Hay PYRAMID 11 User manual

–INSTRUCTION MANUAL –
DESIGN BY WIM RIETVELD
PYRAMID BENCH
11 & 12

–PARTS –


A Leg section x2  C Screw x4

D Screw x4

B Seat x1
–PARTS –

F Allen key x1

E Allen key x1

Protect the benchtop from scratches and other damage while assembling.

1.
Insert each  Apart into both ends of part  B.

2.
Secure  Ato

Bby slightly tightening the  D parts.
Do not tighten completely at this stage.

3.
Secure  Ato

Bby tightening the  C parts.
Do not tighten completely at this stage.

4.
Turn the bench over (2 persons recommended).

5.
Make sure the bench is level and then tighten the  Cparts completely.

6.
Make sure the bench is level and then tighten the  Dparts completely.

7.
Done!

–CARE & MAINTENANCE –
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Pyramid Bench 11 & 12 by scanning the QR code
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
14/10/2021