Hawking HSB2 User manual

LIMITED WARRANTY
Hawking Technology guarantees that every HSB2 WiFi Signal Boosteris free
from physical defects in material and workmanship under normal use for two
(2) years from the date of purchase. If the product proves defective during this
two-year warranty period, call Hawking Customer Service in order to obtain a
Return Authorization number. Warranty is for repair or replacement only.
Hawking Technology does not issue any refunds. BE SURE TO HAVE YOUR
PROOF OF PURCHASE. RETURN REQUESTS CAN NOT BE PROCESSED
WITHOUT PROOF OF PURCHASE. When returning a product, mark the
Return Authorization number clearly on the outside of the package and include
your original proof of purchase.
IN NO EVEN SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE PRICE PAID
FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS
ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION.
Hawking Technology makes no warranty or representation, expressed, implied
or statutory, with respect to its products or the contents or use of this
documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular purpose.
Hawking Technology reserves the right to revise or updates its products,
software, or documentation without obligation to notify any individual or entity.
Please direct all inquiries to:[email protected]
Trademarks & Copyright
All brands and product names are trademarks of their respective companies.
No part of this publication may be reproduced in any form or by any means or
used to make any derivative (such as translation, transformation or adaptation)
without the express written consent of the manufacturer as stipulated by the
United States Copyright Act of 1976.

Warning Statement:
Federal Communication
Commission Interference Statement
Federal Communications
Commission (FCC) Requirements,
Part 15
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution:
FCC RF Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body. Unauthorized antenna, modification, or
attachments could damage the transmitter and may violate FCC regulations.
Regulatory information/Disclaimers:
Any changes or modifications (including the antennas) made to this device that
are not expressly approved by the manufacturer may void the user's authority to
operate the equipment.

Network/Operating Range:
IEEE 802.11b WLAN Standard
IEEE 802.11g WLAN Standard
2400 -2500 MHz
Frequency Response: +/-1 dB
Output Power: Max: 27dBm)
Input Power:
8-18 dBm Max.
Receiver Gain: 10-13 dBm, 12 dBm Typical
Noise Figure: 3.5 dB typical
Connectors:
Input: Reverse SMA Jack
Antenna: Reverse SMA Jack
Connector Cables: RP-SMA
Power: External Power Adapter
DC Surge Protection: Available
Cable Length: 75 cm
SYSTEM REQUIREMENTS:
-802.11b or 802.11g Wireless Network
-Certified 802.11b/g Wireless PCI Network Adapter with a Removable Antenna.
(HWP54G)

Ethernet
A networking standard using cables (Category 5) to create a network.
Network Adapter -Also known as a NIC (Network Interface Card). Used to provide PC’s or laptops with an
Ethernet port or wireless access to the network.
Broadband Modem -A device that allows broadband connection to the internet. Broadband connections
include speeds faster than 56k (dial up modem speed). The two most common types of Broadband
connections are DSL and Cable. Cable modem relies on the bandwidth of cable television lines while DSL
modems rely on the telephone lines operating at DSL speeds.
Router -A device used to share internet access from one user to multiple users. By taking one IP address
(Addresses used by ISP’s to assign broadband services to your computer) the Router distributes the
services of your broadband access among multiple users and IP’s.
Wireless
Wireless Device –Any WiFi device (802.11b/g) that communicates wirelessly using the IEEE802.11
wireless standard. These devices can range from wireless access points to wireless routers to wireless PCI
client cards.
IEEE 802.11 –Wireless Network Specifications
•802.11 -- applies to wireless LANs (Networks) and provides 1 or 2 Mbps transmission in the 2.4
GHz band using either frequency hopping spread spectrum (FHSS) or direct sequence spread
spectrum (DSSS).
•802.11b(also referred to as802.11 High Rate or Wi-Fi) -- an extension to 802.11 that applies to
wireless LANs and provides 11 Mbps transmission (with a fallback to 5.5, 2 and 1 Mbps) in the 2.4
GHz band. 802.11b uses only DSSS. 802.11b was a 1999 ratification to the original 802.11
standard, allowing wireless functionality comparable to Ethernet.
•802.11g-- applies to wireless LANs and provides 54 Mbps in the 2.4 GHz band. Backwards
compatible with IEEE 802.11b products.
Hi-Gain WiFi Antenna
High powered antenna to increase the distance of your WiFi device.
SMA Connector –The standard antenna connector for WiFi devices. This is the most popular connector
and comes standard with all Hawking Technologies equipment.
TNC Connector –A type of antenna connector used by few wireless networking equipment manufacturers.
dBi (decibel) -A unit of measurement used to determine the gain level of wireless antennas.
mW (MilliWatt) -A unit of measurement used to determine the power level of wireless devices.