Haworth Zody User manual

Getting to know Zody®
Zodey-iso-01

Getting to know Zody®
Zodey-General Specs & Adjustability-01
Balanced 3-Point Tilt
Seat Height
5"
21"16"
Tilt Tension Control
(+) Tension (-)
(-)
(+)
Pneumatic Height Adjustment
Pneumatic height adjustment is used to adjust the seat to t
different user heights. (1) Pull the lever up and lift the body out of
the chair to raise the seat. To lower the seat, remain seated and pull
the lever up.
Seat Depth Adjustment
Seat depth adjustment moves the seat pan to
accommodate different leg lengths. Pull out and up on the
lever at a 45 degree angle, and slide the seat pan front to
back.
45°
Front View
Detail(s)
Side View Detail
3"
Seat Depth
Adjustment
5”
16” 21”
1

Getting to know Zody®
Zodey-General Specs & Adjustability-01
Balanced 3-Point Tilt
Seat Height
5"
21"16"
Tilt Tension Control
(+) Tension (-)
(-)
(+)
Zodey-General Specs & Adjustability-03
Arm Height
4"
Tilt with Back Stop (6 Positions)
Forward Tilt Back Stop/Forward Tilt
Tilt Tension Control
Tilt tension adjusts the force necessary for a user to recline
in the chair. Turn the crank forward (clockwise) to tighten
the tension and backward (counter-clockwise) to loosen
the tension. Once the tension has reached its maximum in
either direction, do not force the crank further.
Back Stop
Back stop allows users the choice of selecting an upright
position or limiting the amount of recline. (1) Recline to
the desired stopping position and (2) push down on the
lever to activate the back stop. (3) Pull up on the lever to
release the back stop.
1
3
2
Activate
Release

Getting to know Zody®
PAL®Back System & Lumbar
Adjustment
Lumbar height adjustment allows the user to position the
lumbar pad in the lumbar curve (the small_ of the users back.
Pull up on the handles to raise the lumbar pad; push down to
lower it.
Lumbar support helps maintain the lumbar curvature (lordosis)
in the spine of the lower back when the user is seated. Rotate
the handles up to increase the amount of support and down to
decrease the amount of support. Each handle can be rotated
independently.
Zodey-General Specs & Adjustability-02
Seat Depth
4D-Arm Adjustment
3"
Upper Back Torsional Movement
PAL Back System
1
2
PAL® Back System:
*Optional lumbar support with
patended asymmetrical adjustment,
providing low-back support.
*Passive pelvic support,
Provides low-back support.
Zodey-General Specs & Adjustability-03
Arm Height
4"
Tilt with Back Stop (6 Positions)
Forward Tilt Back Stop/Forward Tilt
Forward Tilt
Forward tilt allows users to sit forward in the chair during
task-intensive work. (1) To activate, push down on the for-
ward tilt lever, (2) recline and (3) then lean forward; pull
up and recline to release.
1
2
3
Activate
Release

Getting to know Zody®
Zodey-General Specs & Adjustability-02
Seat Depth
4D-Arm Adjustment
3"
Upper Back Torsional Movement
PAL Back System
1
2
Zodey-General Specs & Adjustability-03
Arm Height
4"
Tilt with Back Stop (6 Positions)
Forward Tilt Back Stop/Forward Tilt
Arms
(1) Arm height adjustment raises and lowers the arms to
keep the users shoulder in a neutral posture. To change the
height of the armrest, pull up on the lever and slide the
armrest up or down.
(2) Armrest side-to-side adjustment accommodates users
with various shoulder width. Grasp the armrest cap and
slide it side-to-side as needed.
(3) Armrest front-to-back adjustment allows users to get
closer to their work surface while maintaining effective use
of the backrest. Grasp the armrest and slide it forward or
backward as needed.
(4) Armrest pivot allows the user to have proper support of
the forearm when mousing or keying. To change the angle
of the armrest, grasp the armrest cap and rotate the front
of the armrest toward or away from the body.
1
2
3
4
4”