Hatco FLAV-R-SAVOR FSHC-6W1 User manual

ITEM#
FLAV-R-SAVOR®
PORTABLE HOLDING CABINETS
Models FSHC-6W1, FSHC-6W2 FSHC-7-1, FSHC-7-2
The Hatco Flav-R-Savor Portable
Holding Cabinet is capable of holding all
types of hot foods at optimum serving
temperatures. Thermostatically-controlled
heat and humidity allows you to prepare
food in advance of peak periods and
hold it for hours.
FLEXIBILITY
This easy to maneuver Portable Holding
Cabinet is made of stainless steel and
painted silver-gray top, sides, and back.
It features a digital temperature readout
and a large tempered glass or insulated
stainless steel door. Convenient tray
slides hold food pans on 3" (76 mm)
centers or 11/2" (38 mm) centers, and
can be removed easily for cleaning.
The Flav-R-Savor Portable Holding
Cabinet is perfect for serving counters,
buffet lines, drive-up windows, point-of-
service or preparation areas. FSHC-6W1
and -6W2 units are small enough to fit
under normal kitchen counters when
ordered with low profile casters.
Portable Holding Cabinets can be stacked
one on top of the other providing two
separate humidified temperature zones.
Ideal for schools, hospitals, concessions,
and cafeterias where backup food
storage is needed.
The Glo-Ray®Carving Station is available
to be placed on top of the Flav-R-Savor
Portable Holding Cabinet to create a
complete serving station for buffet lines.
QUALITY
The following features assure the finest
performance for years to come:
• Thermostatically-controlled heat and
humidity holds hot food at optimum
serving temperatures longer.
• Allows preparation of food in advance
of peak serving periods.
• Electrical components, controls, and
water reservoir are located at the top
for easy access.
• Adjustable humidity and temperature
controls, digital temperature readout,
insulated side walls, field reversible
glass doors, large swivel casters with
wheel locks, and 6' (1829 mm)
recessed cord and plug are standard.
METAL SHEATHED AIR HEATING ELEMENTS
GUARANTEED AGAINST BURNOUT AND BREAKAGE
FOR TWO YEARS.
Model FSHC-7-1 with
standard 4" (102 mm)
casters and accessory
food pans
FSHC-7-1/FSHC-7-1
stacked with accessory
hardware and food pans
ANSI/NSF 4
Model FSHC-6W1
with optional Designer
Color on side and top,
and accessory food pans
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [email protected]
Form No. FSHC Spec Sheet
Printed in U.S.A.
April 2007

ITEM#
253⁄8" (645 mm)
FRONT VIEW SIDE VIEW
321⁄8"
(816 mm)
Height with
Standard
Casters
293⁄4" (756 mm)
Height with
Optional Low
Profile Casters
Model FSHC-6W1 only
291⁄2" (749 mm)
Model FSHC-6W2 only
32" (813 mm)
PRODUCT SPECS
Portable Holding Cabinet
The humidity-controlled heated Portable Holding Cabinet shall
be a Flav-R-Savor®Model ...., rated at ....volts, and ....watts,
as manufactured by the Hatco Corporation, Milwaukee, WI
53234 U.S.A.
With 24/7 service (U.S. and Canada only), the cabinet shall
have ....door(s), tray slides (or holding rack), insulated side walls,
4" (102 mm) swivel casters with wheel locks or 4" (102 mm) legs,
and a 6' (1829 mm) cord and plug. It shall include a water
reservoir, humidity selector switch, temperature selector dial,
on-off switch, and indicating lights.
Accessories shall include Glo-Ray®Carving Station, sheet
pans, stacking hardware for multiple cabinets, bumper kit,
and wire shelf.
OPTIONS (NOT FOR RETROFIT)
❑ Designer Colors (Side Panels and Top): Warm Red, Black,
Gray Granite, White Granite, Navy Blue, Hunter Green
❑ Stainless Steel Side Panels, Back, and Top (No back panel on
two-door models)
❑ Stainless Steel Door (In lieu of Glass Door)
❑ 2" (51 mm) Low Profile Casters (In lieu of standard Casters)
(FSHC-6W1, -6W2 only)
❑ 4" (102 mm) Adjustable Legs (In lieu of standard Casters)
(FSHC-7-1, -7-2 only)
DIMENSIONS
FSHC-6W1: 25 3/8"W x 291/2"D x 321/8"H (645 x 749 x 816 mm).
FSHC-6W2: 25 3/8"W x 32"D x 321/8"H (645 x 813 x 816 mm).
FSHC-7-1: 22 3/4"W x 291/2"D x 351/8"H (578 x 749 x 892 mm)
on 4" (102 mm) Casters.
