Harken Industrial CMC CLUTCH User manual

Activities involving the use of this device are potentially dangerous. You are responsible for your
own actions and decisions. Before using this device, you must:
• Read and understand these user instructions, labels, and warnings.
• Familiarize yourself with its capabilities and limitations.
• Obtain specic training in its proper use.
• Understand and accept the risks involved.
FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE INJURY OR DEATH.
Find the latest version and translations of the CLUTCH Manual at cmcpro.com
Patented
by
11 mm (7/16 in) CLUTCH
WARNINGS
ANSI/ASSE Z359.4-2013
GENERAL USE (G)
NFPA 2500 (1983),
2022 ED.
EN 12841:2006/C
EN 341:2011/2A
EN 15151-1: 2012/8
2008
EN
ES
FR
DE
IT
CN
PL
JP
SV

CLUTCH USER MANUAL2
NFPA CERTIFICATION INFORMATION
MEETS THE PULLEY, DESCENT CONTROL AND BELAY DEVICE
REQUIREMENTS OF NFPA 1983, INCORPORATED IN THE 2022
EDITION OF NFPA 2500.
335011-01 CLUTCH, 11 MM
• GENERAL USE (G), MBS 40KN (8,992 LBF) PULLEY
• GENERAL USE (G), DESCENT CONTROL, Ø 10.5 – 11 MM
• GENERAL USE (G), BELAY DEVICE, Ø 10.5 – 11 MM
THIS DESCENT CONTROL AND BELAY DEVICE HAS PASSED THE MANNER OF
FUNCTION AND HOLDING LOAD TESTS USING THE FOLLOWING ROPES:
• CMC G11™LIFELINE 11 MM P/N 28311X
• TEUFELBERGER KMIII 10.5 MM P/N C330X-05-00600
FOR INFORMATION ON PERFORMANCE WHEN USED WITH OTHER LIFE
SAFETY ROPES, PLEASE CONTACT CMC OR SEE THE CLUTCH TECHNICAL
CONTENT AVAILABLE AT CMCPRO.COM

CLUTCH USER MANUAL 3
CONTENTS
1 | TRACEABILITY & MARKINGS 4
2 | FIELD OF APPLICATION 5
3 | NOMENCLATURE 6
4 | INSPECTION POINTS TO VERIFY 7
5 | COMPATIBILITY 8
6 | WORKING PRINCIPLE 9
7 | INSTALLATION / RIGGING 10
8 | FUNCTION TEST 12
9 | SECURING / TIE-OFF 13
10 | PRECAUTIONS FOR USE 14
11 | WORK POSITIONING AND DECENT - EN 12841/C 16
12 | DESCENT AND LOWERING - EN 341/2A 16
13 | ANSI Z359.4 17
14 | HEAVY LOADS / EXPERT USE ONLY 18
15 | NFPA 2500 (2022 ED) 18
16 | RESCUE SYSTEM BELAYING 18
17 | HAULING 19
18 | BELAYING LEAD CLIMBER - EN 15151-1 TYPE 8 20
19 | ASCENDING 21
20 | ADDITIONAL INFORMATION 21
21 | EQUIPMENT RECORD 22
22 | PERIODIC CHECKS AND INSPECTIONS 23
23 | MANUAL TEXT 24
Page No.

CLUTCH USER MANUAL4
1 TRACEABILITY & MARKINGS
I, L
A
D
C
G, H
E
F
B
M
J
K

CLUTCH USER MANUAL 5
A Mark and Information of
Certication Body
2008
DOLOMITICERT SCARL
(N.B. 2008) 7/A Via Villanova,
Longarone, BL 32013, Italy
Tel. [phone]
Fax [phone]
B
C Standard Markings
MEETS NFPA 2500 (1983), 2022 ED.
Descent Control “G” Ø 10.5 – 11mm
Belay “G” Ø 10.5 – 11 mm
Pulley, “G” MBS 40 kN, Becket 22 kN
ANSI Z359.4-2013
60-141 kg
Ø 11 mm ONLY
!X m/s
max
!
!
MAX 200m Multiple Use n=2
Avoid chemical, thermal or electrical
hazards
EN 341: 2011/2A
Teufelberger PATRON
Ø 10.5 mm MAX 200 m, 30-230 kg
Ø 11 mm MAX 200 m, 30-240 kg
T >-30°C
EN 12841: 2006/C
200kg Ø 10.5 - 11 mm, 2.0 m/s MAX
240kg Ø 10.5 - 11 mm, 0.5 m/s MAX
EN 15151-1: 2012/8
Ø 10.5 – 11 mm
D Carefully Read the Instructions for
Use
E Model Identication 335011-01
F Individual Number
0000 000 - 000
Unit Serial Number
Control
Day of Manufacture
Year of Manufacture
G Inspection Interval (Minimum 12
months)
H Special Notice or Caution
!X m/s
max
!
!
I Antipanic Stop
J Anchor/Load End of Rope
K Free End of Rope
L Handle Positions
M Manufacturer & Contact Information
CMC Rescue, Inc.
6740 Cortona Drive
Goleta, CA 93117
United States
International: 800-513-7455
Domestic U.S.: 805-562-9120
2 FIELD OF APPLICATION
SEE TEXT FOR INFORMATION

