Harman Kardon HK 3700 User manual

Harman Kardon Service Manual
HK 3770
2x120 W stereo receiver
Released EU2014 Harman Consumer Group, Inc. Rev 0, 00/20XX
8500 Balboa Boulevard
Northridge, California 91329
CONTENTS
RESET PROCEDURE 15
FIRMWARE UPGRADE INSTRUCTIONS 16
BILL OF MATERIALS 19
IC PINOUTS 50
TRANSISTOR PINOUTS 64
PRINT DRAWINGS 88
BLOCK DIAGRAMS 106
WIRING DIAGRAM 108
SCHEMATIC DIAGRAMS 109
BOX CONTENTS 2
FRONT PANEL FUNCTIONS 4
BACK PANEL FUNCTIONS 5
REMOTE CONTROL FUNCTIONS 6
TROUBLESHOOTING 8
TECHNICAL SPECIFICATIONS 9
PACKAGE DRAWING 11
EXPLODED VIEW AND PARTS 12
DISASSEMBLY 13
BIAS ADJUSTMENT 14

Introduction
3
HK 3700/3770
Introduction
Thank you for purchasing the Harman Kardon® HK 3700/3770 stereo receiver with
which, you are about to begin many years of listening enjoyment. The HK 3700/3770
stereo receiver has been custom-designed to provide excitement and power of the
cinema experience in your living room.
To obtain maximum enjoyment from your new soundbar speaker system, we urge you
to take a few minutes to read through this manual, which:
• Contains a description of the features of HK 3700/3770 stereo receiver
• Lists the items included in the box
• Describes the HK 3700/3770 stereo receiver and its components
• Includes step-by-step instructions that will help you set up and get started
with the HK 3700/3770 stereo receiver
In addition, a few minutes spent learning the functions of the various controls will allow
you to take advantage of all the power and refinement of the HK 3700/3770 stereo
receiver.
CONTACT US: If you have any questions about HK 3700/3770 receiver, its installation
or its operation, please contact your retailer or custom installer, or visit our website at:
www.harmankardon.com
Description and Features
Harman Kardon heritage and brand legacy has been its two-channel audio for many
years.
As more and more audio content comes from multiple digital-based sources, such as a
‘smart’ TV, smartphone or tablet, playback convenience becomes the driving factor in
entertainment while sound quality remains the foundation of Harman Kardon.The new
Harman Kardon HK stereo receivers try to bring the best of both the worlds: beautiful
two channel stereo sound and latest digital-based sources access.
The following are the features and benefits of the Harman Kardon 3700/3770 stereo
receivers:
• Harman Kardon sound — This has been the foundation of the brand for
many years. High power high current capability with stable power output
even with variation of the load impedance of the speaker drivers.
• Connectivity — HK stereo receivers feature the best of both the worlds:
classic analog inputs including phono input, FM/AM radio as well as new
digital connectivity with Bluetooth, network DLNA, vTuner internet radio,
USB, iOS direct thru USB with built in superior DAC and optical digital input.
• Distinctive and elegant design — Based on the current design and chassis
of AVR1x1 series.
• Advance remote control — The new stereo receivers also support iOS
and Android app to fully control the stereo receiver from Harman Kardon
Remote app for maximum ease and enjoyment.
Included Items
The HK 3700/3770 stereo receiver consists of the following accessories:
• System remote control
• EzSet/EQ™ microphone
Harman Kardon
HK 3770 Service Manual
Page 2 of 120

