Hay TRIANGLE LEG TABLE User manual

– INSTRUCTION MANUAL –
DESIGN BY SIMON JONES
TRIANGLE LEG
COLLECTION

 PARTS 


A Tabletop x1

C Washer x4

D Nut x4

B Leg x4
 PARTS 

E Wrench x1

Protect the table top from scratches and other damage while assembling.

1.
Slide the bolt attached to the  Bpart through the hole in the corner fitting of
the  Apart. Thread the  C part onto the bolt and secure with the  D part.
Repeat the same procedure for all four legs.

2.
Use the  Epart to tighten the  Dpart.
Repeat the same procedure for all four legs.

3.
Turn the table over and make sure all bolts are completely tightened.
(2 persons recommended).

4.
Done!

 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Triangle Leg Collection by scanning the QR code
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
29102021