Hay CPH 10 DESK User manual

– INSTRUCTION MANUAL –
L160 X W80 X H74
CPH 10 DESK
DESIGN BY BY RONAN & ERWAN BOUROULLEC


ALeg x2  BScrew x8  CScrew x24  DAllen key
 PARTS 

FTable top x1

ECrossbar x1

Protect the table top from scratches and other damage while assembling.

1.
Place the crossbar  Eon the table top  Fand fasten it with the screws  Cusing
the Allen key  D . Make sure all the screws are inserted and tightened loosely, before
tightening them completely.
ATTENTION
Be aware of the
different lengths of
the screws. Using the
incorrect screw could
damage the table.

B C

2.
Place the legs  Aon the table top  Fand fasten them with the screws  B and  C
using the Allen key  D . Make sure all the screws are inserted and tightened loosely,
before tightening them completely.
ATTENTION
Be aware of the
different lengths of
the screws. Using the
incorrect screw could
damage the table.

B C
x2 x2

B B
x8

C

3.
Turn the table over. (2 persons recommended).

4.
If the floor is uneven and the table is wobbly, you can turn the feet to adjust them up and
down to stabilise the table.

– Care & Maintenance –
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on CPH 10 Desk by scanning
the QR code
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
05032021