Hay CAN SOFA User manual

– INSTRUCTION MANUAL –
DESIGN BY RONAN & ERWAN BOUROULLEC
CAN SOFA

 PARTS 1SEATER 


A Seat frame x1  C Bag leg x2  D Armrest tube x2

B Front leg x2
 PARTS 1SEATER 

E Backrest tube x1  F Canvas x1  G Side pillow x2

H Back pillow x1  I Seat pillow x1 
J Screw x12 
K Allen key x1


A Seat frame x1

C Bag leg x2  D Armrest tube x2

B Front leg x2
 PARTS 2SEATER 

E Backrest tube x1

F Canvas x1  G Side pillow x2  H Back pillow x2

I Seat pillow x1  J Screw x12  K Allen key x1


A Seat frame x1

C Bag leg x2  D Armrest tube x2

B Front leg x2
 PARTS 3SEATER 

E Backrest tube x1

F Canvas x1  G Side pillow x2  H Back pillow x3

I Seat pillow x1  J Screw x12  K Allen key x1

1.
Locate the backside of the seat frame A, marked with a white sticker,
and insert the back legs C into each back corner.

2.
Secure the back legs C to the seat frame Aby slightly fastening one
screw  Jin the hole closest to the centre of the sofa.

3.
Pull the legs gently outwards.

4.
Insert the backrest tube

E into the middle part of the canvas.
NOTICE
2- and 3-seaters – Make sure the Backrest tube E is facing the right way.
The Backrest tube E is marked with a white sticker that should face the
outside of the sofa.

5.
Insert the backrest tube

E into both back legs

C . Make sure the canvas is
mounted with the cotton strap facing outwards. Twist  E to hear a “click”.

6.
Insert the armrest tube

D into the canvas.
Make sure the canvas is kept on the inside of the back leg C..

7.
Insert the armrest tube

D into the back leg

C .
Twist  Dto hear a “click”.

8.
Insert the front leg

B gently into the frame

A and armrest tube

D .
Repeat step 6, 7 and 8 on the other side.

9.
Gently secure the front legs B and back legs C to the frame Aby
fastening the screws Jin all four corners.
NOTICE
It is important NOT to tighten the
screws completely yet.

10.
Turn the frame forward to give easy access to the bottom of the seat frame.
Make sure to place it on the box to avoid scratching the frame.

11.
Secure the front legs

B and back legs

C to the frame

A from the bottom side
by fastening the screws  Jin all four corners.

12.
MOUNTING CANVAS
Slide the plastic profile onto the bottom of the seat frame. It is important to start at one
end and work your way to the opposite side. Make sure the canvas is fully stretched all
the way to the corners.

13.
Secure the front legs  Band back legs  Cto the frame Aby fastening the
screws  Jin all four corners.

14.
MOUNTING CANVAS
Place the cotton strap around the front leg and slide it through the leather ring. Adjust
the canvas and then tighten it by pulling the cotton strap and fastening
it to the velcro. Make sure all velcro is covered.

15.
ADJUSTING CANVAS
Adjust the canvas at the frame. Start at one end and work your way to the opposite side.
Make sure the canvas is not folded or misplaced anywhere.