i5 Industries Kai Credenza with Double Lateral Files... User manual

C2471P-4
Assembly: Credenza with
Double Lateral Files
24x71 Credenza
with 2 Lateral Files
MODELS:

Place all laminated parts on a clean and smooth surface such as •
a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware. •
Remove all wrapping materials, including staples & packing •
straps before you start to assemble.
Line up holes for cam locks. •
Put on sticker caps last. •
Keep all hardware parts out of reach of children. •
Inspect all holes to ensure their isn't any debris. •
TWO PEOPLE ARE
REQUIRED TO
ASSEMBLE AND MOVE
THIS MODEL
Required tools:
Recommended tools:
CREDENZA STORAGE
INFORMATION
Flathead or Philips
#2 Screwdriver
#2
Highly recommended when
assembling: L-shape
configuration or
attaching pedestals
4mm
Mallet recommended
when removing
lateral file tops.

PART QTY.
MODESTY PANEL 1
LEFT & RIGHT
SIDE END PANELS
1
1
TOP
2
PART QTY.
Metal Pin 15
Cam Lock 15
Set Screw 15
Cap Sticker 15
Adjustable Glide 4
Wood Dowel 15
Grommet Hole Cover 1
PARTS & HARDWARE
CREDENZA STORAGE
B
C
D
E
F
G
A
LATERAL FILE

3X (A)
3X (F)
1. HARDWARE INSTALLATION
Insert by hand only
Complete this step for both the left and right end support.
CREDENZA STORAGE
F

9X (F)
2. HARDWARE INSTALLATION
Insert by hand only
9X (A)
CREDENZA STORAGE

6X (B)
6X (C)
3. ASSEMBLE END SUPPORTS TO MODESTY CREDENZA STORAGE

4.
PLACE TOP ON ASSEMBLED MODESTY AND END SUPPORTS
CREDENZA STORAGE
(E)

1X (G)
5. PUT IN GROMMETS & PUT ON CAP STICKERS
Note: Place cap stickers (D) on any exposed holes.
CREDENZA STORAGE
6. REMOVE TOP DRAWER OF LATERAL FILES
Tab
To release drawer,
push the left tab down
and right tab up.

7. REMOVING TOP OF LATERAL FILES
Remove the 6 screws in the L-Shaped Brackets
CREDENZA STORAGE
Tap gently with mallet on the
four corners of the top to
loosen the wooden dowels.

8. INSERT LATERAL FILES INTO CREDENZA
Replace the 12 Screws
with the same L-Shape
Brackets
CREDENZA STORAGE
9. FASTEN THE LATERAL FILES TO THE CREDENZA

10. REPLACE TOP DRAWERS OF LATERAL FILES
CREDENZA STORAGE
Place drawers back on the tracks
and push them back into place.