Hawking PN108ES User manual

PN108ES
Get Connected With Hawking
 Complies with IEEE 802.3 Ethernet and 802.3u
Fast Ethernet standards.
 8 RJ-45 10/100 Mbps Auto-sensing ports
 Auto-Sensing Crossover Ports (Auto MDI/MDI-X)
 Supports “Store and Forward” switching
architecture with low latency.
 Supports full duplex transmission mode.
 Total of 8k MAC address
 Less than 18us for short packet delay and less
than 30u for long packet delay.
 Filtering and forwarding rate of 148,800 packets
per second per port.
 Five comprehensive LEDs per port
 Total bandwidth up to 1.6Gbps.
Intuitive Networking from Hawking
This Compact Switch from Hawking is the ideal Switch
solution for the Workgroup user who needs high
performance and seamless migration between 10BaseT
and 100BaseTX network speeds.
The PN108ES provides 8 auto-sensing RJ-45 10Base-
T/100Base-TX ports to increase the performance of your
network by bringing full Ethernet bandwidth to individual
workgroups or straight to your desktop, which will
eliminate the need to share the bandwidth of a single
network. It is also capable of connecting 10M, 100Mbps,
half and full duplex simultaneously. The PN108ES
provides a full wire-rate 10/100Mbps Switch port for
greater network performance. In addition, all ports are
Auto-sense Crossover ports for easy connection to other
Switches or Hubs for network expansion.
Furthermore, this full-featured Switch offers the same
10/100Mbps performance as full-size models, but in a
compact and efficient size and the performance and
hardware are guaranteed to be compatible with other
Switches, Hubs and Adapters
Switching Technology
Switching is a cost-effective way of increasing the total
network capacity available to users on a local area
network. A switch increases capacity and decreases
network loading by dividing a local area network into
different segments, which don’t compete with each other
for network transmission capacity.
The switch acts as a high-speed selective bridge between
the individual segments. The switch, without interfering
with any other segments, automatically forwards traffic
that needs to go from one segment to another. By doing
this the total network capacity is multiplied, while still
maintaining the same network cabling and adapter cards.
For Fast Ethernet networks, a switch is an effective way of
eliminating problems of chaining hubs beyond the “two-
repeater limit.” A switch can be used to split parts of the
network into different collision domains, making it possible
to expand your Fast Ethernet network beyond the 205-
meter network diameter limit for 100BASE-TX networks.
Switches supporting both traditional 10Mbps Ethernet and
100Mbps Fast Ethernet are also ideal for bridging
between existing 10Mbps networks and new 100Mbps
networks.

Package Contents:
 One 10/100 Auto-Sensing Switch
 One AC Power Adapter
 Easy to follow Owner’s Manual
Systems Requirement:
 IEEE 802.3 10BaseT Ethernet or IEEE
802.3u 100BaseTX Fast Ethernet
Network Operations Systems
Support:
Microsoft Windows
95/98/2000//NT/ME/XP and more!
Ready, Network & Go!
It's easy to set up, it's easy to use, and
everyone can use it. It only takes one
step!
Step 1 – Connect it
Connect the PN108ES to your network
using standard RJ45 cabling and you are
networked!
It's that easy!
Copyright Hawking Technologies, Inc. 2002. All rights
reserved .All trademarks herein are the property of their
respective owners
Network Diagram
Features Benefits
Plug and Play
Ethernet and
Fast Ethernet
Switch
Easily migrates
between 10Mbps and
100Mbps
10/100 Auto-
Sensing Force
full duplex
Connect 10M,
100Mbps, half and full
duplex simultaneously
Auto-Sensing
Crossover Ports
Easy expansion of
your network without
worrying about cable
types
IEEE 802.3 &
IEEE 802.3u
compliant
Guaranteed Switch
performance and
hardware compatibility
with other switches,
hubs and adapters
8 Switch Ports (8
RJ-45
connectors)
Provides full wire-rate
10/100Mbps Switch
port for greater
network performance
Hawking Technologies, INC.
6A Faraday, Irvine, California, USA
Sales: [phone], [phone]
Fax: [phone]
Email: [email protected]
Tech Support: [phone]
Email: T[email protected]
URL: www.hawkingtech.com
Specification:
 IEEE 802.3 10BaseT, IEEE 802.3u
100BaseTX, IEEE 802.3x standard
 8 RJ45 10/100 Auto-negotiation switch
ports
 Full wire 148,880 pps forwarding rate
 Total bandwidth 1.6Gbps
 All ports are Auto MDI/MDI-X
 8K Mac address entries support
 110 or 220V External power supply
 FCC Class B, CE, VCCI B
 UL 1950, CSA 22.2 No 950, IEC 950,
TUV EN60950
Order Information:
PN105ES 5-Port 10/100M Mini Switch (Plastic)
PN108ES 8-Port 10/100M Mini Switch (Plastic)
PN505ES 5-Port 10/100M Mini Switch (Metal)
PN818ES 8-Port 10/100M Mini Switch (Metal)
PN236ES 16-Port 10/100M Switch (Plastic)
PN636ES 16-Port 10/100M Rack Mount Switch
PN824ES 24-Port 10/100M Rack Mount Switch
PN1600ES 16-Port 10/100M RM Switch, Fiber Option
PN2400ES 24-Port 10/100M RM Switch, Fiber Option
PN1616ES 16-Port 10/100M VLAN Switch