Haworth Intuity Parkbench User manual

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 1 OF 22 Rev: APart number: Parkbench
Intuity Parkbench
Installation guide

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 2 OF 22 Rev: APart number: Parkbench
Contents
Page
• 1. Introduction……………..……………………………………………….3
• 2. High table……………………………………..…………………………4
• 3. Seating table………………………….…………………….………….17
•4. Sitbench ………………………….…………………………...……….20

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 3 OF 22 Rev: APart number: Parkbench
1.Introduction
The following installation guide assumes some knowledge of the
installation of Parkbench, this guide will be updated as new
elements are released.

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 4 OF 22 Rev: APart number: Parkbench
2. High Table
High Table is composed of LH/RH leg, corner bracket, side frame and end
frame. High Table installation instruction is as following.
2.1, Install the corner bracket, connector of cross brace and glide
with leg together. One table need 2 left legs and 2 right legs.
Corner bracket
Screw Spec: M8x25
Screw QTY : 6 pc

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 5 OF 22 Rev: APart number: Parkbench
Connector of cross brace
Screw Spec: M6x20
Screw QTY : 2 pc
2.2, install the end frame, leg, and cross brace together. Pre-put
these components like below shows.

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 6 OF 22 Rev: APart number: Parkbench
Install leg with end frame
Screw Spec: M6x25
Screw QTY : 4pcs/corner bracket
(2pcs on one side, and 2pcs on
the other side)
Install leg with cross brace
Screw Spec: M6x25
Screw QTY : 2pcs/ side

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 7 OF 22 Rev: APart number: Parkbench
2.3, install leg with side frame. Put the legs and side frames as
below shows. The bottom of leg towards up.
Install side frame
Screw Spec: M6x25
Screw QTY : 2pcs/corner
bracket

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 8 OF 22 Rev: APart number: Parkbench
2.4, Install foot rest. If client hasn’t ordered, please ignore this step.
There are two options for positions of foot rail. Option 1 is outer
side, and the other installation position Option 2 is inner side.
Option 1
Option 2
Install foot rest
Screw Spec: M6x25
Screw QTY : 2pcs/side

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 9 OF 22 Rev: APart number: Parkbench
2.5, Install foot rest cover. If client hasn’t ordered, please ignore this
step. The position is decided by foot rest.
Install foot rest cover
Screw Spec: M6x10
Screw QTY : 5pcs/cover

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 10 OF 22 Rev: APart number: Parkbench
2.6, Turn over whole product to below pic shows. And fix the screws
and install the timber hook.
Fix the side frame
Screw Spec: M6x25
Screw QTY : 2pcs/corner bracket
Install timber hook
Screw Spec: ST 4.8X25
Screw QTY : 1pc/Hook

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 11 OF 22 Rev: APart number: Parkbench
2.7, Install the end cap with central tray together.
Install the end cap
Screw Spec: M4x10
Screw QTY : 3pcs/side

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 12 OF 22 Rev: APart number: Parkbench
2.8, Put worktop and central tray on the structure. Fix the worktop
and central tray. The gap between two worktops is 5mm.
Install worktop
Screw Spec: ST4.8X25
Screw QTY : 16pcs

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 13 OF 22 Rev: APart number: Parkbench
Install central tray
Screw Spec: ST4.2X19
Screw QTY : 2pcs/brk
(the distance between
the brackets should
be about 500mm)
Lateral view for understanding

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 14 OF 22 Rev: APart number: Parkbench
2.9, Install the socket section
a, Install the socket, the socket should be purchased separately.
b, Install the end cap of section,
Screw Spec: M4x10
Screw QTY : 4pcs/side
c, Stick 3pcs EVA bumper to section.
d, Put the flip cover on the section.

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 15 OF 22 Rev: APart number: Parkbench
2.10, Install the socket section and bottom cover onto central tray.
Install the section or
bottom cover
Screw Spec: M5X12
Screw QTY : 12pcs

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 16 OF 22 Rev: APart number: Parkbench
2.11, Install the fabric umbilical cord.
Install top bracket, umbilical cord and bottom bracket
together.
Then fix the top bracket with worktop.
Screw Spec: ST4.8X25
Screw QTY : 2pcs
Finish installing.

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 17 OF 22 Rev: APart number: Parkbench
3. Seating table
High table is composed of LH/RH leg, cross beam, main beam and sub
beam. Seating table installation instruction is as following.
3.1, Install the cross beam with LH/RH leg together. One table need
2 left legs and 2 right legs. And install the glide.
Install cross beam
Screw Spec: M8x25
Screw QTY : 10 pcs
Install accent plate
Screw Spec: M6x10
Screw QTY : 2 pcs
3.2, Install the accent plate.

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 18 OF 22 Rev: APart number: Parkbench
3.3, Install legs with main beams and sub beams together.
Install beams
Screw Spec: M6x25
Screw QTY : 32 pcs

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 19 OF 22 Rev: APart number: Parkbench
3.4, Install worktop, central tray, socket section and umbilical cord
follow step 2.8 ~ 2.11

HAWORTH ASIA PACIFIC PRODUCT INSTALLATION GUIDE
ECO No:UN1-013 J Page: 20 OF 22 Rev: APart number: Parkbench
4. Sitbench
Sitbench is composed of LH/RH leg, end frame, side frame, top cushion
and cushion bracket. Sitbench installation instruction is as following.
4.1, Install the end frame with LH/RH leg together. One Sitbench
need 2 left legs and 2 right legs.
Install end frame
Screw Spec: M6x20
Screw QTY : 6 pcs
4.2, Install the side frame with end frame together.
Install side frame
Screw Spec: M6x10
Screw QTY : 8 pcs