Hasbro FurReal friends GOGO My Walking Pup Setup guide

TM
TM
Training
Guide
AGES 4+
70439
© 2003 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
U.S. Patent Pending
70439 P/N 6246800100
200206630INTI-02

Hair entanglement may result if child’s hair
comes in contact with moving parts of toy.
Adult supervision is required.
CAUTION:
Thank you for purchasing the FURREAL FRIENDS
GO GO MY WALKIN’ PUP toy, the family friend that
walks and plays like a REAL dog!
Requires 4 x 1.5V "C"/LR14 alkaline batteries
(not included). Phillips/cross head screwdriver
(not included) needed to insert batteries.
FURREAL FRIENDS GO GO MY WALKIN’ PUP is the
newest member to the FURREAL FRIENDS family!
She’s a lifelike, affectionate dog that comes to life
when you touch her! She responds to sounds and
will walk towards you when you call her!
She even barks, growls and whimpers just like a
REAL dog!
Be sure to take good care of GO GO MY WALKIN’
PUP by following the instructions in this booklet!
To begin playing with GO GO MY WALKIN’ PUP,
you must first install batteries.
MEET GO GO MY WALKIN’ PUP
GO GO MY WALKIN’ PUP loves to be petted and
played with! Before you begin playing with GO GO
MY WALKIN’ PUP, be sure to brush her hair
thoroughly to make her look pretty!
GO GO MY WALKIN’ PUP is just like a REAL dog in
many ways! She loves when you pet her, but most
of all, GO GO MY WALKIN’ PUP can recognize the
sound of your voice! If you talk to her or call her
name, she will cock her head to acknowledge that
she has heard you. Call her again and she will
begin to walk in the direction of your voice.
Periodically, she will stop and wait until she hears
your voice again. Keep talking to GO GO MY
WALKIN’ PUP and she will come to you! GO GO MY
WALKIN’ PUP listens to you best when you play with
her in a quiet environment.
If you would like to make GO GO MY WALKIN’ PUP
stay still, pet her forehead. Continue petting her
and she will not move towards your voice, because
she is happy while being petted!
1

CAUTION:
1. Always follow the instructions carefully. Use only
batteries specified and be sure to insert item
correctly by matching the + and – polarity
markings.
2. Do not mix old batteries and new batteries or
standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from
the product.
4. Remove batteries if product is not to be played
with for a long time.
5. Do not short circuit the supply terminals.
6. Should this product cause, or be affected by,
local electrical interference, move it away from
other electrical equipment. Reset (switching off
and back on again or removing and re-inserting
batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with
any other types of battery. Always remove from
the product before recharging.
Recharge batteries under adult supervision.
DO NOT RECHARGE OTHER TYPES OF BATTERIES.
23
Use a Phillips/cross head
screwdriver to loosen
screw in battery
compartment cover
(screw stays attached to
cover) on the bottom.
Insert 4 X 1.5V "C"/LR14
alkaline batteries.
Replace cover and
tighten screw.
CAUTION: TO AVOID BATTERY LEAKAGE
- Be sure to insert the batteries correctly and
always follow the toy and battery
manufacturers' instructions;
- Do not mix old batteries and new batteries or
alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries;
- Always remove weak or dead batteries from
the product.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference.
Batteries should be replaced by an adult.
TO INSTALL BATTERIES

GETTING STARTED
GO GO MY WALKIN’ PUP consists of the
following parts:
GO GO MY WALKIN’ PUP makes a variety of
realistic dog sounds and really:
- Barks
- Pants
- Whines
- Yawns
AND…Growls – but not in a scary way!
Left sensor
Microphone
45
Forehead
sensor
Right
sensor
Battery door
Back sensor

To wake her up, gently pet her forehead, back, left
or right side.
GO GO MY WALKIN’ PUP is just like a real dog in
many ways – she loves attention and to be petted.
If you pet her gently on her forehead and stroke
her back you will make her happy.
Note: GO GO MY WALKIN’ PUP will go to sleep
and shut down if she is not played with for a few
minutes. You can wake her up by petting her
forehead. Please remember to turn the ON/OFF
switch to the OFF position if she will not be played
for a while, to conserve battery life.
67
HOW TO PLAY WITH GO GO MY WALKIN’ PUP
To turn GO GO MY WALKIN’ PUP ON switch the
ON/OFF switch to ON.
Once turned on, she will bark, and then rock back
and forth while panting.

The following illustrations show how you can pet her:
89
Back Sensor
Left Side
Sensor
Forehead
Sensor
Right Side
Sensor

For more fun interaction with GO GO MY WALKIN’
PUP try these advanced tricks:
Grooming
To activate GO GO MY WALKIN’ PUP grooming
mode, pet one of her sides, followed by her head,
her back, her head, and her back once again. She
will stop all walking movement and will only turn
her head to respond to petting and sounds. When
grooming, please make sure she is on a stable,
solid surface. Now, comb and decorate her with
hair clips and ribbons.
*NOTE: Hair clips and ribbons are not included.
To get GO GO MY WALKIN’ PUP out of grooming
mode, press her forehead sensor or back sensor for
5 seconds.
Guarding
To activate Guard mode, press and hold down her
left side for 5 seconds. She will growl, which alerts
you that she is in Guard mode. She will not move,
but instead will turn towards any sounds and growl
gently. Guard mode will END once she is petted
and she will become happy and bark
enthusiastically.
Stay: To make her stay, hold her right side for 5
seconds. Then, as you walk away, speak three
commands to her. Upon the third and final
command, she will come to you.
Circular Parade: Pet either of her sides 5 times to
make her parade in circles!
Sleep
Sometimes she will need to rest, so if you stop
playing with her, she will fall asleep!
Do not play with GO GO MY WALKIN’ PUP on sand,
grass, or dirt covered surfaces.
10 11

FCC STATEMENT
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy, and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and the receiver.
- Consult the dealer or an experienced radio/TV
technician for help
CLEANING INSTRUCTIONS
To clean your dog’s fur, gently brush her with a
cloth or soft brush to loosen any dirt. Then use a
slightly damp cloth to remove stains.
- DO NOT PUT IN THE WASHING MACHINE
- DO NOT SUBMERGE IN WATER
- DO NOT GET WET EXCEPT A DAMP CLOTH ON
THE FUR
- TO PREVENT STAINING THE FUR, WIPE DIRT OFF
IMMEDIATELY
- IF THE DOG GETS WET, REMOVE THE BATTERIES AND
DRY THE FUR
- ONCE COMPLETELY DRY, REPLACE THE BATTERIES
- DO NOT USE DETERGENT OR STAIN REMOVERS ON
THE FUR
- Prevent spills of food and beverage on the unit.
- Do not throw or kick the product, and do not push
sharp objects through the speaker openings.
Clean only with
a piece of soft
dry cloth.
12 13
High temperature
will destroy the unit.
Do no leave unit in
direct sunlight.