Harken Industrial IN627 User manual

5172/8-17
Part Number: IN627
Rated Load: 8.75 kN
Rated for 1 user,
Max 150 kg
PRODUCT MANUAL
SMALL ROUND ANCHORAGE POINT
HARKEN INC, N15W24983 Bluemound Rd., Pewaukee, WI 53072, USA, Tel: [phone]
HARKEN UK Ltd, Bearing House, Ampress Lane, Lymington, SO41 8LW, UK, Tel: [phone]
Web: www.harkenindustrial.com • Email: [email protected]
Protection against falls from a height
Anchor devices – requirements and
testing Class A – structural anchors
EN795:2012 Class A
Note: Actual product will have a serial number and max. load etched on
EU Representative
Harken UK Ltd, Bearing House, Ampress Lane,
Lymington, UK, SO41 8LW
T: [phone]
E: [email protected]
W: www.harkenindustrial.com
WARNING!
Activities involving the use of this
equipment are inherently dangerous.
You are responsible for your own
actions and decisions.
FAILURE TO HEED ANY OF THESE WARNINGS MAY
RESULT IN SEVERE INJURY OR DEATH
Before using this equipment, you must:
• Read and understand all instructions for use.
• Get specific training in its proper use
• Become acquainted with its capabilities and limitations
• Understand and accept the risks involved
SPECIFICATIONS
Weight 118 grams
Material 17-4 PH stainless
MRL Goods & Eqt.
(Breaking Load/4) 8.75 kN (EN 795)
Breaking Load 35 kN
Recommended
Fasteners
4 x M6
(recommend A2 70 SS)
Certified to EN 795:2012 One person fall arrest
and human suspension
WARNING!
THIS PRODUCT IS PART OF A PERSONAL
FALL ARREST / HUMAN SUSPENSION ANCHOR
ORIENTATION
It is the installer’s responsibility to ensure the suitability
of base materials into which the structural anchor device
is fixed.
Alterations or misuse of this equipment, or failure to follow
these instructions, may result in a fall or failure to arrest a
fall leading to serious injury or death.
Dims (mm) (inches)
A 57 2.25
C 27 1.1
D 30 1.2
E 30 1.2
F 16 0.6
G 24 1.3
E
D
C
A
FG
5172/8-17
Part Number: IN627
Rated Load: 8.75 kN
Rated for 1 user,
Max 150 kg
PRODUCT MANUAL
SMALL ROUND ANCHORAGE POINT
HARKEN INC, N15W24983 Bluemound Rd., Pewaukee, WI 53072, USA, Tel: [phone]
HARKEN UK Ltd, Bearing House, Ampress Lane, Lymington, SO41 8LW, UK, Tel: [phone]
Web: www.harkenindustrial.com • Email: [email protected]
Protection against falls from a height
Anchor devices – requirements and
testing Class A – structural anchors
EN795:2012 Class A
Note: Actual product will have a serial number and max. load etched on
EU Representative
Harken UK Ltd, Bearing House, Ampress Lane,
Lymington, UK, SO41 8LW
T: [phone]
E: [email protected]
W: www.harkenindustrial.com
WARNING!
Activities involving the use of this
equipment are inherently dangerous.
You are responsible for your own
actions and decisions.
FAILURE TO HEED ANY OF THESE WARNINGS MAY
RESULT IN SEVERE INJURY OR DEATH
Before using this equipment, you must:
• Read and understand all instructions for use.
• Get specific training in its proper use
• Become acquainted with its capabilities and limitations
• Understand and accept the risks involved
SPECIFICATIONS
Weight 118 grams
Material 17-4 PH stainless
MRL Goods & Eqt.
(Breaking Load/4) 8.75 kN (EN 795)
Breaking Load 35 kN
Recommended
Fasteners
4 x M6
(recommend A2 70 SS)
Certified to EN 795:2012 One person fall arrest
and human suspension
WARNING!
