍƤǕ٪Ƈȷ٪ɦȉȉƫ٪ȉȯ٪dzƇǼǛǾƇɅƲƫ٪
˛ȉȉȯؙ٪ɬȉɍ٪ǼɍȷɅ٪ȬdzƇƤƲ٪ȷȉǼƲ٪ȬȯȉɅƲƤɅǛȉǾ٪ɍǾƫƲȯ٪ɅǕƲ٪dzƲǍȷ٪Ʌȉ٪ȷɅȉȬ٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪njȯȉǼ٪ǼȉɥǛǾǍؘ٪Unj٪ɅǕǛȷ٪Ǜȷ٪ǾȉɅ٪
adhered to, it could result in failure to the product that will invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
In the unlikely event that you have problems putting this product together or have damaged or
missing parts, please contact us by visiting:
https://www.happybeds.co.uk/customer-service
Notes