Hay L250 CM User manual

– INSTRUCTION MANUAL –
DESIGN BY LEIF JØRGENSEN
LOOP STAND TABLE
L160 / 180 / 200 CM
L250 CM – Crossbar extension
Loop Stand Support

 INSTRUCTION MANUAL 
L160 / 180 / 200 CM

 PARTS 

A Tabletop x1

B Trestle x2

C Screw x4

 RECOMMENDED TRESTLE PLACEMENT 
180 CM
120 CM
27CM
37 CM
200 CM
120 CM
160 CM
100 CM
27 CM

1.
Place the tabletop

A on the trestles according to the recommended trestle
placement. Insert the

C parts, screwing them through the trestles and into the tabletop.
NOTICE
Make sure the table is upright
when mounting the base.

2.
Done!

 INSTRUCTION MANUAL 
L250 CM – Crossbar extension

L250 CM – Crossbar extension
 PARTS 

A Tabletop x1

B Crossbar x2

D Screw x12

C Trestle x2

 RECOMMENDED TRESTLE PLACEMENT 
92,5cm
14cm
250 CM
37 CM 50 CM
92,5 CM
14 CM

Protect the table top from scratches and other damage while assembling.

1.
Screw the  Bparts to the tabletop using the  Dparts.
Turn the tabletop over (2 persons recommended).

2.
Place the tabletop

A on the trestles according to the recommended trestle
placement. Insert the

D parts, screwing them through the trestles and into the tabletop.
NOTICE
Make sure the table is upright
when mounting the base.

3.
Done!

CAUTION
When you move your furniture, make sure you lift it rather than pulling or
pushing it. If the table is unbalanced, please spread the trestle legs in
order to align the legs.
NOTICE
Spread the trestles in order
to align the legs.


D Tabletop x1
100 CM
170cm

D Tabletop x1

E Screw x4

F Screw x18

E Screw x4

F Screw x12

E Screw x4

F Screw x12

D Tabletop x1
120 CM
170 CM
 LOOP STAND SUPPORT, OPTIONAL 

1.
Place the trestles standing upright, and slide in the support

D using the

E parts.
Do not tighten the

E parts completely in order to slide in the support

D .

2.
Tighten the  Epart to secure the support  Dto the trestle.

3.
Screw the support  D into the tabletop  Ausing the  Fparts.

4.
Done!