HK 3700/3770 Important Safety Information
4
• AM loop antenna
• FM Loop antenna
• Two AAA batteries
• AC power cord
IMPORTANT: If any of these accessories is missing or if any part of your
HK 3700/3770 system fails to operate properly, contact your dealer
immediately.
Important Safety Information
Verify Line Voltage before Use
The HK 3700/3770 has been designed for use with 100- 240 Volt Alternating Current
(AC). Connection to a line voltage other than that for which your HK 3700/3770 is
intended can create a safety and fire hazard, and may damage the unit. If you have
any questions about the voltage requirements for your specific model or about the line
voltage in your area, contact your selling dealer before plugging the unit into a wall
outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. We do not
recommend the use of extension cords with this product. Do not run power cords
under rugs or carpets, or place heavy objects on them. Damaged power cords should
be replaced immediately by an authorized service center, with a cord, meeting factory
specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug; never pull
the cord. If you do not intend to use your HK 3700/3770 for any considerable length of
time, disconnect the plug from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product. Opening the cabinet may
present a shock hazard, and any modification to the product will void your warranty. If
water or any metal object such as a paper clip, wire or staple accidentally falls inside the
unit, disconnect it from the AC power source immediately, and consult an authorized
service center.
CATV or Antenna Grounding
If an outside antenna or cable system is connected to this product, be certain that it is
grounded so as to provide some protection against voltage surges and static charges.
Section 810 of the United States National Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes and
requirements of the grounding electrode.
Note to CATV System Installer:This reminder is provided to call the CATV (Cable
TV) system installer’s attention to article 820-40 of the NEC, which provides guidelines
for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry
as possible.
Placing the Stereo Receiver
• Place the Stereo receiver on a firm and level surface. Be certain that the
surface and any mounting hardware can support the Stereo receiver’s
weight.
• Provide proper space above, below, behind and to the sides of the Stereo
receiver for ventilation. Maintain a clearance of at least 12” (30 cm) on each
side of, above and behind the unit.
• If you install the Stereo receiver in a cabinet or other enclosed area, provide
cooling air within the cabinet. Under some circumstances, a fan may be
required.
• Do not obstruct the ventilation slots on the top of the Stereo receiver or
place objects directly over them.
• Do not place the Stereo receiver directly on a carpeted surface.
• Do not place the Stereo receiver in moist or humid locations, in extremely
hot or cold locations, in areas near heaters or heat registers, or in direct
sunlight.
Harman Kardon
HK 3770 Service Manual
Page 3 of 120

HK 3700/3700 Receiver Front Panel Controls
5
HK 3700/3770
HK 3700/3700 Receiver Front Panel Controls
The following are the fron panel controls available in the HK 3700/3770 stereo receiver:
1. Power indicator
2. Power switch
3. Play/Pause
4. Menu
5. Back
6. Select previous
7. OK
8. Select Next
9. Message display
10. Tuning
11. Tuner mode selector
12. Harman Volume
13. Bluetooth
14. Source selector
15. Volume control
16. Phono input
1. Power indicator: This indicates the status of the stereo receiver whether it is in
Operational, OFF, or sleep mode.
2. Power switch: Press this button to turn the stereo receiver ON. When the HK
3700/3770 is in Standby mode (the Power Indicator is amber), short press this button
to turn the system ON (the Power Indicator turns white).
The receiver goes to Standby mode automatically through the following:
• 30 minutes of inactivity in Operational mode
• Short press the power button on the front panel
• Short press the OFF button on the remote control or remote app
The receiver can be brought back to Operational mode through the following:
• Short press on the power button on the front panel
• Short press on the source button
• Audio signal from Bluetooth device (HK 3770 Only)
3. Play/Pause: Press this button to play or pause the audio stream.
4. Menu: Press his button to choose from different menu options.
5. Back: Press this button to go back to the previous menu.
6. Select previous: Press this button to select the previous file to play.
7. OK : This button is used to make selections within the on-screen menu system for
some source devices.
8. Select next: Press this button to play the next file.
9. Message Display:Variousmessages appearin this displayin responsetocommands.
In normal use, the Upper Line will display the current source and audio input (analog or
one of the digital audio inputs). The Lower Line displays the current speaker group (if
any are active) and the DSP mode. Other messages may appear for some sources, such
as The Bridge docking station and the tuner.
10. Tuning: Use these buttons to navigate the receiver’s menus. When the radio is the
active source, use these buttons to tune stations according to the settings of theTuning
Mode button.
11. Tuner Mode selector: This button toggles between manual (one frequency step
at a time) and automatic (seeks frequencies with acceptable signal strength) tuning
mode. It also toggles between stereo and mono modes when an FM station is tuned in.
12. Harman Volume: This button cycles the Harman Volume function between high,
low and off.
13. Bluetooth: The Bluetooth button is used to set the stereo receiver into Bluetooth
mode.You can pair system with Bluetooth-enabled devices using this button.
14. Source selector: Press these buttons to select the active source.
15. Volume Control:Turn this knob clockwise to raise the volume and anticlockwise to
lower the volume, which will be shown in decibels (dB) in the Message Display.
16. Phono input: This has a built-in preamp. You can only plug a record player into a
phono input to connect it to the amplifier.
Harman Kardon
HK 3770 Service Manual
Page 4 of 120

