Harman AMX MST-701 User manual

QUICK START GUIDE
MST-701 7" Modero S Series Tabletop Touch Panel
Overview
The MST-701 7” Tabletop Touch Panel (FG2265-06) includes VoIP, brilliant 24-bit
color depth, PoE connectivity, USB and streaming video. The MST-701 also supports
Bluetooth keyboard and mouse via the optional MXA-BT Bluetooth Adapter.
Product Specif ications
Connector Locations
USB peripherals (mouse, keyboard, etc.) may be connected to the USB port on the rear
of the device. Updates to the device’s f irmware can also made via the USB port.
Power via Power Over Ethernet
Power for the MST-701 is supplied via Power Over Ethernet (PoE), utilizing an AMX-
certified, capacitive touch-compliant PoE injector such as the PS-POE-AT-TC High
Power PoE Injector (FG423-83) or other approved AMX PoE power source.
The incoming Ethernet cable should be connected to the RJ45 port on the panel.
Conf iguring and Programming
S Series touch panels are equipped with a Settings menu that provides the ability to set
and configure various features on the panels.
Note: Information on the Settings menu, panel configuration and programming is
provided in the Modero S Series Programming Guide, available at www.amx.com.
Accessing the Settings Menu
To access the Settings menu, press and hold the Sleep button on the top of the panel
for 3 seconds. This invokes an on-screen prompt to release the button to enter the main
Settings page (FIG. 3).
Accessing the Configuration Page
1. From the Settings menu, select Configuration.
If the Configuration page is password protected, this opens a password keypad.
2. Enter the panel password into the keypad (the default is 1988) and select OK to
access the page (FIG. 4).
• To reboot the panel, press and hold the text under the Reboot section for two
seconds.
• To shut down the panel, press and hold the text under the Shutdown section for
two seconds.
Setting the Panel’s Device Number and Device Name
In the Configuration page:
1. Press Panel to open the Panel Configuration page.
2. In the Device Name page, ensure that the Synchronize Device Names button is not
selected, and click it to deselect it if it is.
3. Press Device Number to open the Device Number keypad.
4. Enter a unique Device Number assignment for the panel and press OK.
5. Press the Device Name field to open the Device Name keypad.
6. Enter a unique Device Name assignment for the panel and press OK.
7. Click the arrow on the top left of the page once to return to the Configuration
page and twice to return to the Settings page.
FIG. 1 MST-701
MST-701 SPECIF ICATIONS
Dimensions (HWD) 4 1/2" x 7 3/8" x 3 3/16" (115 mm x 188 mm x 81 mm)
Weight 1.4 lbs (.635 Kg)
Power Consumption • Full-On: 13W
•Typical:7W
•Standby:4.5W
• Shutdown: 0.7W
• Start-Up Inrush Current: Not applicable due to PoE standard
External Power
Supply Required
Optimal performance requires use of one of the following AMX PoE
power supplies (not included):
• PS-POE-AF-TC, PoE Injector, 802.3AF Compliant (FG423-83)
• NXA-ENET8-2POE, Gigabit PoE Ethernet Switch (FG2178-63)
Certifications • FCC Part 15 Class B
• CE EN 55022, 55024, 60950-1
• IEC 60950-1
• C-Tick CISPR 22 Class B
• IC CISPR 22 Class B
• UL 60950-1
• VCCI CISPR 22 Class B
•RoHS
• WEEE
Environmental • Temperature (Operating): 32°F to 104°F (0°C to 40°C)
• Temperature (Storage): 4°F to 140°F (-20°C to 60°C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation:
On: 27.3 BTU/hr
Standby: 10.9 BTU/hr
Included
Accessories
• MXA-USB-C, USB Port Cover Kit (FG5968-18)
• Cat5e Ethernet Cable, Flat Black (ECA2265-10)
• UTP CAT.5E Snap In Coupler, Black (64-5968-01)
FIG. 2 MST-701 USB PORT LOCATION
USB Port
Sleep Button Microphone
USB Port
RJ-45 Port
Speaker
FIG. 3 SETTINGS MENU
FIG. 4 CONFIGURATION PAGE

© 2015 Harman. All rights reserved. Modero, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are registered trademarks of
HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective
companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax [phone]
AMX (UK) LTD, AMX by HARMAN - Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • [phone] • www.amx.com/eu/
93-2265-06 REV: H
Last Revised: 6/22/2015
Accessing the Connection & Networks Page
1. From the Settings menu, select Connection & Networks. If the page is password
protected, this opens a password keypad.
