Haws 36 Series Guide

12/20 Models 3660/3661 Page 1 of 5
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
E-mail: [e-mail]  website: www.hawsco.com
No. 0510000779 (3)
MODEL 3660/3661
36XX Hose Bib Accessory
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material or
poor workmanship for a period of one year from date of shipment. HAWS liability
under this warranty shall be discharged by furnishing without charge F.O.B. HAWS
Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first-class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS, Sparks,
Nevada. HAWS will not be liable for any damages caused by defective materials or
poor workmanship, except for replacements, as provided above. Buyer agrees that
HAWS shall not be liable for general, special, or consequential damages claimed to
arise under the contract of sale. The drinking fountain manufactured by HAWS is
warranted to function if installation and maintenance instructions provided are
adhered to. The units also must be used for the purpose for which they were
intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297

12/20 Models 3660/3661 Page 2 of 5
RECOMMENDED TOOLS: 12" adjustable wrench, 5/32” tamper-resistant hex key wrench
(supplied).
LOCATION OF UNIT: The Model 3660/3661 36XX Hose Bib Accessory is designed to be
used with a Haws Model 36XX Outdoor Bottle Filler/Fountain pedestal. The hose bib can be
mounted in any side pedestal opening. When installing this unit, local, state or federal codes
should be adhered to. CAUTION!: This Hose Bib Accessory is not freeze resistant! To
prevent damage to the unit and a potential flooding hazard, do not install in locations that have
the potential to freeze.
SUPPLY LINE:
Where sediment or mineral content is a problem, an inlet filter is recommended. The minimum
recommended line size for the 3660/3661 is 1/2“ IPS with 30-90 psi (2-6 ATM) flowing
pressure.
INSTALLATION PROCEDURE
The model 3660/3661 Hose Bibs are designed for use with 36XX Outdoor Bottle Filler/Fountain
system. The hose bib can be installed in any side opening on the pedestal or relocated to a
different location later. Multiple hose bibs can be installed if desired.
1. Connect the hose bib to the backplate using the supplied 10-32 vandal-resistant screws
and hex wrench. Install the supplied jam nuts on the back side of the screws to prevent
loosening.
2. Attach the backplate to the pedestal using the supplied ¼-20 tamper-proof screws and
hex wrench.
3. Plumb the hose bib to the water supply using ½” IPS threaded connection using either
hard pipe or flexible tubing as desired.
4. Install supplied vacuum breaker on hose bib.
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1.
Insufficient water flow
(3660/3661)
1a.
b.
Verify supply line water flow.
Verify hose bib not clogged.
For more information about Haws products, see our website: www.hawsco.com
© 2020 Haws®Corporation –All Rights Reserved
HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

1
2
1
2
PAGE 3 OF 5
PARTS BREAKDOWN
MODEL 3660
LOCKABLE HOSE BIB
MODEL 3661
HOSE BIB
ITEM PART NO. DESCRIPTION
1 0110000617 VALVE, HOSE BIB
2 0110000775 VALVE, VACUUM BREAKER
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT
IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
APPROVED:
DRAWN:
PART NUMBER
SCALE:
REVISION
MH
05/17/17
3
3660 \ 3661
1:4
FV
12/23/20
DRAWING TYPE:
SIZE: A
5226
BY:
FV
PARTS BREAKDOWN
DATE:
DATE:
REV. ECN:
5620
CHK'D.:
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
DP
ECN:
WHEN ORDERING PARTS, PLEASE
SPECIFY PART NUMBER
SHEET 1 OF 1
0510000779
© 2020 Haws Corporation - All Rights Reserved.
HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.

4X 1/4"-20
TAMPER
RESISTANT
SCREWS
(SCREWS &
HEX KEY
PROVIDED)
SLIDING DOOR
SECURED BY
PADLOCK
ATTACH HOSE
BIB TO PLATE
WITH TAMPER
RESISTANT
SCREWS
(PROVIDED)
INSTALL
VACUUM
BREAKER
(PROVIDED)
4"
102mm
C
1/2" NPT (F)
SUPPLY CONNECTION
5 3
4
"
149mm
25"
634mm
ATTACH HOSE
BIB TO PLATE
WITH TAMPER
RESISTANT
SCREWS
(PROVIDED)
INSTALL
VACUUM
BREAKER
(PROVIDED)
3 1
4
"
85mm
B
1/2" NPT (F)
SUPPLY CONNECTION
25"
633mm
5 3
4
"
148mm
DETAIL B
SCALE 1 : 4
INSTALL
JAM NUTS
ON BACK
PLATE
(PROVIDED)
DETAIL C
SCALE 1 : 4
INSTALL
JAM NUTS
ON BACK
PLATE
(PROVIDED)
36XX
PEDESTAL
4X 1/4"-20
TAMPER
RESISTANT
SCREWS
(SCREWS &
HEX KEY
PROVIDED)
NOTES:
HOSE BIB IS DESIGNED TO MOUNT ON ANY AVAILABLE 36XX 1.
PEDESTAL SIDE ACCESS PLATE LOCATION.
WHEN INSTALLING THIS UNIT, LOCAL, STATE, OR FEDERAL CODES 2.
SHOULD BE ADHERED TO. INSTALL A SCREWDRIVER STOP IN THE
SUPPLY LINE IF REQUIRED.
PAGE 4 OF 5
PAGE 4 OF 5
(OPTIONAL INSTALL
LOCATIONS SHOWN)
3661
HOSE BIB
3660
LOCKABLE HOSE BIB
(OPTIONAL INSTALL
LOCATIONS SHOWN)
© 2020 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT
IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
APPROVED:
DRAWN:
PART NUMBER
SCALE:
REVISION
MH
04/24/17
3
3660/3661
1:16
JL
12/30/20
DRAWING TYPE:
SIZE: A
5226
BY:
FV
INSTALLATION
DATE:
DATE:
REV. ECN:
5620
CHK'D.:
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
DP
ECN:
SHEET 1 OF 2
0510000779.D

1/2" NPT TO COMPRESSION
ADAPTER (NOT SUPPLIED)
COMPRESSION ADAPTER
(NOT SUPPLIED)
PIPE TEE (NOT SUPPLIED)
TUBING (NOT SUPPLIED)
SUPPLY PIPE CONNECTION
TO BUBBLER/BOTTLE FILLER
SUPPLY TUBING
RECOMMENDED WATER SUPPLY CONNECTION
HAWS RECOMMENDS THE USE OF 1/2" O.D. TUBING AND FITTINGS
TO MAXIMIZE WATER PRESSURE TO FAUCET. IF FAUCET WATER
PRESSURE IS NOT A CONCERN, THE USE OF 3/8" O.D. TUBING MAY
BE SUBSTITUTED TO EASE INSTALLATION.
CAUTION! THIS HOSE BIB ACCESSORY IS NOT FREEZE RESISTANT! TO PREVENT DAMAGE TO THE UNIT AND A
POTENTIAL FLOODING HAZARD, DO NOT INSTALL IN LOCATIONS THAT HAVE THE POTENTIAL TO FREEZE.
© 2020 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT
IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
APPROVED:
DRAWN:
PART NUMBER
SCALE:
REVISION
MH
04/24/17
3
1:4
JL
12/30/20
DRAWING TYPE:
SIZE: A
5226
BY:
FV
INSTALLATION
DATE:
DATE:
REV. ECN:
5620
CHK'D.:
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
DP
ECN:
SHEET 2 OF 2
0510000779.D
3660/3661
PAGE 5 OF 5
PAGE 5 OF 5