Hay TURN ON User manual

– INSTRUCTION MANUAL –
DESIGN BY JOEL HOFF
TURN ON

 GENERAL INFORMATION 
TECHNICAL DATA
This product is supplied with an integrated LED
light source. The expected lifespan of the LED
light source is 25,000 hours, which equates to
810 years of general use. When the light source
reaches its end of life, the whole luminaire should
be replaced.
FITTING TYPE | Integrated LED
POWER W | 4,5W
COLOUR TEMPERATURE | 2700K warm white.
ATTENTION
Ensure that the power supply to the circuit has
clearly been turned OFF before installing the
product. In some countries, electrical installation
must be carried out by authorised electricians/
contractors; please check with your local
authority for guidance.
The product must not be modified in any way.
HAY accepts no responsibility for any products
that have been modified or tampered with. The
external flexible cable or cord of this luminaire
cannot be replaced. If the cord is damaged,
the luminaire should be replaced. This lamp is
designed for indoor use only.
CARE AND MAINTENANCE
The product can be cleaned with a soft damp
cloth and mild detergent, or a dry microfibre
cloth. Do not use alcohol or any other solvents
to clean the product and avoid using abrasive or
rough sponges. Ensure that the power supply has
been turned OFF before cleaning the product.

 PARTS 
Adapter Power supply
Base
Shade

1.
Unpack all the parts and check that you have received all the parts listed.
Twist the sphere of the lampshade clockwise onto the base of the lamp to
secure the shade. Only use light force to prevent the glass from breaking.

2.
Plug the trailing cable into the power supply.
Attach the correct adapter for your region.
The lamp is now ready for use.

4.
To operate the lamp, twist the body clockwise until it clicks to turn on.
Continue twisting the lamp to reach full brightness. The lamp can be dimmed
by twisting the body n the opposite direction. Clockwise makes it brighter,
counter-clockwise makes it dimmer.

 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your lighting.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Turn On by scanning the QR code
You can also find the same information here
hay.dk/downloads

11012022
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
www.hay.com