HK 3700/3770 HK 3700/3770 Receiver Rear Panel Connections
6
HK 3700/3770 Receiver Rear Panel Connections
Harman Kardon
HK 3770 Service Manual
Page 5 of 120

Remote Control Functions
7
HK 3700/3770
The front panel controls of the HK 3700/3770 stereo receiver includes the following:
1. Radio Antenna connector
2. Network Connector
3. Digital audio input connector(HK 3770 only)
4. IR and trigger connector
5. AC input connector
6. Signal GND
7. Phono
8. Analog Audio input connector
9. Recorder
10. Subwoofer connector
11. Speaker Connector
1. Radio Antenna connector: Connect the included AM and FM antennas to their
respective terminals for radio signal reception.
2. Network Connector: Connect to your home network using RJ45 connector.
3. Digital audio input connector (HK 3770 only): If your non-HDMI source devices
have digital outputs, connect them to the receiver’s digital audio connectors.
NOTE: Make only one type of digital connection (HDMI, optical or coaxial)
from each device.
4. IR in and trigger connector: When the IR remote receiver on the front panel of
the HK 3700/3770 receiver is blocked, connect an optional IR receiver to the IR Remote
Input jack for use with the remote control. The Remote IR Output may be connected to
the IR Remote Input of a compatible source device (or other product) to enable remote
control through the HK 3700/3770.When several source devices are used, connect them
in a“daisy chain”fashion.
Trigger Connector: Connect these outputs to a compatible trigger input on the
subwoofer connected to the Subwoofer Output immediately to the right of the Trigger
Output. Consult the owner’s manual for the subwoofer to set its trigger input correctly,
and the subwoofer will automatically turn ON or OFF when the HK 3700/3770 is turned
ON or OFF. In addition, the Trigger Outputs are used with the Subwoofer Link Switches
to conserve energy by powering off the subwoofer’s amplifier when it is not needed.
The SubwooferTrigger Outputs send a signal of 15 volts DC.
5. AC input connector: After you have made all other connections, plug the supplied
AC power cord into an unswitched wall outlet.
6. Signal GND: This is used to connect the ground wire of an analog player.This reduces
noise when an analog player is connected.
7. Phono in: Connect the outputs of your turntable to these jacks, and connect the
ground wire from the turntable to this Ground Connector to reduce system hum. Only
moving magnet (MM-type) cartridges are compatible with the Phono Inputs. If your
turntable is equipped with its own on board phono preamp, you may connect it to any
of the HK 3700/3770’s other audio inputs.
8. Analog audio input connector: Use the receiver’s Analog Audio Input/Output
connectors for source devices that don’t have HDMI or digital audio connectors. Use the
Video 2 Out and Tape Out connectors to connect to the audio inputs of a VCR and tape
deck.
9. Recorder:Two-channel analog audio signals, as well as composite video signals, are
normally available at the appropriate recording outputs.Thus, to make a recording, you
need only make sure to connect your audio or video recorder to the appropriate output
jacks. Insert blank media and make sure the recorder is turned on and recording while
the source is playing.
NOTE: Please make certain that you are aware of any copyright restrictions
on any material you record. Unauthorized duplication of copyrighted
materials is prohibited by federal law.
10. Subwoofer connector: If you have a powered subwoofer, connect these jacks to
the line-level inputs on the subwoofer.
11. Speaker connector: Use two-conductor speaker wire to connect each set of
terminals to the correct speaker. Observe the correct polarity (positive and negative
connections). Use the Speaker 1/2 Selectors on the front panel or remote to select either
or both pairs of speakers for playback.
Remote Control Functions
Harman Kardon
HK 3770 Service Manual
Page 6 of 120

