Hasbro Blastin' Action Battle Station 3860 User manual

Blastin’Action
Battle Station
AGES 4+
3860
Includes:
Top Deck
Main Deck
Battle Bridge
Mast (2 pieces)
Crow’s Nest
Spreaders
Rigging Ladders (2)
Bowsprit (3 pieces)
Left Door
Right Door
Hatch
Ship’s Wheel
Front Rails (2)
Rear Rails (2)
Cannon (4 pieces)
Thank you for choosing this exciting Treasure Planet
toy! For best play value, read and follow
directions carefully
©Disney
®* and/or ™* & © 2002 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
3860 PN 6164600000
0-3
Not suitable for children under 36 months
due to small parts, choking hazard.
HASBRO.COM
FOR NEW PRODUCTS AND OFFERS
HASBRO.COM
FOR NEW PRODUCTS AND OFFERS
Questions? Call: 1-800-327-8264
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
Loading The Projectiles
Play
Instructions Adult assembly
required.
No tools needed.
Projectile Launcher (2)
Missiles (4)
Cannon Missile (1)
Pulley Blocks (4)
Flags (2)
Launchers Cannon
Load Projectile
Press to
Launch
Insert projectile into front of
launcher as shown.
Press top button to launch.
3. Press to
Launch
2. Pull
Thruster
1. Load Projectile
Swivels Up &
Down and
Rotates!
Insert cannon projectile into front
of launcher as shown.
Pull out thruster mechanism.
Thruster locks in place.
Press trigger to launch.

68
5
Assembly
2 3 4
1
Slide main deck and
top deck together as
shown. Snap in place
securely.
Mast base fits
into top deck.
Mast mid-section
fits into base.
Attach
spreaders and
crow’s nest
to mast.
Step Step Step Step
Step Step
Snap assembled cannon and
bow sprit into deck as shown.
Bow Sprit
Attach
battle
bridge to
top deck.
Snap bottoms
of rigging
ladders onto
back of top
deck. Ladder
tops snap
onto bottom
of crow’s nest.
Snap left and
right doors
and hatch
into main
deck as
shown.
Step
Pulleys hook onto ship’s
spreaders.
Attach front rails (2) and rear
rails (2) onto bridge as shown.
Press-fit projectile launchers
into battle bridge stations.
Cannon
7
Step
Press and turn muzzle to attach. Fit
“control arm” onto footplate. Slide
foot plate onto cannon base.
Cannon
Sub-Assembly
a
7
Step Bow Sprit
Sub-Assembly
b
Fit bow sprit
base onto
ship’s bow.
Press-fit
long piece
into base.
Slide “radar
sensor” onto
assembled unit.