Hay CPH 30 User manual

DESIGN BY RONAN & ERWAN BOUROULLEC
 INSTRUCTION MANUAL 
COPENHAGUE TABLE
30 EXTENDABLE
L160310 X W80 X H74
L200400 X W90 X H74
L250450 X W90 X H74

 PARTS 

B Table leg x1  C Table leg x1

D Allen key x1  E Screw x16

A Tabletop x1

Protect the table top from scratches and other damage while assembling.

1.
Place the legs

B and

C on the tabletop as illustrated below.
Table leg

C
Table leg

B
ATTENTION
Note that the legs are
not identical.

2.
Tighten the screws  E using the Allen key D .

3.
Make sure that the mechanism is locked, before turning the table over.
(2 people are recommended).
5.

1.
Unlock the mechanism by pulling the handle.
– EXTENDING THE TABLE WITH up to 2 leaves –
2.
Extend the table by lifting it at one or both ends and pull it towards you.

3.
Make sure to make enough space for 1 or 2 leaves.
4.
Place the table leaves at a slight angle, as illustrated below. Make sure that the pins are
securely inserted into the holes.

5.
Push both ends of the table to close the centre gap and then
lock the mechanism.
6.
 EXTRA PARTS TABLE  160 X 80 CM 
 EXTRA PARTS TABLE  200 X 90 CM & 250 X 90 CM 

 EXTRA PARTS TABLE  160 X 80 CM 
 EXTRA PARTS TABLE  200 X 90 CM & 250 X 90 CM 
Table leaf (50 x 80 cm)
MAXIMUM 3
Table leaf (50 x 90 cm)
MAXIMUM 4
Support leg - Required when
using more than 2 table leaves
Support leg - Required when
using more than 2 table leaves

1.
Unlock the mechanism by pulling the handle.
 EXTENDING THE TABLE WITH MORE THAN 2 LEAVES 
2.
Extend the table by lifting it at one or both ends and pull it towards you.

3.
Place the supporting leg into the central steel bracket. Slightly lift the mechanism if
needed.
ATTENTION
Adjust the supporting
leg glider if needed,
to make sure the table
top is level.

4.
Place the table leaves at a slight angle as illustrated below. Make sure
that the pins are securely inserted into the holes.
5.
Push both ends of the table to close the centre gap and then lock the mechanism.

6.
Adjust the supporting leg angle if needed. Lock the mechanism underneath
the tabletop.
7.

– Care & Maintenance –
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on CPH 30 Extendable by scanning the
QR code
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
01022021