Hasbro Lite Brite Flat Screen 06618 User manual

AGE 4+
06618
®
Thank you for purchasing this LITE-BRITE brand toy!
This set includes LITE-BRITE flat-screen console, over 200 pegs, 10 picture
sheets (8 classic, 2 free-form), and instructions.
Requires 3 “D” alkaline batteries (not included). Phillips screwdriver (not
included) required for battery installation.
© 2003 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
06618 P/N 6296800000
TTOOOORRDDEERRAANNDDRREEPPLLAACCEELLIIGGHHTTBBUULLBB
Order light bulb by contacting HASBRO at 1-800-327-8264. (Bulb is not
available in stores.)
Use a Phillips screwdriver to remove 2 screws from bulb unit. Remove unit from
toy. Turn unit over, remove screw from bulb cover and remove cover. Pull out
old light bulb and replace with new bulb. Refasten bulb cover and bulb unit.
LITEBRITE.COM
FOR NEW PRODUCTS AND OFFERS
LITEBRITE.COM
FOR NEW PRODUCTS AND OFFERS
Questions? Call: 1-800-327-8264
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 4 years.

TTOOIINNSSTTAALLLLBBAATTTTEERRIIEESS
Using Phillips screwdriver, loosen screws in battery compartment cover (screws
stay attached to cover). Remove cover. Insert 3 "D" alkaline batteries as indi-
cated. Replace cover and tighten screws.
TTOOCCRREEAATTEELLIITTEE--BBRRIITTEEPPIICCTTUURREESS
The LITE-BRITE Flat Screen toy comes with over 200 pegs and 10 design pic-
tures to make colorful, light-up creations!
1Tear the picture sheets along the perforated lines and remove.
2Place a picture sheet flat and straight on the peg screen. Position the sheet
so that the star on each corner is next to a corner on the peg screen. Push a
peg through the hole in each star to secure the picture to the screen.
3When creating a picture, follow the printed letters on the sheet to tell which
colored pegs to use (see chart). If you are making a free-form picture,
simply insert the pegs through the holes wherever you want for your own
unique designs.
4Insert the colored pegs through the paper and into the peg screen as far as
they will go.
5Press the button to make your creations shine! Each time you press the
button, the light will at first be bright, then fade out within 3 minutes to
conserve battery life.
CAUTION: TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly and always follow the toy and
battery manufacturers' instructions;
2. Do not mix old batteries and new batteries or alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries;
3. Always remove weak or dead batteries from the product.
LETTER COLORED PEG
ON PICTURE TO USE
RRED
BBLUE
OORANGE
WWHITE
GGREEN
YYELLOW
PPINK
VVIOLET
CCoolloorrCChhaarrtt
Press to light
up design!
Store pegs
here.
Insert peg