HK 3700/3770 Remote Control Functions
8
The following remote control functions are available in the remote provided with the
HK 3700/3770 remote:
1. Power On/Off
2. Mute
3. External device direct remote control (programmable)
4. Stereo (to shift from external devices back to stereo receivers)
5. Source selection
6. Harman Volume
7. Menu access
8. Navigation pad
9. Tone control
10. Exit
11. Numeric keys
12. Volume control
13. Speaker 1/2 selection
14. Preset selection
15. Sleep
16. Dimmer
17. Preset scan
18. Auto preset
19. RDS function
20. Memory
21. External device control
Power ON and OFF buttons: Press these buttons to turn the stereo receiver ON and
OFF.
Mute: Press this button to mute or unmute the system.
Source selector button: Press one of these buttons to select a source device, which is
a component where a playback signal originates, e.g., DVD, CD or the tuner.This will also
turn ON the receiver and switch the remote to the codes that operate the source device.
Harman Volume (HK 3770 Only): This button cycles the Harman Volume function
between high, low and off. Harman volume is an advanced digital signal processing
technology to control playback volume. It evens out the volume level on everything
you watch, improving your listening experience. Once you choose the volume level,
Harman Volume does the rest. It helps you avoid volume increase from commercials,
volume differences when you change channels or switch sources. It helps you listen to
the perfect sound of the dialogs.
Menu: This button helps you navigate through the source’s setup menu.
Tone Control: Press this button to access the bass and treble controls. Use the OK button
to select an adjustment and use the Up/Down buttons to change the settings.
Exit: Use this key to go back from the source’s setup menu.
OK: This button is used to select items from the menu system.
Left/Right/Up/Down Buttons:These buttons are used to navigate the menu systems.
Numeric keys: Use these buttons to enter radio station frequencies when using the
tuner (after pressing the Direct button), or to select station presets.
9. Clear: Press this button to clear a radio station frequency you have entered.
Direct: Press this button before using the numeric keys to enter a radio station
frequency.
Volume Up/Down buttons: Press these buttons to increase or decrease the volume
level.
Speaker1/2:PresstheSpeaker1buttontoenable the HK 3700/3770 Speaker1outputs,
and press the Speaker 2 button to enable the Speaker 2 Outputs. You may enable or
disable both sets of speaker outputs simultaneously.This feature is a convenient way of
hearing audio in more than one room at a time, although the same source material will
be played through both sets of speakers.
CH/Tuner: Use this control to tune a radio station. Tap one end of the button briefly to
tune one frequency step at a time, or press and hold it to seek the next frequency with
an acceptably strong signal.
P-Scan: Press this button once to scan through the stations you have previously
programmed as presets. Each station will play for five seconds before the tuner skips to
the next preset station. Press the button second time to select the current station. If no
presets have been programmed, the 0 PRESET message will be displayed.
A-Preset: The Auto Preset feature enables you to automatically set presets for all
available FM radio stations in your area with a single button press. To start the process,
make sure that the FM tuner has been selected as the source. Press and hold this button.
The AUTO PRESET message will appear as the HK 3700/3770 tuner scans through all FM
stations with acceptable signal quality and programs them into the presets. If there are
fewer than 30 stations, the tuner will cycle through again, filling up the higher preset
slots with the same stations.The scan will stop when all 30 presets have been filled, or
after two scans through the FM band.
MEM: After you have tuned a particular radio station, press this button, then the
Numeric Keys, to save that station as a radio preset.
RDS: When listening to an FM radio station that broadcasts RDS information, this
button activates the various RDS functions.
Transport Control buttons: These buttons are used to control many source
components. When the remote is operating the receiver by default, these buttons will
control a Harman Kardon Blu-ray Disc player or DVD player.
Harman Kardon
HK 3770 Service Manual
Page 7 of 120