THIS PRODUCT IS PART OF A PERSONAL
FALL ARREST / HUMAN SUSPENSION ANCHOR
ORIENTATION
It is the installer’s responsibility to ensure the suitability
of base materials into which the structural anchor device
is fixed.
Alterations or misuse of this equipment, or failure to follow
these instructions, may result in a fall or failure to arrest a
fall leading to serious injury or death.
Dims (mm) (inches)
A 57 2.25
C 27 1.1
D 30 1.2
E 30 1.2
F 16 0.6
G 24 1.3
E
D
C
A
FG
5172/8-17
Part Number: IN627
Rated Load: 8.75 kN
Rated for 1 user,
Max 150 kg
PRODUCT MANUAL
SMALL ROUND ANCHORAGE POINT
HARKEN INC, N15W24983 Bluemound Rd., Pewaukee, WI 53072, USA, Tel: [phone]
HARKEN UK Ltd, Bearing House, Ampress Lane, Lymington, SO41 8LW, UK, Tel: [phone]
Web: www.harkenindustrial.com • Email: [email protected]
Protection against falls from a height
Anchor devices – requirements and
testing Class A – structural anchors
EN795:2012 Class A
Note: Actual product will have a serial number and max. load etched on
EU Representative
Harken UK Ltd, Bearing House, Ampress Lane,
Lymington, UK, SO41 8LW
T: [phone]
E: [email protected]
W: www.harkenindustrial.com
WARNING!
Activities involving the use of this
equipment are inherently dangerous.
You are responsible for your own
actions and decisions.
FAILURE TO HEED ANY OF THESE WARNINGS MAY
RESULT IN SEVERE INJURY OR DEATH
Before using this equipment, you must:
• Read and understand all instructions for use.
• Get specific training in its proper use
• Become acquainted with its capabilities and limitations
• Understand and accept the risks involved
SPECIFICATIONS
Weight 118 grams
Material 17-4 PH stainless
MRL Goods & Eqt.
(Breaking Load/4) 8.75 kN (EN 795)
Breaking Load 35 kN
Recommended
Fasteners
4 x M6
(recommend A2 70 SS)
Certified to EN 795:2012 One person fall arrest
and human suspension
WARNING!
THIS PRODUCT IS PART OF A PERSONAL
FALL ARREST / HUMAN SUSPENSION ANCHOR
ORIENTATION
It is the installer’s responsibility to ensure the suitability
of base materials into which the structural anchor device
is fixed.
Alterations or misuse of this equipment, or failure to follow
these instructions, may result in a fall or failure to arrest a
fall leading to serious injury or death.
Dims (mm) (inches)
A 57 2.25
C 27 1.1
D 30 1.2
E 30 1.2
F 16 0.6
G 24 1.3
E
D
C
A
FG
5172/8-17
Part Number: IN627
Rated Load: 8.75 kN
Rated for 1 user,
Max 150 kg
PRODUCT MANUAL
SMALL ROUND ANCHORAGE POINT
HARKEN INC, N15W24983 Bluemound Rd., Pewaukee, WI 53072, USA, Tel: [phone]
HARKEN UK Ltd, Bearing House, Ampress Lane, Lymington, SO41 8LW, UK, Tel: [phone]
Web: www.harkenindustrial.com • Email: [email protected]
Protection against falls from a height
Anchor devices – requirements and
testing Class A – structural anchors
EN795:2012 Class A
Note: Actual product will have a serial number and max. load etched on
EU Representative
Harken UK Ltd, Bearing House, Ampress Lane,
Lymington, UK, SO41 8LW
T: [phone]
E: [email protected]
W: www.harkenindustrial.com
WARNING!
Activities involving the use of this
equipment are inherently dangerous.
You are responsible for your own
actions and decisions.
FAILURE TO HEED ANY OF THESE WARNINGS MAY
RESULT IN SEVERE INJURY OR DEATH
Before using this equipment, you must:
• Read and understand all instructions for use.