2. Enter the panel password into the keypad (the default is 1988) and select OK to
access the page (FIG. 5).
Conf iguring the Panel’s IP Address
The first step is to configure the panel’s communication parameters. This only
configures the panel to communicate with a network, and it is still necessary to tell the
panel with which Master it should be communicating.
Network Communication With a DHCP Address
In the Connection & Networks page:
1. Select Network Connection to open the Network Connection page (FIG. 6).
2. Toggle the DHCP/Static field until the choice cycles to DHCP. This action causes all
fields on the page (other than Host Name) to be disabled.
3. Select Host Name to open the Host Name keyboard. Enter the new host name and
click OK.
Setting Static IP Information
When using DHCP settings for a panel, the DHCP server will automatically populate
almost all of the Network Connections page fields, with the exception of Hostname.
When setting the panel for Static, however, this information must be entered manually.
To enter the network connection information:
1. In DHCP/Static, press the field until the entry reads “Static”. This enables all of
the editable Network Connections page fields.
2. Select the IP Address field to open the Wired IP Address keypad (FIG. 7).
3. Enter the server’s IP address and click OK.
4. Repeat this procedure with the other fields on the Network Connections page.
5. When finished, the new connection information will be visible in the Network
Connections page.
Connecting to a NetLinx Master
To establish the type of connection to make between the panel and NetLinx Master:
1. In the Connection & Networks page, select Master Connection to open the Master
Connection page (FIG. 8).
2. Press Mode to toggle through the available connection modes (Auto, URL or
Listen):
3. If you have enabled password security on your Master, you need to set the
username and password within the device.
a. Select Username to open the Master User keyboard.
b. Set your Username and select OK.
c. Select the Password to open the Master Password keyboard.
d. Set your Master Password and select OK.
e. Press the Back button twice to return to the Settings page.
Related Software and Additional Documentation (at www.amx.com)
• Programming the Modero S Series touch panels requires the use of the latest
versions of NetLinx Studio and TPDesign4, both available to download at
www.amx.com. Refer to the NetLinx Studio and TPDesign4 online help for
information.
• For additional information on the MST-701 panel, refer to the S-Series Touch
Panels MSD/T-1001, MSD/T-701 & MSD/T-431 Instruction Manual.
• For detailed information on the Settings menu as well programming information
and instructions on upgrading firmware, refer to the Modero S Series
Programming Guide.
FIG. 5 CONNECTION & NETWORKS PAGE
FIG. 6 NETWORK CONNECTION PAGE
FIG. 7 WIRED IP ADDRESS KEYBOARD
FIG. 8 MASTER CONNECTION PAGE
CONNECTION MODES
Mode Description Procedures
URL The device connects to the
target Master’s IP address
via a TCP connection.
1) Select URL in the Mode menu.
2) Enter the Master IP/URL, Master Port
Number, and Username/Password (if
required by the Master).
Press OK to save changes.
Listen This mode allows the panel
to “listen” for the Master’s
communication signals.
Note that in this mode, the
System Number and Master
IP/URL fields are read-only.
1) Select Listen in the Mode menu.
2) Confirm the panel’s IP address is on the
Master’s URL list (via NetLinx Studio).
3) Press OK to save changes.
Note: The Host Name can be used to locate the
panel on the Master (particularly useful for
DHCP connections where the IP address can
change).
Auto Use this mode when both
the panel and the NetLinx
Master are on the same
Subnet.
1) Select Auto in the Mode menu.
2) Enter the System Number and Username
and Password (if applicable).
3) Press OK to save changes.