HK 3700/3770 Troubleshooting
14
Problems Solutions
Unit does not function when main Power button is turned ON • Make sure AC power cord is plugged into a live outlet
• Check to see whether outlet is switch-controlled
No sound from the receiver • Make certain that all input and speaker connections are secure.
• Press Mute Button
• Turn up Volume Control
• Press correct Source Selector
• Press Speaker 1 or Speaker 2 Button
• Unplug headphones
• Replace jumper pins or, if external amplifier is in use, make sure it is turned
ON
No sound from any speaker • Check speaker-wire connections for shorts at receiver and speaker ends
• Contact your local Harman Kardon service center
Unit does not respond to remote commands • Change remote batteries
• Make certain front-panel sensor is visible to remote or connect an optional
remote sensor
Intermittent buzzing in tuner • Move unit or antenna away from computers, fluorescent lights, motors or
other electrical appliances
No video image • Connect the source’s composite video output to the correct video input on
the HK 3700/3770
• Press the correct Source Selector on the HK 3700/3770
• Connect the HK 3700/3770’s Video Monitor Output to a composite video
input on your television or video display
• Consult the manual for your television for instructions on selecting the
correct video input
• It is not possible to view video while listening to the Phono, Tape/CDR or CD
sources or to the tuner
Audio sources sound distorted • Only plug a device into the Phono Inputs if it is a turntable with a moving-
magnet cartridge, or if it is a turntable with a moving-coil cartridge with a
phono preamp
• Do not use a turntable with any inputs other than the Phono Inputs, unless
it has a moving-magnet-type cartridge and includes a phono preamp
Troubleshooting
If your HK 3700/3770 receiver does not perform the way you think it should, check whether the problem is covered in this section before contacting your dealer or a
Harman/Kardon representative.
Harman Kardon
HK 3770 Service Manual
Page 8 of 120

Specifications
15
HK 3700/3770
Specifications
HK 3700 Stereo Receiver HK 3770 Stereo Receiver
Feature Description
GENERAL FEATURES
Output Power at 8Ώ 85W @ 8Ω/<0.07%THD 120W @ 8Ω/<0.07%THD
Amplification Type Class A/B Class A/B
Internet Radio Yes Yes
Ethernet Connectivity via RJ-45 Yes Yes
MP3/WMA File Play from USB with built in 48kHz/24bit DAC decoder with built in 96kHz/24bit DAC decoder
USB Upgrade Yes Yes
iPod/Phone/Pad/Touch Play from USB with built in 48kHz/24bit DAC decoder with built in 96kHz/24bit DAC decoder
DLNA 1.5 Certified (Audio Streaming Only) Yes Yes
Speaker Assign A/B Yes Yes
Key Components/Cost Factors
Audio DSP / HarmanVolume Yes Yes
DACs Mid Range Higher end
PSU SMPS SMPS
CONNECTIVITY
AUDIO INPUTS
iPod audio Yes with internal DAC Yes with internal DAC
Front USB Input Yes Yes
AM/FM Yes Yes
Analog Input on Rear 5 5
Analog Input on Front No No
DAB No No
Phono input Yes Yes
AUDIO OUTPUTS
Analog Outputs Yes x1 Yes x1
Subwoofer Outputs One One
DIGITAL INPUTS/OUTPUTS
USB Input 1 1
Digital Audio Inputs, Rear No 1 coax/2 optical
Harman Kardon
HK 3770 Service Manual
Page 9 of 120

HK 3700/3770 Specifications
16
HK 3700 Stereo Receiver HK 3770 Stereo Receiver
Feature Description
ETHERNET / USB /STREAMING FEATURES
Ethernet Connectivity via RJ-45 Yes Yes
Internet Radio Yes Yes
USB, MP3, WMA, AAC, WAV Yes Yes
AirPlay No No
DLNA 1.5 Certified (Audio Streaming Only) Yes Yes
Metdata to VFD Yes Yes
WIRELESS
WiFi 802.11 b/g/n No No
Bluetooth No Yes
Harman Kardon
HK 3770 Service Manual
Page 10 of 120

