Hay LBM TABLE LAMP User manual

– INSTRUCTION MANUAL –
DESIGN BY MOISÉS HERNÁNDEZ
LBM TABLE LAMP

 CARE AND MAINTENANCE 
TECHNICAL DATA
This product is supplied with an integrated LED
module (3000K warm white, 300-350 lumens).
The expected lifespan of the LED module is
25,000 hours, which equates to 810 years of
general use. When the light source reaches
its end of life, the whole luminaire should be
replaced.
FITTING TYPE | Integrated LED
POWER W | 8 W
COLOUR TEMPERATURE | 3000K warm white
ATTENTION
Ensure that the power supply to the circuit has
clearly been turned OFF before installing the
product. In some countries, electrical installation
must be carried out by authorised electricians/
contractors; please check with your local
authority for guidance.
The product must not be modified in any way.
HAY accepts no responsibility for any products
that have been modified or tampered with. The
external flexible cable or cord of this luminaire
cannot be replaced. If the cord is damaged, the
luminaire should be replaced. The light source
contained in this luminaire should be exclusively
replaced by a qualified electrician in order to
avoid an electrical hazard. This lamp is designed
for indoor use only.
CARE AND MAINTENANCE
Do not use wet or damp cloths for cleaning and
maintaining the shade. Please use a dry, lint-free
cloth or duster to remove any dirt. The product
can be cleaned with a soft damp cloth and mild
detergent, or a dry microfibre cloth. Do not use
alcohol or any other solvents to clean the product
and avoid using abrasive or rough sponges. The
external flexible cable or cord of this luminaire
cannot be replaced; if the cord is damaged,
the luminaire shall be destroyed. Ensure that
the power supply has been turned OFF before
cleaning the product.

 PARTS 
Table lamp
Power supplyAdapter

1.
Unpack the table lamp carefully from its packaging. There is no assembly
required for this lamp.

2.
Mounted on the back of the lamp is a magnetic cable management feature.
This can be manually repositioned anywhere on the backside of the lamp,
depending on how you would like the cable to trail away from the lamp.

3.
Plug the trailing cable into the power supply. Attach the correct adapter
for your region. The lamp is now ready to use.

4.
The lamp’s inline switch has a three-step dimmable feature. First push sets
the lamp to maximum brightness, second push to medium brightness and
the third push to lowest brightness. Fourth push turns the lamp off.
40% 100%
70%

Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your lighting.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
LBM Table Lamp by scanning the QR code
You can also find the same information here
hay.dk/downloads
 CARE & MAINTENANCE 

04052022
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
www.hay.com