Hay SLANT User manual

– INSTRUCTION MANUAL –
DESIGN BY BRANCH
SLANT

 INTRODUCTION 
Inspired by the power of shapes and how they impact
their surroundings, Japanese design team Branch’s
Slant Lamp features a bold graphic aesthetic that
takes possession of the space it occupies. Comprising
a simple, slanted cylindrical form with a weighted base
to keep the angle perfectly balanced, all components
are concealed within to retain the clean, elemental
silhouette. Crafted in aluminium with a satin, wet spray
finish to create a smooth finish, it utilises a standard
retro fit bulb, hidden away behind the lamp’s acrylic
diffuser, which softly distributes the light. Available
in several colour options, Slant’s sculptural design
and functional, directional light make it suitable for a
variety of home and office settings.

TECHNICAL DATA
This product is fitted with an E27 bulb
fitting. HAY recommends using this product
with LED bulbs, max. 15W. HAY will not
accept any responsibility for any accidents,
injuries or damages that occur due to the
use of incorrect bulbs.
ATTENTION
Ensure that the power supply to the
circuit has clearly been turned OFF
before installing the product. In some
countries, electrical installation must be
carried out by authorised electricians/
contractors; please check with your local
authority for guidance. The product must
not be modified in any way. HAY accepts
no responsibility for any products that
have been modified or tampered with.
If the external flexible cable or cord
of this luminaire is damaged, it should
be exclusively replaced by a qualified
electrician in order to avoid an electrical
hazard. This lamp is designed for indoor
use only.
The Slant table lamp is designed to be
used with LED based light sources only.
Halogen or incandescent light sources
should never be used, as it may cause
damage to the lamp.
CARE AND MAINTENANCE
The product can be cleaned with a soft
damp cloth and mild detergent, or a dry
microfibre cloth. Do not use alcohol or any
other solvents to clean the product and
avoid using abrasive or rough sponges.
Ensure that the power supply has been
turned OFF before cleaning the product.
 PARTS  CARE AND MAINTENANCE 

Base
Diffuser
Shade
 PARTS 
Allen key
Screws x3

1.
Place the diffuser on the base and insert and fasten the supplied screws, as shown
below. The base has a small ridge, with a corresponding groove on the diffuser, ensuring
that the two parts are correctly assembled.

2.
Screw an E27 bulb into the bulb fitting.
It is advised that a dimmable LED bulb, no more than 15W is used in this lamp.
Please note that larger globe-style bulbs will not fit in the lamp.

3.
Place the shade on top of the diffuser, as shown below, aligning the small pin on the
inside of the shade with the corresponding slot on the rim of the diffuser.

4.
Once the shade is in place, it can be secured to the base. Insert the supplied Allen key
into the two holes in the bottom and tighten the two screws that secure the shade to the
base. Take care not to overtighten the screws, as this may damage some of the internal
components.

5.
For UK customers, insert the EU plug into the converter provided. Close the converter
over the EU plug with the pins secured in the internal spring clip contacts. Screw the
converter together to ensure the UK plug is secured.
6.
The lamp is now ready for use.
1
2
3

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
03032021