Hasbro NERF HYPER EVOLVE-100 User manual

CLEARING A JAM RESET SWITCH
STORING YOUR BLASTER
1
NERF and HASBRO and all related trademarks and logos are trademarks of Hasbro, Inc.
© 2022 Hasbro. TM & ®denote U.S. Trademarks.
Hasbro, Pawtucket, RI 02861-1059 USA. US/CANADA TEL. [phone].
U.S. Pats. Pend.
F6111 PN00075960
Slide either access door open. Remove any
jammed rounds. Close door. If you cannot move the priming foregrip, pull down
and hold reset switch and push foregrip all the way
forward.
Do not store blaster primed and ready to fire.
Hey NERF Nation!
Join us online and keep up with
the latest and greatest NERF news!
21
EVOLVE-100™
2
TACTICAL RAILS
FILL LINE
Attach Nerf Hyper™ canisters to rails for additional firepower. (Canisters not included.)
Do not fill
beyond this
line.
Nerf Hyper rounds
are compatible
only with Nerf
Hyper blasters.
PRIMING FOREGRIP
READ ALL INSTRUCTIONS
COMPLETELY BEFORE USE.
Pull priming foregrip ALL
THE WAY back. Push priming
foregrip ALL THE WAY forward.
Best priming position: Keep
blaster level or tilt downward.
ACCESS DOORS
HOPPER BUTTON
HOPPER DOORS
TO AVOID EYE INJURY:
WARNING: Do not aim at eyes
or face.Use of eyewear required for players and
people within range. Use only official Hyper rounds.
Do not modify rounds or blaster. Ages 14 and up.
RESET
SWITCH
TACTICAL RAIL
14
+
HOPPER

Tilt front of blaster down. Press and hold hopper button to open hopper doors.
Fill hopper with rounds. DO NOT OVERFILL. Includes 70 rounds. Additional
rounds not included.
Make sure priming foregrip is pushed
all the way forward.
Release hopper button; doors will
autmatically close.
LOAD
FIRE
21 3
Unlock trigger. Hold front of blaster level or tilt it down. DO NOT TILT IT UP. Tilting blaster up when priming may not allow the
gravity-fed loading system to feed a round into the chamber. Pull priming foregrip all the way back and push it all
the way forward. Ready indicator will appear on side of blaster. Blaster is primed when ready indicator is visible.
Pull trigger to fire 1 round.
23
1
TRIGGER LOCK
On side of blaster, move trigger
lock down to lock trigger and up to
unlock. Always put the trigger lock
in locked position when blaster is
not in use and when storing blaster.
X100 MAXIMUM
READY
INDICATOR
1
2
TRIGGER