Happy Beds Atlas Single Bed User manual

Atlas Single Bed
Assembly Instructions
www.happybeds.co.uk
Important before assembly: .
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause damage to the
joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please contact our
customer services (details at the back of these instructions)
(Not metal)
These tools are not
necessary, but may help
to assemble the product.
Do NOT use any power
tools as this may
damage the frame.

Page 2 of 4
PART LIST
PART
1 1 8
2 1 6
312
41
51
6
24
7
A
B
C
D
E
F
1
1
1
DESCRIPTION
Headend
Footend
Side Support
Mid Support
M8 x 20mm JCBC Screw
M6 x 12mm JCBC
∅2 2xM6x15mm
Slat Cap
M4
M5
DESCRIPTIONBOX QTY
HARDWARE LIST (FOUND IN BOX 1)
PART
IMPORTANT: DO NOT SCREW UP THE RACK TIGHTLY UNTIL ALL PARTS
ARE WELL SET WITH PROPER HARDWARES IN PLACE！！！
1
1
2
2
1
QTY
Vendor: S000053
Slat 12
1
Side Frame 2
Side Support
8
Finials 14
7

Vendor: S000053
Step 2:
Page 3 of 4
Step 1:
B
B
B
4
6
6
6
B
B
C
C
B
B
B
E
A
A
F

Vendor: S000053
Step 3:
Page 4 of 4
D x 24
8
Step 4:
D x24 8 x12
8
F
2
A

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the floor as
this will cause damage to the joints. If the product is used on hard flooring, such as wood or laminated
floor, you must place some protection under the legs to stop the product from moving. If this is not
adhered to, it could result in failure to the product that will invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
In the unlikely event that you have problems putting this product together or have damaged or
missing parts, please contact us by visiting:
https://www.happybeds.co.uk/customer-service
Notes