Harman Kardon
HK 3770 Service Manual
Page 11 of 120

Harman Kardon
HK 3770 Service Manual
Page 12 of 120

Harman Kardon
HK 3770 Service Manual
Page 13 of 120

AMPLIFIER SECTION BIAS ADJUSTMENT
Measurement condition
.No input signal or volume position is minium.
.Do not adjust at FM/AM.
Standard value
.Ideal current = 48mA (±7%)
.Ideal DC Voltage = 22.5mA (±7%)
( AMP PCB )
CN51 CN41
DC VOLTMETER : Connect to
CN51 ( L-CH), CN41 ( R-CH)
No. Channel Adjust for Adjust
1 Left 22.5mV(±7%) CN51
2 Right 22.5mV(±7%) CN41
VR203 VR204
Harman Kardon
HK 3770 Service Manual
Page 14 of 120

[ HK3700/3770 Reset Procedure ]
1. Standby mode.
2. Press the Tun mode key for a few seconds.
3. VFD will show as below.
4. Complete reset.
Harman Kardon
HK 3770 Service Manual
Page 15 of 120

[HK3700 Firmware Upgrade Instructions]
1. Copy the latest firmware files(*.fw and *.ve) to a USB stick's root directory.
2. Plug a USB stick into the front panel.
3. Power ON by using the remote control or the set button.
4. After 30 seconds, press 'STEREO' key and 1,7,1,8 + 'ok' buttons on R/C.
Followings will be shown on the VFD.
VFD 1st line : SYSTEM UPGRADE
VFD 2nd line : Searching..
5. After USB searching, Venice upgrade begins.
Followings will be shown on the VFD.
VFD 1st line : VENICE UPDATE
VFD 2nd line : [Updating %]
It takes about 6~8 minutes to upgrade the firmware.
Harman Kardon
HK 3770 Service Manual
Page 16 of 120

6. After Venice upgrade, MCU upgrade begins.
Followings will be shown on the VFD.
VFD 1st line : MCU UPDATE
VFD 2nd line : [Updating %]
It takes about 25~30 seconds to upgrade the firmware.
7. Completing MCU upgrade, Set will automatically reboots.
"UPGRADE SUCCESS" will be shown on the VFD.
Harman Kardon
HK 3770 Service Manual
Page 17 of 120

8. VFD will display followings after dispaying "UPGRADE SUCCESS".
VFD 1st line : FM 87.50 01
VFD 2nd line : 2 CH STEREO
Harman Kardon
HK 3770 Service Manual
Page 18 of 120

