Haworth Jive User manual

Jive Desk with C-Leg Base
For assembly assistance, visit Haworth.com, or call: 1-800-426-8562, or email [email protected]
Jive
Assembly Instructions
Congratulations on
your purchase of a
new Jive table!
Ready to create a dedicated workspace just for you?
We know you want to get up and running as soon as possible, but
before you dive right into setting up your table, be sure to:
1. Grab a friend to help you with the lifting. They can also help you
hold parts in place during assembly to make things a little easier.
2. Make sure you have all your parts and hardware, and gather the
necessary tools and safety equipment.
3. Follow all the steps and level your table before using it.
That’s it! Once you’ve got your table assembled and leveled, you’ll be
ready to get down to business with a fresh, new space that’s
dedicated to helping you stay productive.

#2 13mm
A
B
C
E
D
S-59
S-66
S197
Tools Required
Scale 1 : 1
0 11/2
1/4 1/4
Jive Desk with C-Leg Base Assembly Instructions
E.C.O. No 245-691 Part No 6100-0169 Rev 1 Page 2 of 6
Customer Service: 1-800-426-8562
(S-66) #12 x 1” Pan Head Screw
(S197) 3/8” Hex Nut
(S-59) 3/8” x 1-1/2” Hex Head Bolt
Optional: For caster
installation only.
Assembly Overview
9/16”
9/16”
Socket
Wobble
Extension
30D x 48W 30D x 60W
24D x 60W
24D x 48W

(A) Worksurface (B) Columns
(C) Front Feet (Long) (D) Column Washers - Qty. 4
Customer Service 800 426 8562 E.C.O. No 245-691 Part No 6100-0169 Rev 1 Page 3 of 6
(E) Back Feet (Short)
(S-59) Hex Head Bolts - Qty. 4
(S197) Hex Nuts - Qty. 4
(S-66) Pan Head Screws - Qty. 16

B
B
E
D
S-59
C
(S197) 3/8” Hex Nut
(S-59) 3/8” x 1-1/2” Hex Head Bolt
Attach back foot (E) to column (B) as shown; repeat for second column
Attach front foot (C) to column (B) as shown; repeat for second column
Customer Service 800 426 8562 E.C.O. No 245-691 Part No 6100-0169 Rev 1 Page 4 of 6
1
2
2 Qty.
2 Qty.
(S197) 3/8” Hex Nut
(S-59) 3/8” x 1-1/2” Hex Head Bolt
2 Qty.
2 Qty.
S197
S197
D
S-59

B
A
B1
F
(S-66) #12 x 1” Pan Head Screw
Attach columns (B) to worksurface (A) as shown
Customer Service 800 426 8562 E.C.O. No 245-691 Part No 6100-0169 Rev 1 Page 5 of 6
3
16 Qty.
CASTER INSTALLATION - OPTIONAL
NOTE: Casters (F) are optional
and ordered separately.
45
Remove foot pads (B1) as shown
Insert casters (F) and tighten with wrench as
shown
NON-LOCKING
13mm
Wrench
LOCKING
(SIDE VIEW)
FRONT

Customer Service 800 426 8562 E.C.O. No 245-691 Part No 6100-0169 Rev 1 Page 6 of 6
With a helper, flip table onto its feet
Level table as shown
6
7
FLIP TABLE
ONTO FEET