Haworth Aloha Active User manual

Pneumatic Height Adjustment
Pneumatic height adjustment is used to adjust the
seat to fit different user heights. (1) Pull the lever up
and lift the body out of the chair to raise the seat. To
lower the seat, remain seated and pull the lever up.
1
Seat Depth Adjustment
Seat depth adjustment moves the seat pan to
accommodate different leg lengths. Pull out and
slide the seat pan front to back.
2
Back Lock
Back stop allows users to lock the back of chair at
upright position for task application (1) push down
on the lever to activate the back lock. (2) Pull up on
the lever to release the back stop.
3
Page: 1 of 2
16.7”
(min.)
(425mm)
21.4”
(max.)
(545mm)
2.2”
(55mm)
Aloha Active
User Guide

Arms
(1) Arm height adjustment raises and lowers the arms
to keep the users shoulder in a neutral posture. To
change the height of the armrest, pull up on the lever
and slide the armrest up or down.
(2) Armrest side-to-side adjustment accommodates
users with various shoulder width. Grasp the armrest
cap and slide it side-to-side as needed.
(3) Armrest front-to-back adjustment allows users to
get closer to their work surface while maintaining
effective use of the backrest. Grasp the armrest and
slide it forward or backward as needed.
(4) Armrest pivot allows the user to have proper
support of the forearm when mousing or keying. To
change the angle of the armrest, grasp the armrest
cap and rotate the front of the armrest toward or away
from the body.
5
Lumbar Adjustment
Lumbar height adjustment allows the user to position
the lumbar pad in the lumbar curve "the small" of the
user's back. Pull up on the handles to raise the lumbar
pad; push down to lower it. Lumbar support helps
maintain the lumbar curvature (lordosis) in the spine
of the lower back when the user is seated.
4
Page: 2 of 2