Harman Kardon HK 3770 Bill of Materials
Level Ref# Component Description REQ-Qty UM
1CHE154 CLAMPER , ARM 0,12 M
1CPG1A972H BOX , OUT CARTON HK3770 1EA
1CPS1A930 PAD , LEFT 1EA
1CPS2A931 PAD , RIGHT 1EA
1CQB1A907Z LABEL , BAR CODE AVR154 1EA
1CQB1A978 LABEL , BAR CODE(SET) 1EA
1CQXHK3770/230 INSTRUCTION MANUAL ASS'Y 1EA
0,2 CABR03PPB BATTERY , AAA 2PCS IN PACK 2EA
0,2 CARTHK3700 REMOTE CONTROLLER (HK37x0) 1EA
0,2 CJA2B144Z CORD , POWER (16A-250V) 1EA
0,2 CSA1A018Z FM 1 POLE ANT 1EA
0,2 CSA1A039Z ANT, AM LOOP(9.5uH/5T) 1EA
1CRE1A037 LOCKER 14 EA
0,2 CBN1A269B65 KNOB , VOLUME 1EA
0,2 CGL1A300 INDICATOR , VOLUME 1EA
0,2 CGR1A555B63 COVER , JACK AVR1510 1EA
0,2 CGWHK3770/230 FRONT PANEL ASS`Y 1EA
..3 CBT2A1064 KNOB , STANDBY 1EA
..3 CBT2A1065 KNOB , BACK 1EA
..3 CGB1A273Z BADGE , AVR3770 1EA
..3 CGB3A158Z BADGE , HARMAN/KARDON (FRONT) 1EA
..3 CGL1A265Y INDICATOR , POWER AVR155 1EA
..3 CGR1A538G5 ORNAMENT , RING 1EA
..3 CGU2A410A25F WINDOW , FIP HK3770 1EA
..3 CGW1A533RHVB63 PANEL , FRONT HK3770 1EA
..3 CGX1A476Z SHEET , VOLUME 1EA
..3 CMH3A215 HOLDER , LED 1EA
..3 CMZ1A145Z FILTER , FIP AVR1510 1EA
..3 COP12607B HK3770 FRONT PCB ASS'Y 1EA
....6 C109 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C121 CCUS1H151JAS CAP, CHIP(1608, 50V/150pF, C0G)_SAMSUNG 1EA
....6 C151 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C213 CCUS1H223KCS CAP, CHIP(1608, 50V/0.022uF, X7R)_SAMSUNG 1EA
....6 C214 CCUS1H223KCS CAP, CHIP(1608, 50V/0.022uF, X7R)_SAMSUNG 1EA
....6 C311 CCUS1H102KCS CAP, CHIP(1608, 50V/1000pF, X7R)_SAMSUNG 1EA
....6 C322 CCUS1H102KCS CAP, CHIP(1608, 50V/1000pF, X7R)_SAMSUNG 1EA
....6 C431 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C441 CCUS1H223KCS CAP, CHIP(1608, 50V/0.022uF, X7R)_SAMSUNG 1EA
....6 C442 CCUS1H223KCS CAP, CHIP(1608, 50V/0.022uF, X7R)_SAMSUNG 1EA
....6 C451 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C456 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C557 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C558 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C601 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C602 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C603 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C604 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C605 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C644 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C645 CCUS1H471JAS CAP, CHIP(1608, 50V/470pF, C0G)_SAMSUNG 1EA
....6 C646 CCUS1H471JAS CAP, CHIP(1608, 50V/470pF, C0G)_SAMSUNG 1EA
....6 C647 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C714 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C715 CCUS0J475KCS CAP, CHIP(1608, 6.3V/4.7uF, X5R)_SAMSUNG 1EA
....6 C732 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C751 CCUS1H222KCS CAP, CHIP(1608, 50V/2200pF, X7R)_SAMSUNG 1EA
....6 C752 CCUS1H102KCS CAP, CHIP(1608, 50V/1000pF, X7R)_SAMSUNG 1EA
....6 C753 CCUS1H102KCS CAP, CHIP(1608, 50V/1000pF, X7R)_SAMSUNG 1EA
....6 C754 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
Harman Kardon
HK 3770 Service Manual
Page 19 of 120

