Happy Beds Barcelona Low Foot End Bed User manual

Barcelona Low Foot End Bed
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

02
@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

03
HARDWARE
F
1x
G
1x
PARTS
H
1x
I
4x
L
2x
D
13x
C
24x
B
2x
A
8x 10x
E
1
01
1
03
1
04
1
04
1
05
1
06
1
06
1
02
1
07 12X

04
Safety Advice
Please take the time to carefully read through the whole
of these instructions before you commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away
from the work area.
It would be sensible to lay a sheet or blanket on the floor
where you intend to work to avoid scratching this product
and to protect your floor.
This product is heavy. Take extreme care when lifting to
avoid personal injury or damage to the product.
Assemble the product as close to its intended final position
in the room as possible.
: If you keep the hardware in a bowl during
assembly you will be less likely to lose them.
HANDY HINT
.
.
.
.
.
.
.

1
D
10x
D
1
04
D
D
1
04
D
2x
1
05
1
06
DD
D
DD
2
05
H
4x
I
F
1
03
1
01
D+H
D+H
1
03
I
F
I
F
I
F
I
F

A+F
A+F
A+F
E
E
E
EE
8x
A+F
1
04
8x
F
A
A
F
E
E
1
04
3
06
1
05
1
06
1
06
4
5
B+F
E
F
1
02
E
Do not completely tighten the bolts at this stage.
All Bolts can now be tightened.
L
L

C
C
C
C
C
C
C
C
C
C
C
1
07 11X
C
C
C
C
C
C
C
C
C
C
C
G
6
7
07
C
2x
Next attach the remaining slats.
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.
Attach the centre slat first by pushing the side
rails together so that the slat is flush against the
side rail, before inserting the screws.
G
C
C
22x
C
C
1
07
99cm 84cm
G

08
.
www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes