Haworth Aloha Easy User manual

Pneumatic Height Adjustment
Pneumatic height adjustment is used to adjust the
seat to fit different user heights. (1) Pull the lever up
and lift the body out of the chair to raise the seat. To
lower the seat, remain seated and pull the lever up.
1
Seat Depth Adjustment
Seat depth adjustment moves the seat pan to
accommodate different leg lengths. Pull out and
slide the seat pan front to back.
2
Back Lock
Back stop allows users to lock the back of chair at
upright position for task application (1) Push the
lever inward to activate the back lock. (2) Pull the
lever outward to release the back stop.
3
Page: 1 of 2
21.4”
(max.)
(545mm) 16.7”
(min.)
(425mm)
2”
(50mm)
Aloha Easy-Upholstered Back
User Guide

Arms
Arm height adjustment raises and lowers the arms to
keep the users shoulder in a neutral posture. To
change the height of the armrest, pull up on the lever
and slide the armrest up or down.
5
Tilt Tension Control
Tilt tension adjusts the force necessary for a user to
recline in the chair. Turn the knob clockwise to loosen
the tension and counter-clockwise to tighten the
tension. Once the tension has reached its maximum in
either direction, do not force the knob further.
6
Back Height Adjustment
Back of chair allows user to adjust the back height as
per curvature of lumbar. (1) Lift the back to raise the
height of back as per requirement (2) Slightly up the
back to remove lock and can lower down back for
main position.
4
Page: 2 of 2