HAPRO DecoShield User manual

Decoshield
ITA
FRA
NLD
DEU
ENG
SPA
CES
POL
HUN
RUS
DNK
FIN
NOR
SWE
Owner’s manual
Anleitung
Handleiding
Mode d’emploi
Instruzioni per l’uso
Modo de empleo
Návod k obsluze
Instrukcja obsługi
Használati útmutató
Руководство
Brugermanual
Käyttöohjeet
Eierens håndbok
Ägarens handbok
Colormixing
RC-100
ON/OFF LOCK
P1 FADE
P2 P3
P4 P5
SPEED
BRIGHTNESS

2
Headquarters
Hapro International
P.O.Box 73
4420 AC Kapelle
The Netherlands
Tel.: [phone]
Fax.: [phone]
Office Germany
Hapro Deutschland GmbH
Südring 30
56412 Ruppach-Goldhausen
Germany
Tel: [phone] – 9400-0
Fax: [phone] – 940049

3
Headquarters
Hapro International
P.O.Box 73
4420 AC Kapelle
The Netherlands
Tel.: [phone]
Fax.: [phone]
Office Germany
Hapro Deutschland GmbH
Südring 30
56412 Ruppach-Goldhausen
Germany
Tel: [phone] – 9400-0
Fax: [phone] – 940049
Colormixing
RC-100
ON/OFF LOCK
P1 FADE
P2 P3
P4 P5
SPEED
BRIGHTNESS
1On/ O 7Color program 1
2Lock 8Fade
3Speed + 9Color program 2
4Speed - 10 Color program 3
5Brightness + 11 Color program 4
6Brightness - 12 Color program 5
Operation
General:

4
Controle functions
Press button [1] to switch the power o or on.
Selecting static colors
Press button [7] and select one of the following static colors:
Red, yellow, yellow/green, green, cyan, blue, purple and white.
Switch between colors by pressing button [7] again.
When [5] or [6] is pressed, the brightness changes.
Selecting a color program
Select a color program by pressing button [ 9], [10], [11] or [12]. The color changes, shifting through the
chosen color program.
[9] color sequence: red, yellow, green, cyan, blue, purple
[10] color sequence: purple, red, white, blue, purple, white, yellow, green, white
[11] color sequence: red, green, blue
[12] color sequence: red, o, green, o, blue, o
When [5] or [6] is pressed, the brightness changes.

5
Starting a smooth color change
If color program P2, P3, P4 or P5 is selected, press button [8] to start a smooth color-
change. Press button [8] again to switch back to rapid transition mode.
Changing transition speed
If color program P2- P5 is selected, press button [5] or [6] to change the transition speed.
Locking a color
To lock a specic color from program P2-P5, press button [2]. Press button [2] again to
unlock the color. The smooth color-change or rapid transition mode starts again.
Note:
Locked colors (P2-P5) cannot be stored when the power is switched o. When the power is
switched on, the last selected program starts automatically.

6
MontageMontage
MontageMontage
1
4 x M6 x 12
2

MontageMontage
7
MontageMontage
3
2 x M6 x 12
4

8
MontageMontage
MontageMontage
1
4 x M6 x 20
2
5

MontageMontage
9
MontageMontage
6
? ?
7 10
7
2
1

10
MontageMontage
MontageMontage
4 x M6 x 20
1
2
8
9

MontageMontage
11
MontageMontage
10
22850 Decoshield plus

a VDL Company
www.hapro.com
©2009 Hapro International, 21591 rev.02