Hay CPH 30 User manual

– INSTRUCTION MANUAL –
DESIGN BY RONAN & ERWAN BOUROULLEC
L200 X W80 X H105
L200 X W90 X H74
L250 X W90 X H74
L300 X W90 X H74
CPH 30

 PARTS 


ALeg x4

GTable top x1

ECrossbar x1

FBracket x2

BScrew x16  CScrew  DAllen key
 PARTS 
L200xW80 x16
L200xW90 x16
L250xW90 x18
L300xW90 x18

Protect the table top from scratches and other damage while assembling.

1.
Mount the crossbar

E to the table top

G .. Place the brackets

Fat both ends, and
fasten with screws  C using the Allen key

D . . Insert all the screws and only tighten
them loosely. Do not tighten them completely until step 4.

B C
ATTENTION
Be aware of the
different lengths of
the screws. Using the
incorrect screw could
damage the table.

2.
Slide the legs

A in, underneath the brackets.

3.
Secure the legs with the screws

Band  C using the Allen key

D . Insert all the screws
and only tighten them loosely. Do not tighten them completely until step 4.
x4 x4
x4

B

B C

B

C
ATTENTION
Be aware of the
different lengths of
the screws. Using the
incorrect screw could
damage the table.

4.
Tighten all the screws completely. Then turn the table over.
(2 persons recommended).
ATTENTION
Tighten all the screws
completely.

5.
If the floor is uneven and the table is wobbly, you can turn the feet to adjust them up and
down to stabilise the table.

L250 X W120 X H74
L300 X W120 X H74
CPH 30
 INSTRUCTION MANUAL 

L250 X W120 X H74
L300 X W120 X H74
 PARTS 

ALeg x4

HTable top x1

FCrossbar x2

EBracket x4 
GCrossbar x2

BScrew x16  CScrew x36  DAllen key

Protect the table top from scratches and other damage while assembling.

1.
Mount the crossbars

F to the table top

H . and fasten with the screws  C using the
Allen key

D . . Insert all the screws and only tighten them loosely. Do not tighten them
completely until step 5.
ATTENTION
Be aware of the
different lengths of
the screws. Using the
incorrect screw could
damage the table.

B C

ATTENTION
Be aware of the
different lengths of
the screws. Using the
incorrect screw could
damage the table.
2.
Mount the crossbars

G . Place the brackets

Fin every corner, and fasten with the
screws  C using the Allen key

D . . Insert all the screws and only tighten them loosely.
Do not tighten them completely until step 5.

B C

3.
Slide the legs

A in, underneath the brackets

F on the table top.

4.
Secure the legs with the screws

Band  C using the Allen key

D . Insert all the screws
and only tighten them loosely. Do not tighten them completely until step 5.
ATTENTION
Be aware of the
different lengths of
the screws. Using the
incorrect screw could
damage the table.
x4 x4
x2

B

B C

B

Cx2

C

5.
Tighten all the screws completely. Then turn the table over.
(2 persons recommended).
ATTENTION
Tighten all the screws
completely.

6.
If the floor is uneven and the table is wobbly, you can turn the feet to adjust them up and
down to stabilise the table.

– Care & Maintenance –
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on CPH 30 by scanning the QR code
You can also find the same information here
hay.dk/downloads