Hario CMHC-4C User manual

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●

1.
3.
2.
Burr : Ceramic
Shaft・Stopper
: Iron
Handle grip：Wood
Wooden part：Wood
Handle : Iron
Stopper : Iron
Band・Latch : Iron
Glass bowl : Soda-lime glass
Cover : Polypropylene
Grind adjustment nut
Grind adjustment nut : Iron
Washer : Polypropylene
Handling precautions
Adjusting the coffee grind
CMHC-4C
Canister Coffee Mill C
Body (Hopper)
: Iron
When storing
Cork stopper
Spacer : Silicone
Material guide
Fine Medium fine Medium Coarse
Particle
size
Equipment
Paper drip (V60)
Coffee maker
French press
Nel drip
(Flannel Filter)
Paperless filter
(Cafeor)
Water drip
Syphon
●
●
●
●
●
●
●
●●
●●
●
●●
●
The appropriate way to grind for a coffee equipment.
Thank you very much for your purchase.
To use the product correctly, please be sure to read this
instruction manual.
After reading the manual, store it in a safe place.
Instruction Manual
Features
◆Do not use for anything other than coffee beans, because doing so may
break the mill.
◆Do not put your fingers inside the grinder when turning the handle,
because doingso is dangerous.
◆Please note that if ceramic burr is hit against hard material or the
product is dropped, it may result in chipping or damages to ceramic burr.
◆Refrain from using cracked, chipped, or highly-scratched glass since it
may break unexpectedly.
◆Do not use a metal spoon inside the glass bowl. It may cause breakage.
◆Be careful when handling chipped or broken glass parts.
◆Please follow your local regulations for disposal.
Please do not let the wooden and metal parts get wet when washing.
If the wooden and metal parts get wet, wipe the part with a soft cloth
to remove any excess water.
台
所
用
ク
レ
ン
ザ
ー
Sponge Milddish
detergent
Steelbrush Abrasivecleanser
+metalbrush
Cleanser Abrasivecleanser
+sponge
Please spin the handle clockwise. Never freely spin
the handle or turn it in reverse, because doing so will
damage the grinder.
Do not let children use this product. Do not use next to
a child and keep out of reach of children.
Do not use a dishwasher. Do not use household bleach.
Please do not put boiling water in the glass bowl
because it is not heatproof glass. The sudden
temperature change will cause it to break.
Handle the glassware with the utmost care.
Do not soak the product in water. Do not keep/use the
product in hot and/or humid location and avoid
exposure to direct sunlight. It may result in corrosion,
rusting, or cracking.
Please remove the cover before grinding the coffee
beans. When storing, set the cover back on.
Do not use oil for cleaning.
Use a soft sponge and mild dish detergent for cleaning.
Do not use sponges with abrasive or metal scouring
pads as they may cause damage.Do not use abrasive
cleansers. They may damage or scratch the surface of
the glassware.
◆If you turn the grind adjustment nut too far to the right (clockwise),
the burr will touch each other, scratch and may cause a malfunction.
◆If small split beans or other objects get into the level difference
inside the unit (hopper) or the gaps, the coffee beans may not fall
down smoothly and the handle may freely spin. When grinding the
coffee beans, occasionally tap the unit lightly.
◆With long-term use, the burr may wear and become blunter. When
the amount of beans that can be ground drops significantly, it is time
to replace the product.
Product care - Glass
●
9-3 Nihonbashi Tomizawa-Cho,
Chuo-ku,Tokyo 103-0006 Japan
http://www.hario.jp
HARIO CO., LTD.
①Turn the locking screw counterclockwise and remove it.
②Remove the handle and stopper.
③Turn the grind adjustment nut to the desired grind level.
④Lock the grind adjustment nut with the stopper.
⑤Install the handle and locking screw.
Locking screw
Locking screw : Brass
Anti-slip cover : Silicone
Turn right (clockwise)
to make the grind finer,
and turn left
(counterclockwise)
to make it coarser.
Fine
Coarse
Stopper
Lock the grind
adjustment nut
in the desired position.
Handle
If you turn the grind
adjustment nut too far to
the right (clockwise),
the burr will touch each
other, scratch and may
cause a malfunction.
Put a small amount of coffee beans into the hopper
and grind the beans to adjust the grind level. (Refer to
“Adjusting the coffee grind”.)
10-12g is normally good for one serving (120ml). Only
add more beans when the previous amount has
lessened. Big amounts of coffee beans will cause the
handle to become heavier or the beans to fly out.
Hold the grinder tightly and spin the handle clockwise
slowly to grind the beans. (Please do not spin the
handle counterclockwise because you will damage the
burr.)
When using
Please use the cork stopper
attached to the back of the
wooden part when storing the
coffee powder.
Please remove the
cork stopper before
grinding the coffee
beans.
The way of grinding beans may differ depending on what kind of coffee
equipment you use, so please follow the instructions accordingly. *Please
use fresh coffee beans every time.
It will not have a metallic taste or rust because it is a ceramic
burr. In addition, it provides consistent and durable
performance.
Ceramic burr avoids frictional heat with the coffee beans so
they can prevent the oxidation of coffee beans.
Canister Coffee Mill C can be used for storing ground coffee.
●
●
●