Harrod HAN-003 User manual

View of Product
IMPORTANT PLEASE READ THE
ASSEMBLY INSTRUCTIONS
CAREFULLY BEFORE STARTING TO
ASSEMBLEYOUR GOALPOSTS.
Tools Required
2x 13mm Spanner
1x 19mm Spanner
2
1
3
4
Fittings
Page 1
5
INS047
Revision 0
05/11/15
Harrod UK Limited©
Pack Contents
HAN-003 Wheelaway Handball Posts
WAW Handball Fittings Pack (FPK222)
5. 8 x M8 Nut (BOL400)
6. 8 x M8x50mm Hex Bolt (BOL510)
7. 1 x Pack Synthetic Post Hooks (FBL-444)
(contains)
1. 2 x Handball Crossbar (FEQ400)
2. 2 x L/H Handball Upright & Frame (FEQ401)
3. 1 x Handball Backbar (FEQ402)
4. 2 x R/H Handball Upright & Frame (FEQ403)
Code:
Product:
HAN-003
Wheelaway Handball Posts
6
7

Code: INS047
Revision 0
05/11/15
Harrod UK Limited©
HAN-003
Product:
Assembly Instructions
1Lay all parts onto a smooth flat surface to avoid scratching the posts. Remove the pre-fitted M10x30mm Hex Bolts, in
the sideframes and connect the L/H (2) and R/H (4) Sideframes to the Crossbar (1). Secure with the M10 Bolts and
tighten with a 17mm Spanner.
Wheelaway Handball Posts
Fig. 1
2
4
1
Pre-fitted
bolts
2Attach the Top & Bottom Backbars (3) with two M8x50mm Hex Bolts (6) and two M8 Nuts (5), as shown in Fig 2.
Tighten with 13mm Spanners.
3
3
5
6
Page 2
Fig. 2

Assembly Instructions
INS047
Revision 0
05/11/15
Harrod UK Limited©
HAN-003
Wheelaway Handball Posts
Code:
Product:
3To fold the goal, remove the Top and Bottom Backbars and push the Sideframes in, as shown in Fig. 3
Fig. 3
4Once the goal has been folded the wheels will drop into position, allowing the goal to be easily moved.
Fig. 4
Page 3