• Get specific training in its proper use
• Become acquainted with its capabilities and limitations
• Understand and accept the risks involved
SPECIFICATIONS
Weight 118 grams
Material 17-4 PH stainless
MRL Goods & Eqt.
(Breaking Load/4) 8.75 kN (EN 795)
Breaking Load 35 kN
Recommended
Fasteners
4 x M6
(recommend A2 70 SS)
Certified to EN 795:2012 One person fall arrest
and human suspension
WARNING!
THIS PRODUCT IS PART OF A PERSONAL
FALL ARREST / HUMAN SUSPENSION ANCHOR
ORIENTATION
It is the installer’s responsibility to ensure the suitability
of base materials into which the structural anchor device
is fixed.
Alterations or misuse of this equipment, or failure to follow
these instructions, may result in a fall or failure to arrest a
fall leading to serious injury or death.
Dims (mm) (inches)
A 57 2.25
C 27 1.1
D 30 1.2
E 30 1.2
F 16 0.6
G 24 1.3
E
D
C
A
FG

WARNING!
DO NOT CONTINUE TO USE THIS PRODUCT
AFTER A MAJOR SHOCK LOADING OR FALL
ARREST, EVEN IF NO VISIBLE SIGNS ARE
PRESENT.
1. APPLICATION
The IN627 stainless steel round anchorage point is
designed to be an anchorage which can be permanently
secured to a structure (i.e. side of a vessel) to which a
connection device or personal protective equipment can
be attached thus facilitating safe working at height.
The anchorage point has been subject to type testing and
fully complies with the requirements of EN 795:2012
(Class A).
They are appropriate for single person use with an energy
absorber to EN 355, and a fall arrester to EN 360.
2. USE
Each time before use, the anchorage point should
be inspected to ensure that it is in good order.
Should the equipment be subjected to the forces
of arresting a fall, it should be removed from service
immediately and replaced.
3. INSTALLATION & ORIENTATION
It is the installer’s responsibility to ensure the suitability of
base materials into which the structural anchor device is fixed
and that it is capable of sustaining the test forces as detailed
in EN 795:2012, Class A.
The height of the anchor point must be carefully chosen
according to the work or inspections to be carried out.
The clearance, or pendulum movement, in the event of a fall
must be free of any obstruction.
Always check that this product is compatible with the other
components of your equipment.
4. INSPECTION
Before and after each use it is necessary to check the
condition of the product. Always scrap a product
showing signs of wear, which might affect its strength.
Ensure all markings/labels are present and legible.
Verify there are no cracks, deformation, corrosion etc.
Inspect all pieces of the equipment in the system to ensure
they are in good condition and correctly positioned while
in use. An in-depth inspection must be carried out by
a competent inspector, at least every 12 months. This
inspection must be recorded as per the example below:
12 MONTH INSPECTION
Model No:
Serial No:
Purchase date:
Date of first use:
User name:
Notes:
Signed by:
Date:
Name:
5. MODIFICATIONS & REPAIRS
WARNING!
DO NOT REPAIR OR MODIFY THIS PRODUCT
6. STORAGE
Do not put in contact with corrosive materials and solvents
Do not store at extreme temperatures.
7. WARRANTY
This product is under warranty for 12 months from the date
of receipt of the product by the final customer.
Exclusions: normal wear and tear, oxidation, modifications or
alterations, incorrect storage, poor maintenance, negligence,
uses for which this product is not designed.
See full warranty conditions on www.harkenindustrial.com
8. RESPONSIBILITY
Harken is not responsible for the consequences, direct or
indirect, or accidental, or any other type of damage befalling
or resulting from the use of its products.
9. DECLARATION OF CONFORMITY
Harken UK Ltd, as the authorised EU representative, declares
that this product meets and exceeds the load requirements of
EN 795:2012 Class A.
Compliance has been demonstrated with reference to:
BS EN 795:2012 Class A.
The authorised representative retains a technical file for this
equipment.
Catherine Ash-Vie
15 December 2012
Harken UK Ltd, Bearing House, Ampress Lane
Lymington, UK SO41 8LW.