....6 C911 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C912 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C923 CCUS1H681JAS CAP, CHIP(1608, 50V/680pF, C0G)_SAMSUNG 1EA
....6 C924 CCUS1H681JAS CAP, CHIP(1608, 50V/680pF, C0G)_SAMSUNG 1EA
....6 C951 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 C952 CCUS1H104KCS CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG 1EA
....6 D643 CVD1SS355T DIODE , CHIP , SWITCHING 1EA
....6 D644 CVD1SS355T DIODE , CHIP , SWITCHING 1EA
....6 IC13 CVISN74ACT04DR I.C , HEX INVERTERS(SOIC/D-14P) 1EA
....6 IC91 HVTKTC812TB EOL item T.R , CHIP(TS6) 1EA
....6 IC92 HVTKTC812TB EOL item T.R , CHIP(TS6) 1EA
....6 L451 CLZ9Z014Z FERRITE CHIP BEAD(4516/60R) 1EA
....6 Q111 CVTRT1P144C T.R,RT1P144C(10K-47K) 1EA
....6 Q112 CVTRT1N144C T.R,RT1N144C(10K-47K) 1EA
....6 Q113 CVTRT1N144C T.R,RT1N144C(10K-47K) 1EA
....6 Q114 CVTRT1N144C T.R,RT1N144C(10K-47K) 1EA
....6 Q252 CVTRT1N144C T.R,RT1N144C(10K-47K) 1EA
....6 Q721 CVTRT1N144C T.R,RT1N144C(10K-47K) 1EA
....6 Q906 CVTRT1P144C T.R,RT1P144C(10K-47K) 1EA
....6 Q907 CVTRT1P144C T.R,RT1P144C(10K-47K) 1EA
....6 R101 CRJ10DJ331T RES, CHIP(1608/5%/330ohm) 1EA
....6 R102 CRJ10DJ681T RES, CHIP(1608/5%/680ohm) 1EA
....6 R104 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 1EA
....6 R108 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R109 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R110 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R111 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R112 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R113 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R114 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R122 CRJ10DJ100T RES, CHIP(1608/5%/10ohm) 1EA
....6 R151 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 1EA
....6 R201 CRJ10DJ181T RES, CHIP(1608/5%/180ohm) 1EA
....6 R202 CRJ10DJ181T RES, CHIP(1608/5%/180ohm) 1EA
....6 R203 CRJ10DJ181T RES, CHIP(1608/5%/180ohm) 1EA
....6 R211 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 1EA
....6 R213 CRJ10DJ272T RES, CHIP(1608/5%/2.7Kohm) 1EA
....6 R214 CRJ10DJ272T RES, CHIP(1608/5%/2.7Kohm) 1EA
....6 R251 CRJ10DJ222T RES, CHIP(1608/5%/2.2Kohm) 1EA
....6 R252 CRJ10DJ393T RES, CHIP(1608/5%/39Kohm) 1EA
....6 R312 CRJ10DF1001T RES, CHIP(1608/1%/1Kohm) 1EA
....6 R313 CRJ10DF1501T RES, CHIP(1608/1%/1.5Kohm) 1EA
....6 R314 CRJ10DF1801T RES, CHIP(1608/1%/1.8Kohm) 1EA
....6 R315 CRJ10DF2701T RES, CHIP(1608/1%/2.7Kohm) 1EA
....6 R316 CRJ10DF3301T RES, CHIP(1608/1%/3.3Kohm) 1EA
....6 R322 CRJ10DF1001T RES, CHIP(1608/1%/1Kohm) 1EA
....6 R323 CRJ10DF1501T RES, CHIP(1608/1%/1.5Kohm) 1EA
....6 R324 CRJ10DF1801T RES, CHIP(1608/1%/1.8Kohm) 1EA
....6 R325 CRJ10DF2701T RES, CHIP(1608/1%/2.7Kohm) 1EA
....6 R326 CRJ10DF3301T RES, CHIP(1608/1%/3.3Kohm) 1EA
....6 R327 CRJ10DF5601T RES, CHIP(1608/1%/5.6Kohm) 1EA
....6 R328 CRJ10DF5601T RES, CHIP(1608/1%/5.6Kohm) 1EA
....6 R402 CRJ14CJ4R7T RES, CHIP(3216/5%/4.7ohm) 1EA
....6 R404 CRJ14CJ4R7T RES, CHIP(3216/5%/4.7ohm) 1EA
....6 R431 CRJ10DJ100T RES, CHIP(1608/5%/10ohm) 1EA
....6 R432 CRJ10DJ100T RES, CHIP(1608/5%/10ohm) 1EA
....6 R451 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 1EA
....6 R452 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 1EA
....6 R453 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 1EA
....6 R454 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 1EA
....6 R455 CRJ14CJ101T RES, CHIP(3216/5%/100ohm) 1EA
....6 R456 CRJ14CJ101T RES, CHIP(3216/5%/100ohm) 1EA
Harman Kardon
HK 3770 Service Manual
Page 20 of 120