FSHC-7-2: 22 3/4"W x 32"D x 351/8"H (578 x 813 x 892 mm)
on 4" (102 mm) Casters.
Cabinet Opening: FSHC-6W1, -6W2 – 211/2"W x 19"H (546 x 483 mm).
FSHC-7-1, -7-2 – 181/2"W x 22"H (470 x 559 mm).
Top Surface: FSHC-6W1, -6W2 – 253/8"W x 257/8"D (645 x 657 mm).
FSHC-7-1, -7-2 – 225/8"W x 257/8"D (575 x 657 mm).
VOLTAGE
FSHC-7-1, -7-2: 120 volts, 60 Hz, 1697 watts, 14.1 amps
(uses NEMA 5-15P, NEMA 5-20P – Canada).
FSHC-6W1, -6W2: 120 volts, 60 Hz, 1697 watts, 14.1 amps
(uses NEMA 5-15P, NEMA 5-20P – Canada).
Export voltages available.
CORD LOCATION
FSHC-7-1, -7-2: Facing controls, left-hand side panel,
bottom right corner.
FSHC-6W1, -6W2: Back of unit, top right side.
PLUG CONFIGURATIONS
Pan Capacity
Models FSHC-6W1 and -6W2 include
six stainless steel angle slides which
will accommodate six 18" x 26"
(457 x 660 mm) sheet pans on 3"
(76 mm) centers; eleven 18" x 26"
(457 x 660 mm) sheet pans on 11/2"
(38 mm) centers, or twelve 12" x 20"
(305 x 508 mm) food pans (six 2/1
Gastronorm pans) on 3" (76 mm)
centers, or eleven 2/1 Gastronorm
pans on 11/2" (38 mm) centers) with
the purchase of additional pan slides.
Models FSHC-7-1 and -7-2 include seven stainless steel angle slides which
will accommodate seven 12" x 20" (305 x 508 mm) food pans or 18" x 26"
(457 x 660 mm) sheet pans on 3" (76 mm) centers, or fifteen 18" x 26"
(457 x 660 mm) sheet pans on 11/2" (38 mm) centers with purchase of
extra angle slides.
FLAV-R-SAVOR®
PORTABLE HOLDING CABINETS
Models FSHC-6W1, FSHC-6W2 FSHC-7-1, FSHC-7-2
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon (GPG)
(.75 grains of hardness per liter) must be treated and softened
before being used. Water containing over 3.0 GPG (.75 GPL) will
decrease the efficiency and reduce the operating life of the unit.
Note: Product failure caused by liming or sediment buildup is
not covered under warranty.
❑
6" (152 mm) Stainless Steel Legs (In lieu of standard Casters)
(FSHC-7-1, -7-2 only)
❑ Audible Low-Water Alarm (FSHC-7-1, -2 only)
ACCESSORIES
❑ Stacking Hardware
❑ Bumper Kit
❑ Extra Pan Slides
❑ Wire Shelf (FSHC-7-1, -7-2 only)
❑ Sheet Pans – Full and Half-size
❑ Glo-Ray
®
Carving Station
Model FSHC-6W1, -6W2
223⁄4" (578 mm)
Model FSHC-7-1 only
291⁄2" (749 mm)
323⁄4" (832 mm) with
Optional 2" (51 mm)
Low Profile Casters
351⁄8" (892 mm) with
Standard 4" (102 mm)
Heavy-Duty Casters
34" (864 mm) with
Optional 4" (102 mm) Legs
36" (915 mm) with
Optional 6" (152 mm) Legs
Model FSHC-7-2 only
32" (813 mm)
FRONT VIEW SIDE VIEW
Model FSHC-7-1, -7-2
SPECIFICATIONS
Model Type Rack Style Shipping Weight
FSHC-6W1 1 Door Adjustable Angle Slides•175 lbs. (79 kg)
FSHC-6W2†2 Door Adjustable Angle Slides•179 lbs. (81 kg)
FSHC-7-1 1 Door Adjustable Angle Slides* 168 lbs. (76 kg)
FSHC-7-2†2 Door Adjustable Angle Slides* 172 lbs. (78 kg)
* 7 slides on each side. Sheet Pans not included.
†Two-door pass-through single cabinet, not two units stacked.
•6 slides on each side. Sheet Pans not included.
or 12" (305 mm)
PANS
18" (457 mm) PANS
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [email protected]
Printed in U.S.A.
Form No. FSHC Spec Sheet April 2007
CEE 7/7 SchukoNEMA 5-20PNEMA 5-15P BS-1363