Haws 3060 Guide

03/17 Model 3060 Page 1 of 4
No. 2077030 (17)
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
E-mail: [e-mail]  website: www.hawsco.com
Model 3060
Drinking Fountain
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material or
poor workmanship for a period of one year from date of shipment. HAWS liability
under this warranty shall be discharged by furnishing without charge F.O.B. HAWS
Factory any goods, or part there
of, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made,
the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS, Sparks,
Nevada. HAWS will not be liable for any damages caused by defective materials or
poor workmanship, except for replacements, as provided above. Buyer agrees that
HAWS shall not be liable for general, special, or consequential damages claimed to
arise under the contract of sale. The drinking fountain manufactured by HAWS is
warranted to function if installation and maintenance instructions provided are
adhered to. The units also must be used for the purpose for which they were
intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297

03/17 Model 3060 Page 2 of 4
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12"
adjustable wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket
wrench or open end wrench.
LOCATION OF UNIT: When installing Model 3060 Drinking Fountain, local, state or
federal codes should be adhered to. If height other than shown is required, then
dimensions must be adjusted accordingly.
SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6
ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter
is recommended.
PLUMBING CONNECTIONS: Inlet is female 1/4" IPS. Waste outlet is 1-1/4” O.D.
tailpiece.
MAINTENANCE: Periodically clean the strainer. Refer to 5874 Series Valve Manual
for more information.
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1.
Insufficient bubbler flow.
1a.
Check that inlet screwdriver stop
valve is in wide-open position.
b.
Verify minimum 30 psi flowing
supply pressure.
c.
Clean strainer. See 5874 Series
Valve Manual.
d.
Adjust valve to increase flow. Use
front adjust screw or see 5874
Series Valve Manual.
General Notes:
Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to
ensure correct engagement with O-Ring.
For more information about Haws products, see our website: www.hawsco.com
© 2017 Haws®Corporation – All Rights Reserved
HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

PARTS BREAKDOWN
1/2" NPT
SCREWDRIVER STOP
(NOT SUPPLIED)
1
4
STRAINER WASTE ASSY, PCP1
2BUBBLER HEAD ASSY, PCP
3
PUSH BUTTON ASSY
4BUTTON, PUSH, NON-FLANGED, PCP
5
6
5701SL
PBA7
5874PB
6461
ITEM DESCRIPTION
PLATE, ACCESS, 3060, W/ HOLE 0004499489
7
* DENOTES OPTIONAL PART.
VALVE REPAIR KIT VRK5874
*
PART NO.
1
5
1
3
1
2
7
6
VALVE, BIB FAUCET, PCP 6250LF
2 (OPTIONAL)
*
APPROVED
DRAWN
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BYECN NO.
PAGE
DATE
DATE
ECN:
REVISED PER
CHKD
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.
D> OLLOM
11/25/95
17
0002077030
3060
1:6
11
FV 07/06/17
.
VWC
3 OF 4
PARTS BREAKDOWN
5187
2017
VWC
2 (OPTIONAL)
5REF
ROTATED 90° INTO VIEW
DETAIL A
REMOVE INSERT
WITH 5/16 HEX SOCKET
(NOT SUPPLIED)
3
NOTES:
1 5874PB (ITEM 3) INCLUDES VRK5874 CARTRIDGE ASSEMBLY
(ITEM 4) AND PBA7 RECESSED PUSH BUTTON (ITEM 5).
2 USE MODEL 6250LF WITH ACCESS PLATE, PN 0004499469.
3 ENSURE TUBE IS DISCONNECTED FROM PUSH BUTTON VALVE
BODY PRIOR TO REMOVAL. APPLY ONE DROP OF LOCTITE
222MS TO NOZZLE THREADS PRIOR TO FASTENING BACK ONTO
BUBBLER HEAD. RE-ATTACH TUBE TO VALVE.

GROUND LEVEL
1/2" NPT SCREWDRIVER STOP,
1-1/4" O.D. TAILPIECE
1-1/4" IPS WASTE (NOT SUPPLIED)
(NOT SUPPLIED)
COUPLINGS
(EPOXY NOT SUPPLIED)
SECURED WITH EPOXY
MOUNTING HOLE PLUGS
STOP (NOT SUPPLIED).
1/2" NPT SCREWDRIVER
1/2" IPS SUPPLY (NOT SUPPLIED)
ACCESS PLATE
0004499489
SEE BIB DETAIL
1/2" NPT INLET
BIB DETAIL
(SUPPLIED)
3/8" O.D. TUBING (NOT SUPPLIED)
COMPRESSION FITTING, AND
VALVE INLET
TO BUBBLER
1054mm
MTG HARDWARE
3X 1/2"-13 UNC
(SUPPLIED)
41-1/2"
ON 9" [229mm] B.C.
3X 1/2" MTG BOLTS
102mm
MOUNTING DETAIL
4"
305mm
12"
BUBBLER
LOCATION
WASTE
SUPPLY 2-1/2"
64mm
1-1/4 IPS WASTE
(TO SPOUT
NOTES:
OUTLET)
3X
1 REFER TO 5874 SERIES OPERATION AND MAINTENANCE MANUAL FOR PUSH
BUTTON AND VALVE INSTALLATION/MAINTENANCE INSTRUCTIONS.
(OPTIONAL)
COMPRESSION FITTINGS
1/2" TUBING AND
(NOT SUPPLIED)
1/2" TEE (SUPPLIED)
CONCRETE PEDESTAL
(OPTIONAL)
MODEL 6250LF
BIB FAUCET
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
RF
08/90
17
0002077030.D.
3060
12:1
11
FV 07/06/17
.
VWC
4 OF 4
INSTALLATION
5187
2017
JP