Hasbro Martian Matter Alien Maker 20574/20570 User manual

AGES 5+
20574/20570 Asst.
CONTENTS: Spaceship playset (7 pieces), 14 alien half-molds, plastic knife, roller,
tweezers, cutter, 3 two-ounce bottles of LUNAR LAVA™ gel (net wt. 6 . oz., 177 ml)
and 3 two-ounce cans of METEOR MUD™ compound (net wt. 6 oz., 170 g).
COMPOUND NET WT. 6 OZ. (170 g)
GEL NET WT. 6 FLUID OZ. (177 ml)
™
™
© 2007 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
U.S. Patent No. 6713624.
NOT A FOOD ITEM. NONTOXIC.
NOTICE TO PARENTS: CONTAINS WHEAT.
Questions? Call: 1-800-327-8264
P/N 6732380000
Stain Advisement: Note that LUNAR LAVA™ gel may stain some surfaces.
Adult supervision is recommended. Wash with soap and warm water.
Molded results vary depending on child’s age and level of skill.
Product and colors may vary.
Cleaning up METEOR MUD™ compound: If spilt, remove excess
compound, allow to dry, then scrape or vacuum deposits away. Always
put compound back in container after play. Store in a cool place. If
necessary, water may be added one drop at a time to restore softness.
Hatch
LUNAR LAVA
Pods
Cutter
METEOR MUD
Half-Molds
Hatch
LUNAR LAVA
Pods
Cutter
METEOR MUD
Half-Molds
RollerRoller
TweezersTweezers
Plastic KnifePlastic Knife

1Place drawer in lower half of spaceship...
2Place top half of spaceship on
bottom half of spaceship. 3Snap hatch onto spaceship.
4Place domes on top of pods. 5Slide out drawer and place
alien half-molds inside.
Place LUNAR LAVA™ bottles...
Assembly
...tweezers, roller, and
plastic knife in the
holders on spaceship.
(The METEOR MUD cans and cutter
can be stored inside the spaceship.)
(If they don’t all t in the drawer, you can
store them inside the spaceship by lifting
the top half and placing them inside.)
...and slide it inside.

1Open hatch and ll chamber with
METEOR MUD™ compound all the
way to the rim.
2Open drawer and remove alien half-
molds. Choose two half-molds and snap
them into the underside of the hatch.
3Close hatch and push it down until
it closes. (This presses the half-
molds into the METEOR MUD™.)
4Open hatch. The METEOR MUD™ now
has an impression of your alien in it. 5Fill impression with LUNAR LAVA™ gel
all the way to the top, but do not overll it.
(You can make over 90 dierent aliens
using dierent half-mold combinations!)
(You can use one color or combine the
colors to create a multi-colored alien.)
6Place some METEOR MUD™
on a at surface and roll it
out with the roller.
Press cutter into METEOR MUD
to cut out a disc.
Create Aliens
Head to
body...
Head to
head...
Body to
body...

7Place METEOR MUD™ compound
disc on top of lled alien
impression, and gently pat it down.
9After allowing LUNAR LAVA™
time to harden, remove
METEOR MUD™ disc...
• TIP: If you’d like to make
another alien while the
rst one is hardening,
use the plastic knife to
carefully remove the lled
METEOR MUD™ from the
chamber. Place o to the
side for 3-5 minutes.
...and lift alien out of the
METEOR MUD™ impression.
Use the plastic knife
to cut away any excess
LUNAR LAVA™ from alien.
Use your imagination to dream up more
adventures and experiments for your aliens!
• Put aliens in the pods so they can
“y” the spaceship.
• Dissect aliens with the plastic knife
and tweezers!
• Flatten them with the roller (really
fun when they have gooey guts!).
These aliens are not from this planet, so they cannot “live” long in
our atmosphere. When they are exposed to oxygen for too long, they
shrivel up and become hard and dry. They will“live”longer if you keep
them in the spaceship pods or an airtight container (not included).
Alien Activities
Atmosphere Alert
• TIP: For an alien with
gooey guts, remove alien
from METEOR MUD™
after 3 minutes. To create
a solid alien, leave it in
the METEOR MUD™ for
the full 5 minutes.
8Let alien sit for 3-5 minutes to give
LUNAR LAVA™ gel time to harden.
• NOTE: METEOR MUD™
is reusable! To make more
aliens, repeat steps 1–9.