Hawking HSB2 User manual

802.11b/g WiFi
Signal Booster
HSB2
Boost Your Wireless Experience Up To 6x!!
The Hawking Technologies Wireless Signal Booster, for 802.11b/g WiFi networks, boosts the signal and performance of your
wireless networks. While the average power output of a standard wireless device is rated at under 100mW, the Hawking
HSB2 is capable of boosting power output to 500mW!!! The Hawking Wireless Signal Booster replaces your standard antenna
and is the perfect solution for covering large areas in multiple environments. Whether your application calls for extending
your wireless signals to an extra loft in your house or an extra ballroom in a hotel, the Hawking Signal Booster has you
covered. The unique Adjustable Power Settings feature of the Signal Booster lets you control the range and power output
(100mW to 500mW) of your wireless network for security purposes and specific applications where you wish to only cover a
certain area.
Features
Easy Plug and Play Installation, No Software Necessary
Works with Wireless 802.11b and 802.11g Standards
Increase both, Transmiting and Recieving Power
Instantly extend the range of your Wireless b/g network
Adjustable Power Settings for Specific Applications and Range Perimeters
Most Powerful Home/Office Wireless Signal Booster on the Market
System Requirements:
Wireless b/g Network
HSB2
Adjustable WiFi Signal Booster
PACKAGE CONTENTS:
One Adjustable WiFi Signal Booster
OneDipoleAntenna
One Connector Cable
(RP-SMA to RP-SMA)
Wall Mounting Kit
Easy to follow Quick Installation Guide

HSB2
Step 1 - Remove Original Antenna
Unscrew the antenna currently attached to your wireless product.
Step 2 - Connect the HSB2 Signal Booster
Use the included SMA-to-SMA cable to connect the Signal Booster.
Step 3 - Adjust Power and Plug In
Adjust the power setting on the Signal Booster and plug in the AC Adapter.
HSB2
Adjustable WiFi
Signal Booster
Network Specifications:
EEE 802.11b WLAN Standard
IEEE 802.11g WLAN Standard
Operating Frequency: 2400 - 2500 MHz
Transmit Gain: up to 27 dBm
Frequency Response: +/- 1 dB
Output Power: 100/200/500mW
Input Power: 8dBm min; 18dBm max
Receiver Gain: 10-13 dBm, 12 dBm Typical
Noise Figure: 3.5 dB typical
Connectors:
Input: Reverse SMA Jack
Antenna: Reverse SMA Jack
Connector Cables: RP-SMA
Power: External Power Adapter (12V, 1.25A)
DC Surge Protection: Available
Cable Length: 1 Meter
Certifications: FCC, CE
SYSTEM REQUIREMENTS:
802.11b or 802.11g Wireless Network
Certified 802.11b/g Wireless PCI Network Adapter
with a Removable Antenna. (HWP54G)
802.11b/g WiFi Signal Booster
(c)2005 Hawking Technologies. All Rights Reserved.
RELATED PRODUCTS:
HWP54G Hi-Speed Wireless-G PCI Card
HSB1-AP Hi-Gain WiFi Signal Booster + Wireless-G
Access Point / Bridge Kit
HAI15SC Hi-Gain 15dBi Corner Antenna
HAI6SIP Hi-Gain 6dBi Omni-Directional Antenna
FEATURES BENEFITS
Works with 802.11b & 802.11g WiFi Networks Complies with wireless standards
Adjustable Power Output Settings Boost your network range up to 600%
Plug and Play Installation Fast and easy no-hassle setup
PRODUCT VIEW: