Great Little Trading Junior Whittington L4983 User manual

1
Junior Whittington Chair
L4983
21/12/2021
V3
easy - medium - hard
Assembly Difculty
one-person job
GLTC Ltd, 12 Buckhold Road,Wandsworth, London, SW18 4GP, United Kingdom
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.

2
SAFETY WARNINGS!
•This product has been designed, manufactured and tested to comply with
BS EN 17191:2021 seating for children.
• Adult assembly required.
• Unassembled product contains small parts which may present a choking
hazard.
• Assemble and use on a at and level surface.
• Children should be kept away from the product during assembly to avoid
any possible risk of injury.
• This product is suitable for children in the age range of 5 - 8 years.
• Maximum weight load 30Kg. Do not overload.
• DO NOT place this product near a window as it can be used as a step by
the child and cause the child to fall out of the window.
• DO NOT place this product near a window where cords from blinds or
curtains could strangle a child.
• Be aware of the risk of open res and other sources of strong heat in the
vicinity of the product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• WARNING. Do not use this chair if any part becomes broken, torn
or missing. Please contact GLTC Customer Services on 0344 848 6000
immediately to arrange for suitable replacement parts.
IMPORTANT
READ CAREFULLY - KEEP FOR
FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
STEP 1:
Position the seat B against the back panel A.
A
B
A B
#1
#3
C
#2
1x Seat
Pair of Legs
8x Bolts
45mmL
1x Back Panel
2x Bolts
30mmL
10x Washers
Phillips Head Screwdriver
You will need (not supplied)
#4
10x Split Washers

4
STEP 2:
Take 2x 30mm bolts (#1) and thread on a split washer (#4) rst followed by a at
washer (#3) on to each. Screw the bolt and washer sets into the two inner drill holes
as shown.
Please note: It is recommended that you do not completely tighten the screws when
applying them individually. Wait until all hardware is in place in the stages to follow and
semi-tightened, before tightening all securely.
STEP 3:
Take 4x 45mm bolts (#2) and thread on a split washer (#4) rst followed by a at
washer (#3) on to each. Screw the bolt and washer sets into the outer drill holes (as
shown) to secure the seat panel B.
A
B
#1
#4
#3
Hardware for Step 2:
2x #3 Washers
2x #4 Split Washer
2x #1 30mmL Bolts
A
B
#3
#4
Hardware for Step 3:
4x #3 Washers
4x #4 Split Washer
4x #2 45mmL Bolts
#2
#3
#4
#2

5
STEP 4:
Position the left hand front leg C over the seat corner.
Take 2x 45mm bolts (#2) and thread on a split washer (#4) rst followed by a at
washer (#3) on to each. Screw the bolt and washer sets into drill holes.
Repeat with the right hand front leg C.
Please note: Again, it is easier to semi-tighten all the bolts rst, before going on to
tighten them all completely.
STEP 5:
Ensure all bolts are fully tightened.
Copyright© 2012 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
A
B
Hardware for Step 4:
4x #3 Washers
4x #4 Split Washer
4x #2 45mmL Bolts
C
#2
#3
#4
#2
#3
#4