CLUTCH USER MANUAL6
3 NOMENCLATURE
11
2
6
13
14

CLUTCH USER MANUAL 7
4 INSPECTION POINTS TO VERIFY
Wear
Indicator x3
Wear
Indicator

CLUTCH USER MANUAL8
5 COMPATIBILITY
SEE TEXT FOR INFORMATION
CABLE
EN 12841/C Descender
= EN 1891 Type A
10.5 ≤ Ø ≤ 11 mm MAX 200 kg, 2.0 m/s MAX
10.5 ≤ Ø ≤ 11 mm MAX 240 kg, 0.5 m/s MAX
EN 341/2A Rescue and Evacuation Device
= EN 1891 Type A
Teufelberger Patron Ø 10.5mm 30-230kg, MAX 200m
Teufelberger Patron Ø 11mm 30-240kg, MAX 200m
EN 15151-1/8 Belay Device
= EN 892 Single, 10.5 ≤ Ø ≤ 11 mm
= EN 1891/A, 10.5 ≤ Ø ≤11 mm for abseiling only
ANSI-ASSE Z359.4 Rescue and Evacuation Descent Device
CMC G11 Lifeline Ø 11mm 60-141kg MAX 200m
NFPA 2500 (1983), 2022 ED. “GENERAL USE” Descent Control Device / Belay Device / Pulley
Teufelberger KMIII Ø 10.5 mm Technical Use Life Safety Rope
CMC G11 Lifeline Ø 11mm General Use Life Safety Rope

CLUTCH USER MANUAL 9
6 WORKING PRINCIPLE
!
!
!
Lower/Descent Stop Antipanic Stop
!
!
Lock Haul

CLUTCH USER MANUAL10
2x
7 INSTALLATION / RIGGING
!
Loading the rope incorrectly
could cause imminent risk of
injury or death.
Installing the Rope
Usage on Anchor

CLUTCH USER MANUAL 11
Locking the Side Plate and Latch

CLUTCH USER MANUAL12
!
!
23 1
4
!X m/s
max
!
!
8 FUNCTION TEST
!X m/s
max
!
!
WARNING: DANGER OF DEATH. Do not allow anything to interfere with the
operation of the device or its components (Sheave, Control Handle, etc.). Any
constraint on the device may negate the braking function.

CLUTCH USER MANUAL 13
9 SECURING / TIE-OFF
!X m/s
max
!
!

CLUTCH USER MANUAL14
10 PRECAUTIONS FOR USE
!X m/s
max
!
!
!X m/s
max
!
!

CLUTCH USER MANUAL 15
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!

CLUTCH USER MANUAL16
11 WORK POSITIONING AND DECENT - EN 12841/C
12 DESCENT AND LOWERING - EN 341/2A
DESCENT SPEED
30–200 kg = 2 m/s MAX
200–240 kg = 0.5 m/s MAX
5
6
7
8
!

CLUTCH USER MANUAL 17
13 ANSI Z359.4
SEE TEXT FOR INFORMATION
CABLE
Working load limit
(EN341)
Rope
Teufelberger
Patron 10.5 mm 230 kg
Teufelberger
Patron 11 mm 240 kg
Maximum
Descent
200m
200m
1. Sheath Slippage (%)
2. Elongation (%)
3. Mass of the Sheath (%)
0.5
Teufelberger
Patron 10.5 mm
Teufelberger
Patron 11 mm
0.2
3 3
46 35
4. Mass of the Core
Material (%) 54 65
5. Mass per Unit
Length (g/m) 72 75
6. Shrinkage (%) 4 4
7. Material Nylon Nylon

CLUTCH USER MANUAL18
14 HEAVY LOADS / EXPERT USE ONLY
.5 m/s
max
.5 m/s
max
15 NFPA 2500 (2022 ED)
SEE TEXT FOR INFORMATION
16 RESCUE SYSTEM BELAYING

CLUTCH USER MANUAL 19
17 HAULING

CLUTCH USER MANUAL20
18 BELAYING LEAD CLIMBER - EN 15151-1 TYPE 8